u-boot.git/drivers/net/phy/phy.c, branch v2016.01

Move console definitions into a new console.h file

2015-11-20T03:27:50+00:00

The console includes a global variable and several functions that are only
used by a small subset of U-Boot files. Before adding more functions, move
the definitions into their own header file.

Signed-off-by: Simon Glass

net: phy: Add support for Texas Instruments DP83867

2015-11-19T12:09:21+00:00

Code is taken from Linux kernel driver (v4.2).

Signed-off-by: Edgar E. Iglesias 
Signed-off-by: Michal Simek 
Reviewed-by: Tom Rini 
Acked-by: Joe Hershberger

net: phy: Test previous phydev->dev against new mac dev

2015-10-29T19:05:49+00:00

In phy_connect_dev(), if the phy device has an accociated mac device
before, a warning message will be printed. But we should test the
old device against the new one, if they are actually the same one,
don't print the warning message.

Signed-off-by: Bin Meng 
Acked-by: Joe Hershberger

net: phy: Change to print all phys that are not found

2015-10-29T19:05:49+00:00

In get_phy_device_by_mask(), when no phy is found, currently we only
print a message to show the first phy address that is not found. But
this is not always the case as multiple phys can be specified by
phy_mask. Change to print all phys that are not found, and to reduce
the console boot log, change to use 'debug' instead of 'printf'.

Signed-off-by: Bin Meng 
Acked-by: Joe Hershberger

net: phy: Don't create phy device when there is no phy

2015-10-29T19:05:48+00:00

In get_phy_device_by_mask(), when no phy is found, we should not
create any phy device.

Signed-off-by: Bin Meng 
Acked-by: Joe Hershberger

net: phy: on phy device create do not initialize link to 1

2015-09-29T21:01:29+00:00

Currently when phy device is created the link variable is
initialized to 1 which denoted phy link is already up. On a power
reset there is no issue as phy status register link status will
not be set, so phy auto negotiate will be started. But when a cpu
reset is issued (ex: dra72x-evm) phy's link status bit is already
set which leads to assume that link is already setup in
genphy_update_link() initial check which results in ehternet not
working. So do not assume that link is already up and on phy
device create set link to zero. This is verified on dra72x-evm.

Reported-by: Franklin S Cooper Jr 
Signed-off-by: Mugunthan V N 
Acked-by: Joe Hershberger

net: phy: delay only if reset handler is registered

2015-08-11T18:48:25+00:00

With commit e3a77218a256edbe201112a39beeed8adcabae3f the MII bus is only
reset if a reset handler is registered. If there is no reset handler there
is no need to wait for a device to come out of the reset.

Signed-off-by: Jörg Krause

net: phy: fix data type of phy_id

2015-08-11T18:47:15+00:00

phy_id is declared as u32 in create_phy_by_mask and in struct phy_device.

Signed-off-by: Jörg Krause

net: phy: Add support for all targets which requires MANUAL_RELOC

2015-05-19T18:33:21+00:00

Targets with CONFIG_NEEDS_MANUAL_RELOC do not use REL/RELA
relocation (mostly only GOT) where functions aray are not
updated. This patch is fixing function pointers passed to phy_register
function.
This patch was tested on Microblaze architecture.

Signed-off-by: Michal Simek 
Acked-by: Joe Hershberger

net/phy: fixup for get_phy_id

2015-04-20T22:57:13+00:00

commit 3c6928fd7b0f84 "net: phy: fix warnings with W=1" caused
some PHYs(e.g. CS4315/CS4340) not working. This patch fixes the
warning and make those special PHYs working as well.

Signed-off-by: Shengzhou Liu