u-boot.git/drivers/net/phy, branch v2014.07 Unnamed repository; edit this file 'description' to name the repository. phy: fix create_phy_by_mask for when its given an actual search mask 2014-06-05T18:44:56+00:00 Cormier, Jonathan jcormier@criticallink.com 2014-05-21T17:08:52+00:00 08be2836df0b07aac65fea583b762335569fd47a get_phy_id returns -EIO when it can't read from a phy at a given addr. This would cause create_phy_by_mask to return prematurely before it had tested the other addresses in the provided mask. Example usage: Replace phydev = phy_connect(bus, phy_addr, dev, phy_if) with phydev = phy_find_by_mask(bus, phy_mask, phy_if) if (phydev) phy_connect_dev(phydev, dev); Signed-off-by: Cormier, Jonathan <jcormier@criticallink.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> 
get_phy_id returns -EIO when it can't read from a phy at a given addr.  This would cause
create_phy_by_mask to return prematurely before it had tested the other addresses in the provided mask.

Example usage:
Replace
    phydev = phy_connect(bus, phy_addr, dev, phy_if)
with
    phydev = phy_find_by_mask(bus, phy_mask, phy_if)
    if (phydev)
	phy_connect_dev(phydev, dev);

Signed-off-by: Cormier, Jonathan <jcormier@criticallink.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
net: phy/vitesse: Add support for VSC8664 phy module 2014-05-16T21:24:05+00:00 Chunhe Lan Chunhe.Lan@freescale.com 2014-04-16T08:40:52+00:00 ffc8667acf5c01e2b1ab7b7bb640ddaf2d1f2784 This patch adds support for VSC8664 PHY module which can be found on Freescale's T4240RDB boards. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 
This patch adds support for VSC8664 PHY module which can
be found on Freescale's T4240RDB boards.

Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
net/phy: enable get_phy_id redefinable 2014-05-12T19:19:45+00:00 Shengzhou Liu Shengzhou.Liu@freescale.com 2014-04-11T08:14:17+00:00 597fe041a85fe3b1bf6044adf5e132f7a5457000 As some PHYs have non-standard PHY ID registers, PHY Id can't be read correctly by current get_phy_id function, so we enable get_phy_id redefinable to permit specific PHY driver having own specific get_phy_id function. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> 
As some PHYs have non-standard PHY ID registers, PHY Id can't
be read correctly by current get_phy_id function, so we enable
get_phy_id redefinable to permit specific PHY driver having own
specific get_phy_id function.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
AR8035/phy: Enable autonegotiation function for ar8035 2014-05-12T19:19:45+00:00 Xiaobo Xie X.Xie@freescale.com 2014-04-11T08:03:11+00:00 02aa4c538838edc918ff4e7e9e4121259552ef70 Function "genphy_parse_link()" used "if (mii_reg & BMSR_ANEGCAPABLE)" before, but used "if (phydev->supported & SUPPORTED_Autoneg)" now. So assign "phydev->supported" to "phydev->drv->features" for ar8035 to enable autonegotiation. Then removed the genphy_config_aneg() function. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> 
Function "genphy_parse_link()" used "if (mii_reg & BMSR_ANEGCAPABLE)" before,
but used "if (phydev->supported & SUPPORTED_Autoneg)" now.
So assign "phydev->supported" to "phydev->drv->features" for ar8035
to enable autonegotiation. Then removed the genphy_config_aneg() function.

Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
ar8031: modify the config func of ar8031 to ar8021_config 2014-04-23T00:58:53+00:00 Zhao Qiang B45475@freescale.com 2014-04-21T02:29:24+00:00 08ad9b068afb8842df4cd559c327f54a42811a8d ar8031 has the same config steps with ar8021, so change its config func to ar8021_config instead of genphy_config. Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 
ar8031 has the same config steps with ar8021, so change its
config func to ar8021_config instead of genphy_config.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
net/phy: Fix PHY id for VSC8514 2014-04-23T00:58:47+00:00 Codrin Ciubotariu codrin.ciubotariu@freescale.com 2014-03-26T16:13:14+00:00 44afbbc0f0733381fefa159cc14931d7f711356e In the current Datasheet for VSC8514 there is a mistake, saying that the PHY id is 0x70570. The real value in the identifier registers is 0x70670. Linux PHY driver uses 0x70670 also. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Cc: York Sun <yorksun@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 
In the current Datasheet for VSC8514 there is a mistake, saying that
the PHY id is 0x70570. The real value in the identifier registers is
0x70670. Linux PHY driver uses 0x70670 also.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Cc: York Sun <yorksun@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
net/phy: Correct AR8021 phy_mask 2014-03-07T15:59:06+00:00 Haijun.Zhang Haijun.Zhang@freescale.com 2014-03-04T07:56:12+00:00 dc116bd6c4b5cb1caf6621f282ac5156d1509bef There was wrong phy_mask for AR8021 device, so the AR8021 can't be probed correctly. Changed it from 0x4fffff to 0x4ffff0. Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> 
There was wrong phy_mask for AR8021 device,
so the AR8021 can't be probed correctly.
Changed it from 0x4fffff to 0x4ffff0.

Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2014-02-25T18:55:49+00:00 Tom Rini trini@ti.com 2014-02-25T17:44:13+00:00 a7e8c15f71456d55ccb27f843862af03a00e0957 With this, fixup a trivial build error of get_effective_memsize needing to be updated in the new board/freescale/p1010rdb/spl.c Signed-off-by: Tom Rini <trini@ti.com> 
With this, fixup a trivial build error of get_effective_memsize needing
to be updated in the new board/freescale/p1010rdb/spl.c

Signed-off-by: Tom Rini <trini@ti.com>
ar8031/8033/phy:enable autonegotiation for ar8031/8033 2014-02-24T23:23:41+00:00 Zhao Qiang B45475@freescale.com 2013-12-23T07:51:33+00:00 e0d809647fb1aa01999de9a2e59349d28d48cfee Function "genphy_parse_link()" used "if (mii_reg & BMSR_ANEGCAPABLE)" before while "if (phydev->supported & SUPPORTED_Autoneg)" now. So assign "phydev->supported" to "phydev->drv->features" for ar8031/8033 to enable autonegotiation. Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 
Function "genphy_parse_link()" used "if (mii_reg & BMSR_ANEGCAPABLE)" before
while "if (phydev->supported & SUPPORTED_Autoneg)" now.
So assign "phydev->supported" to "phydev->drv->features" for ar8031/8033
to enable autonegotiation.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
net, phy: atheros ar803x bug 2014-02-19T15:47:33+00:00 Heiko Schocher hs@denx.de 2014-01-30T10:02:13+00:00 9137d19bdd321b810275f2e967e3a39165a4e8de commit 626ee1e3 "phylib: update atheros ar803x phy" leads in failing ethernet on the pxm2 board. Calling genphy_config() instead of ar8021_config(), which seems for ar8021 phys not ar803x phys, make it working again. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> 
commit 626ee1e3 "phylib: update atheros ar803x phy"

leads in failing ethernet on the pxm2 board.

Calling genphy_config() instead of ar8021_config(),
which seems for ar8021 phys not ar803x phys, make
it working again.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>