u-boot.git/drivers/net/phy, branch v2016.01

phy: atheros: Use ar8035_config for AR8031

2016-01-07T16:46:47+00:00

Commit 08ad9b068afb88 (" ar8031: modify the config func of ar8031 to
ar8021_config") selected 'ar8021_config' as the configuration function
for AR8031.

The correct would be to use 'ar8035_config' instead as AR8031/AR8035
have the same programming model and even share the same phy driver
in the linux kernel: drivers/net/phy/at803x.c.

Tested on a mx6qsabresd and wandboard, which now can work without
any PHY setup code in the board files.

Signed-off-by: Fabio Estevam 
Acked-by: Joe Hershberger

net: phy: micrel: Configure KSZ9021/KSZ9031 skew from OF

2015-12-20T02:36:49+00:00

Add code to process the KSZ9021/KSZ9031 OF props if they are present
and configure skew registers based on the information from the OF.
This code is only enabled if the DM support for ethernet is also
enabled.

Signed-off-by: Marek Vasut 
Cc: Joe Hershberger 
Cc: Chin Liang See 
Cc: Dinh Nguyen 

V2: - Implement struct ksz90x1_reg_field to describe the skew register
      fields more accurately.
    - Fix RXDV/TXEN skew register default value and offset.

net: phy: added aquantia PHY AQR405 support

2015-11-30T17:11:13+00:00

The phy can share driver with other aquantia PHYs, so we only
add PHY ID.

Signed-off-by: Shaohui Xie 
Acked-by: Joe Hershberger 
Reviewed-by: York Sun

Move console definitions into a new console.h file

2015-11-20T03:27:50+00:00

The console includes a global variable and several functions that are only
used by a small subset of U-Boot files. Before adding more functions, move
the definitions into their own header file.

Signed-off-by: Simon Glass

net: phy: Add support for Texas Instruments DP83867

2015-11-19T12:09:21+00:00

Code is taken from Linux kernel driver (v4.2).

Signed-off-by: Edgar E. Iglesias 
Signed-off-by: Michal Simek 
Reviewed-by: Tom Rini 
Acked-by: Joe Hershberger

pengwyn: nand and ethernet fixes

2015-11-12T23:13:19+00:00

-> Add National instrument ethernet transceiver configuration used (DP83848)
-> Change cpsw slave phy address
-> modify nand configuration to use the correct ECC and correct nand features

net: phy: Test previous phydev->dev against new mac dev

2015-10-29T19:05:49+00:00

In phy_connect_dev(), if the phy device has an accociated mac device
before, a warning message will be printed. But we should test the
old device against the new one, if they are actually the same one,
don't print the warning message.

Signed-off-by: Bin Meng 
Acked-by: Joe Hershberger

net: phy: Change to print all phys that are not found

2015-10-29T19:05:49+00:00

In get_phy_device_by_mask(), when no phy is found, currently we only
print a message to show the first phy address that is not found. But
this is not always the case as multiple phys can be specified by
phy_mask. Change to print all phys that are not found, and to reduce
the console boot log, change to use 'debug' instead of 'printf'.

Signed-off-by: Bin Meng 
Acked-by: Joe Hershberger

net: phy: Don't create phy device when there is no phy

2015-10-29T19:05:48+00:00

In get_phy_device_by_mask(), when no phy is found, we should not
create any phy device.

Signed-off-by: Bin Meng 
Acked-by: Joe Hershberger

net: phy: micrel: disable NAND-tree for KSZ8051

2015-10-29T19:05:48+00:00

NAND-tree is used to check wiring between MAC and PHY using NAND gates
on the PHY side, hence the name.

NAND-tree initial status is latched at reset by probing the IRQ pin.
However some devices are sharing the PHY IRQ pin with other peripherals
such as Atmel SAMA5D[34]x-EK boards when using the optional TM7000
display module, therefore they are switching the PHY in NAND-tree test
mode depending on the current IRQ line status at reset.

This patch ensure PHY is not in NAND-tree test mode only for the Micrel
KSZ8051 PHY used by Atmel. There are other Micrel PHY affected but I
doubt they are used on such weird hardware design.

Signed-off-by: Sylvain Rochet 
Acked-by: Joe Hershberger