u-boot.git/drivers/net/phy, branch v2023.07.01

net: phy: Bind ETH_PHY uclass driver to each new PHY

2023-06-10T11:34:05Z

In case a new PHY is created and DM_ETH_PHY is enabled, bind a generic PHY driver from ETH_PHY uclass to the PHY to have a matching DM representation of that PHY. Signed-off-by: Marek Vasut Reviewed-by: Ramon Fried

net: phy: Unpublish phy_connect_dev()

2023-06-10T11:34:05Z

The phy_connect_dev() is legacy API, now that there are no users, make it internal to phy.c and unpublish it from headers. Signed-off-by: Marek Vasut Reviewed-by: Ramon Fried

net: phy: Request rgmii-id phy reset gpio as output

2023-05-05T22:03:18Z

Request the reset gpio of the rgmii-id phy as output to be consistent with the eth-phy-uclass driver. Signed-off-by: Stefan Herbrechtsmeier Reviewed-by: Michal Simek

net: phy: dp83867: Explicitly check against sgmii

2023-05-05T21:48:44Z

dp83867 driver only supports sgmii and not all the newer protocols. Drop the usage of the generic phy_interface_is_sgmii function and just matchup to the specific mode supported. Reported-by: Tom Rini Suggested-by: Marek Vasut Suggested-by: Marek Behún Link: https://lore.kernel.org/all/b82ac325-4818-8e72-054b-640268dbf806@mailbox.org/ Signed-off-by: Nishanth Menon Reviewed-by: Ramon Fried

phy: realtek: don't duplicate genphy_startup

2023-05-05T21:48:44Z

rtl8211e_startup() is an exact copy of genphy_startup(). Use that instead of duplicating it. Signed-off-by: Rasmus Villemoes

phy: broadcom: don't duplicate genphy_startup

2023-05-05T21:48:44Z

Functionally, bcm_cygnus_startup() is an exact copy of genphy_startup(). Signed-off-by: Rasmus Villemoes

net: phy: gmii2rgmii: Support external rgmii-id phy

2023-05-05T21:48:44Z

Read the phy mode of the external phy from the device tree if available and check that it is a RGMII variant. Signed-off-by: Stefan Herbrechtsmeier

net: phy: marvell10g: Adapt Marvell 10G PHY driver from Linux

2023-04-07T12:21:37Z

Pull Marvell 10G PHY driver from Linux 6.1.y as of commit d6d29292640d3 ("net: phy: marvell10g: select host interface configuration") and heavily adapt to match U-Boot PHY framework. Support for hwmon is removed as is much other functionality which could not be tested, this results in much simpler driver which can only bring the PHY up and set MAC type. Signed-off-by: Marek Vasut Reviewed-by: Ramon Fried

net: phy: Add phy_modify_mmd() and phy_modify_mmd_changed() from Linux

2023-04-07T12:21:37Z

Add phy_modify_mmd()/phy_modify_mmd_changed() from Linux 5.1.y as of commit b8554d4f7288f ("net: phy: add register modifying helpers returning 1 on change") This is used by the upcoming Marvell 10G PHY driver. Signed-off-by: Marek Vasut Reviewed-by: Ramon Fried

net: phy: marvell: Import and use marvell_phy.h from Linux

2023-04-07T12:21:37Z

Import marvell_phy.h from Linux 5.14.y as of commit a5de4be0aaaa6 ("net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340") and use it in marvell PHY driver instead of current ad-hoc macros. Two of the PHY IDs are unknown to Linux, 88E1149S and 88E1680, for those two, only sync the length of the hexadecimal number to 8 digits. No functional change. Signed-off-by: Marek Vasut Reviewed-by: Ramon Fried