u-boot.git/drivers/net/ti, branch v2024.07Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/drivers/net/ti?h=v2024.072024-05-19T14:16:36ZRevert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""2024-05-19T14:16:36ZTom Rinitrini@konsulko.com2024-05-19T02:20:43Zurn:sha1:d678a59d2d719da9e807495b4b021501f2836ca5
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
net: Remove <common.h> and add needed includes2024-05-07T14:00:55ZTom Rinitrini@konsulko.com2024-05-02T01:31:02Zurn:sha1:0e407c7420c4fefd7f7e6cc7c81eeec6d084f9e4
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
Merge patch series "Introduce ICSSG Ethernet driver"2024-04-12T19:59:12ZTom Rinitrini@konsulko.com2024-04-12T19:54:51Zurn:sha1:b566f7d2392929a78e08ac5b0fba868b1b5324ff
MD Danish Anwar <danishanwar@ti.com> says:
Introduce ICSSG PRUETH support in uboot. The ICSSG driver is used in TI
AM654 SR2.0.
The ICSSG PRU Sub-system runs on EMAC firmware. This series Introduces
support for ICSSG driver in uboot.
This series has been tested on AM65x SR2.0, and the ICSSG interface is
able to ping / dhcp and boot kernel using tftp in uboot.
To use ICSSG2 ethernet, the ICSSG firmware needs to be loaded to PRU RPROC
cores and RPROC cores need to be booted with the firmware. This step is
done inside driver similar to kernel.
The remoteproc driver uses request_fw_into_buf() API from fs-loader driver
to load and start rproc with the required firmwares.
This series only introduces driver files. The device tree and config
changes to enable ICSSG driver will be introduced later.
net: ti: icssg: Add support sending FDB command to update rx_flow_id2024-04-12T19:54:43ZMD Danish Anwardanishanwar@ti.com2024-04-04T07:08:03Zurn:sha1:8ace0846725eed50c896900f889cbdb2dbaa6fe7
ICSSG firmware supports FDB commands. Add support to send FDB commands
from driver. Once rx_flow_id is obtained from dma, let firmware know that
we are using this rx_flow_id by sending a FDB command.
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
net: ti: icssg: Add ICSSG ethernet driver2024-04-12T19:54:43ZMD Danish Anwardanishanwar@ti.com2024-04-04T07:08:02Zurn:sha1:737a668413b81875a60551b44ea5fe28132a73b6
This is the PRUSS Ethernet driver for TI AM654 SR2.0 and later SoCs with
the ICSSG PRU Sub-system running EMAC firmware. ICSSG Subsystem supports
two slices per instance. This driver caters to both slices / ports of
the icssg subsystem.
Since it is not possible for Ethernet driver to register more than one
port for a given instance, this patch introduces top level PRUETH as
UCLASS_MISC and binds UCLASS_ETH to individual ports in order to support
bringing up more than one Ethernet interface in U-Boot.
Since top level driver is UCLASS_MISC, board files would need to
instantiate the driver explicitly.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
net: ti: icssg: Add icssg queues APIs and macros2024-04-12T19:54:43ZMD Danish Anwardanishanwar@ti.com2024-04-04T07:08:01Zurn:sha1:ff7799907eb348b00186700c8738883c26c85fff
Add icssg_queue.c file. This file introduces macros and APIs related to
ICSSG queues. These will be used by ICSSG Ethernet driver.
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
net: ti: icssg: Add Firmware config and classification APIs.2024-04-12T19:54:43ZMD Danish Anwardanishanwar@ti.com2024-04-04T07:08:00Zurn:sha1:1c05cb469f9d0a934c7aab88fcb6d67bd8b0862c
Add icssg_config.h / .c and icssg_classifier.c files. These are firmware
configuration and classification related files. Add MII helper APIs and
MACROs. These APIs and MACROs will be later used by ICSSG Ethernet driver.
Also introduce icssg_prueth.h which has definition of prueth related
structures.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
net: ti: icssg: Add Firmware Interface for ICSSG Ethernet driver.2024-04-12T19:54:43ZMD Danish Anwardanishanwar@ti.com2024-04-04T07:07:59Zurn:sha1:8cb5f079acd05c41203e7a5fa1ded7d1b35ef803
Add firmware interface related headers and macros for ICSSG Ethernet
driver. These macros will be later used by the ICSSG ethernet driver.
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
net: ti: am65-cpsw: Fix buffer overflow2024-04-11T21:52:19ZMichael Wallemwalle@kernel.org2024-04-03T14:31:55Zurn:sha1:0b0652737381e839a2d55c892bf9e4f1d86db21b
The device name is a concatenation of the device node name of the cpsw
device and of the device node name of the port. In my case that is
ethernet@8000000
port@1
First the buffer is really too small, but more importantly, there is no
boundary check. Use snprintf() and increase the buffer size.
Fixes: 38922b1f4acc ("net: ti: am65-cpsw: Add support for multi port independent MAC mode")
Signed-off-by: Michael Walle <mwalle@kernel.org>
net: am65-cpsw: cpsw_mdio: Switch to proper DM_MDIO framework2024-03-07T12:59:16ZRoger Quadrosrogerq@kernel.org2024-02-28T10:35:27Zurn:sha1:be2eb3ad8fa748d075e28328ab454f702d10bc4f
Add a new Kconfig symbol MDIO_TI_CPSW for the CPSW MDIO
driver and build it with proper DM support if enabled.
If MDIO_TI_CPSW is not enabled then we continue to
behave like before.
Clean up MDIO custom handling in am65-cpsw and use
dm_eth_phy_connect() to get the PHY.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Ravi Gunasekaran <r-gunasekaran@ti.com>