u-boot.git/drivers/net/tsec.c, branch v2012.07

ppc: Fix warning in TSEC Ethernet driver

2012-05-22T15:18:14+00:00

Fixes:
tsec.c: In function 'tsec_initialize':
tsec.c:638:12: warning: assignment from incompatible pointer type

Tested on MPC8313e-RDB

Signed-off-by: Joe Hershberger

powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129

2011-11-08T14:30:32+00:00

Erratum NMG_eTSEC129 (eTSEC86 in MPC8548 document) applies to some early
verion silicons. This workaround detects if the eTSEC Rx logic is properly
initialized, and reinitialize the eTSEC Rx logic.

Signed-off-by: Gong Chen 
Signed-off-by: Zhao Chenhui 
Signed-off-by: Kumar Gala

Minor coding style cleanup.

2011-05-19T20:22:44+00:00

Signed-off-by: Wolfgang Denk

tsec: Convert tsec to use PHY Lib

2011-04-20T20:09:34+00:00

This converts tsec to use the new PHY Lib.  All of the old PHY support
is ripped out.  The old MDIO driver is split off, and placed in
fsl_mdio.c.  The initialization is modified to initialize the MDIO
driver as well.  The powerpc config file is modified to configure PHYLIB
if TSEC_ENET is configured.

Signed-off-by: Mingkai Hu 
Signed-off-by: Andy Fleming 
Signed-off-by: Kumar Gala 
Acked-by: Detlev Zundel

tsec: arrange the code to avoid useless function declaration

2011-04-20T18:44:46+00:00

This is merely a rearrangement.  No changes to the code, except
to remove now-useless declarations.

Signed-off-by: Mingkai Hu 
Acked-by: Andy Fleming 
Signed-off-by: Kumar Gala 
Acked-by: Detlev Zundel

tsec: use IO accessors for IO accesses

2011-04-20T18:44:46+00:00

Signed-off-by: Mingkai Hu 
Acked-by: Andy Fleming 
Signed-off-by: Kumar Gala 
Acked-by: Detlev Zundel

tsec: add AR8021 PHY support

2011-04-04T14:24:43+00:00

Signed-off-by: Li Yang

miiphy: convert to linux/mii.h

2011-01-09T17:06:50+00:00

The include/miiphy.h header duplicates a lot of things from linux/mii.h.
So punt all the things that overlap to keep the API simple and to make
merging between U-Boot and Linux simpler.

Signed-off-by: Mike Frysinger

tsec: Revert to setting TBICR_ANEG_ENABLE by default for SGMII

2010-12-13T15:32:15+00:00

The following commit:

commit 46e91674fb4b6d06c6a4984c0b5ac7d9a16923f4
Author: Peter Tyser 
Date:   Tue Nov 3 17:52:07 2009 -0600

    tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode

Removed setting Auto-Neg by default, however this is believed to be
proper default configuration for initialization of the TBI interface.

Instead we explicitly set CONFIG_TSEC_TBICR_SETTINGS for the
XPedite5370 & XPedite5500 boards that use a Broadcomm PHY which require
Auto-Neg to be disabled to function properly.

This addresses a breakage on the P2020 DS & MPC8572 DS boards when used
with an SGMII riser card.  We also remove setting
CONFIG_TSEC_TBICR_SETTINGS on the P1_P2_RDB family of boards as now the
default setting is sufficient for them.

Additionally, we clean up the code a bit to remove an unnecessary second
define.

Signed-off-by: Kumar Gala 
Acked-by: Peter Tyser 
Tested-by: Peter Tyser

miiphy: constify device name

2010-08-09T18:52:29+00:00

The driver name does not need to be writable, so constify it.

Signed-off-by: Mike Frysinger 
Signed-off-by: Ben Warren