u-boot.git/drivers/net, branch master

treewide: Kconfig: use bool instead of tristate

2026-07-10T21:45:57Z

U-Boot does not support modules, so having tristate options is useless. Therefore this patch does a blind replace of all tristate options to bool tree-wide. Signed-off-by: Anshul Dalal Reviewed-by: Heiko Schocher Reviewed-by: Quentin Schulz Reviewed-by: Siddharth Vadapalli Reviewed-by: Neha Malcom Francis Reviewed-by: Romain Gantois Reviewed-by: Simon Glass

Merge patch series "pinctrl: add support of Airoha SoCs"

2026-07-08T19:42:17Z

Mikhail Kshevetskiy says: This patch series add pin controller and gpio driver support for EN7523/ AN7581/AN7583 SoCs. The driver based on official linux airoha pinctrl and gpio driver with Matheus Sampaio Queiroga changes. The original Matheus Sampaio Queiroga driver can be taken from the repo: https://sirherobrine23.com.br/airoha_en7523/kernel/src/branch/airoha_en7523_pinctrl Additionally in the EN7523 case the patches removes existing gpio dts nodes and replaces them with pinctrl node. It should not be very dangerous, because: * No official EN7523 gpio support present in U-Boot * Legacy Linux EN7523 GPIO driver is mostly abandoned * The same driver is planned for upstream linux/openwrt This patchset includes bitfield.h patches created for Linux kernel by Geert Uytterhoeven. It suits U-Boot fine. I preserve original author and original commit messages. Please note me, if there is a better way. The patches were tested on EN7523/AN7581/AN7583 boards. Link: https://lore.kernel.org/r/20260703115627.2317120-1-mikhail.kshevetskiy@iopsys.eu

net: hifemac: Convert to common field_{get, prep}() helpers

2026-07-08T19:29:18Z

Drop the driver-specific field_get() and field_prep() macros, in favor of the globally available variants from . Signed-off-by: Mikhail Kshevetskiy

net: hifemac: #undef field_{get, prep}() before definition

2026-07-08T19:29:18Z

Prepare for the advent of globally available common field_get() and field_prep() macros by undefining the symbols before defining local variants. This prevents redefinition warnings from the C preprocessor when introducing the common macros later. Signed-off-by: Mikhail Kshevetskiy

Merge branch 'next'

2026-07-07T00:26:12Z

Kconfig: net: restyle

2026-06-25T20:53:51Z

Restyle all Kconfigs for "net": Menu entries : no space left Menu attributes: 1 TAB Help text : 1 TAB + 2 spaces Replace '---help---' by 'help' Signed-off-by: Johan Jonker

treewide: move bi_dram[] from bd to gd

2026-06-25T00:13:24Z

Currently, the bi_dram[] information is stored in the board info structure (bd). Because bd is only valid after reserve_board(), dram_init_banksize() must be called late in the initialization process. This limitation is problematic, as it forces us to rely on a variety of bespoke functions to determine board RAM, bank memory sizes, and other early setup requirements. By moving bi_dram[] into the global data (gd), we can run it earlier. This is particularly convenient since boards define their own dram_init_banksize() routines, which do not always rely on parsing Device Tree (DT) memory nodes. Additionally, U-Boot defaults to relocating to the top of the first memory bank. While boards currently use custom functions to override this behavior, having the DRAM bank information available earlier in gd makes relocating to a different bank trivial and standardizes the process. Reviewed-by: Anshul Dalal Tested-by: Michal Simek # Versal Gen 2 Vek385 Tested-by: Anshul Dalal Reviewed-by: Simon Glass Signed-off-by: Ilias Apalodimas Tested-by: Christophe Leroy (CS GROUP)

net: mtk_eth: select LMB_LIMIT_DMA_BELOW_RAM_TOP

2026-06-24T15:06:16Z

Default to CONFIG_LMB_LIMIT_DMA_BELOW_RAM_TOP=y when MEDIATEK_ETH is enabled. The MediaTek Ethernet controller can only access the first 4GB of RAM when DMA is used. Link: https://patch.msgid.link/20260615-mtk-fix-ram-size-v2-2-f72cfc52ce58@baylibre.com Signed-off-by: David Lechner

net: airoha_eth: fix mt7531 mdio related initialization bug

2026-06-23T11:13:16Z

Private data isn't ready during bind time. The call of dev_get_priv() function will return NULL. Thus we can't save mdio device pointer and use it later during probe. To solve an issue, we will move mt7531 mdio device binding to the probing function of 'airoha-eth' driver. All GDM ports (except of GDM1) are connected directly to their PHYs, so corresponding mdio bus will be automatically probed during PHY setup. GDM1 ports differ from other GDM ports. It connected to the airoha switch device. The mt7531 mdio bus is used to manage link state of airoha switch device ports (LAN ports 1-4 corresponds to PHYs 0x09-0x0C). Therefore, manual probing of mt7531 mdio bus is required to be able set/query states of corresponding LAN ports. Fixes: 96d9e7c46425 ("net: airoha: use mt7531 mdio for GDM1") Signed-off-by: Mikhail Kshevetskiy

Merge tag 'mediatek-for-next-2026-06-10' of https://source.denx.de/u-boot/custodians/u-boot-mediatek into next

2026-06-11T13:56:19Z

* Network support for Genio 520/720. * Order drivers/net Makefile and Kconfig. * Refactor some common Airoha net/phy functions to a new common file. * Add new AN8801 chip support. * Add board-specific devicetree and config. * Use scnprintf() instead of snprintf() in mtk pinctrl. * Align configs for Genio EVK boards.