u-boot.git/drivers/net, branch v2010.03 Unnamed repository; edit this file 'description' to name the repository. net, fec_mxc: only setup the device enetaddr with eeprom value 2010-03-31T13:13:31+00:00 Heiko Schocher hs@denx.de 2010-03-31T06:34:46+00:00 b78b48c6a0c34b2991e31fc4548aaf773d34f2b3 Only fill the device enetaddr with the contents of the eeprom, do not program it in MAC address registers Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Ben Warren <biggerbadderben@gmail.com> 
Only fill the device enetaddr with the contents of the eeprom,
do not program it in MAC address registers

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
mpc82xx: Remove SL8245 board and the now orpahned sk98lin network driver. 2010-03-12T08:49:23+00:00 Detlev Zundel dzu@denx.de 2010-03-08T13:02:57+00:00 9c9cbe78dcb0afad081670cb1bdc82d227095cae This code has compile problems and the company does not even exist any more. So we take the liberty to drop support for it. Signed-off-by: Detlev Zundel <dzu@denx.de> CC: Wolfgang Denk <wd@denx.de> CC: Ben Warren <biggerbadderben@gmail.com> 
This code has compile problems and the company does not even exist any
more.  So we take the liberty to drop support for it.

Signed-off-by: Detlev Zundel <dzu@denx.de>
CC: Wolfgang Denk <wd@denx.de>
CC: Ben Warren <biggerbadderben@gmail.com>
fec_mxc: add MX25 support 2010-03-07T18:36:36+00:00 John Rigby jcrigby@gmail.com 2010-01-26T06:12:57+00:00 740d6ae5b982496fcea0666b2207cb34cc0e6015 Use RMII for MX25 Add code to init gasket that enables RMII Signed-off-by: John Rigby <jcrigby@gmail.com> CC: Ben Warren <biggerbadderben@gmail.com> 
Use RMII for MX25
Add code to init gasket that enables RMII

Signed-off-by: John Rigby <jcrigby@gmail.com>
CC: Ben Warren <biggerbadderben@gmail.com>
fec_mxc: cleanup and factor out MX27 dependencies 2010-03-07T18:36:36+00:00 John Rigby jcrigby@gmail.com 2010-01-26T06:12:55+00:00 cb17b92de03416cf4d5db5bd27ef4ae17f95e707 general cleanup move clock init to cpu_eth_init in cpu/arm926ejs/mx27/generic.c make MX27 specific phy init conditional on CONFIG_MX27 replace call to imx_get_ahbclk with one to imx_get_fecclk and define imx_get_fecclk in include/asm-arm/arch-mx27/clock.h Signed-off-by: John Rigby <jcrigby@gmail.com> CC: Ben Warren <biggerbadderben@gmail.com> CC: Fred Fan <fanyefeng@gmail.com> CC: Tom <Tom.Rix@windriver.com> 
general cleanup
move clock init to cpu_eth_init in cpu/arm926ejs/mx27/generic.c
make MX27 specific phy init conditional on CONFIG_MX27
replace call to imx_get_ahbclk with one to imx_get_fecclk
and define imx_get_fecclk in include/asm-arm/arch-mx27/clock.h

Signed-off-by: John Rigby <jcrigby@gmail.com>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: Fred Fan <fanyefeng@gmail.com>
CC: Tom <Tom.Rix@windriver.com>
fec_mxc: add support for MX51 processor 2010-02-07T06:52:18+00:00 Stefano Babic sbabic@denx.de 2010-02-01T13:51:30+00:00 4294b2485bf0e8d68c893190a96bb0e7856b12c4 The patch add support for the Freescale mx51 processor to the FEC ethernet driver. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
The patch add support for the Freescale mx51 processor
to the FEC ethernet driver.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
NET: kirkwood-egiga smi access fix 2010-02-07T06:52:14+00:00 Siddarth Gore gores@marvell.com 2010-01-19T05:39:07+00:00 e66b19ce6dbe6f91b18ba47273cbe89eb5a80e78 Although the datasheet mentions seperate smi registers for each port, using Port 1 smi register to access ethernet phys does not work. Hence only Port 0 smi register should be used to access all devices connected to the smi bus. This behavior is consistant with the mv643xx driver in the linux kernel. Signed-off-by: Siddarth Gore <gores@marvell.com> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
Although the datasheet mentions seperate smi registers for each
port, using Port 1 smi register to access ethernet phys does not
work. Hence only Port 0 smi register should be used to access all
devices connected to the smi bus. This behavior is consistant with
the mv643xx driver in the linux kernel.

Signed-off-by: Siddarth Gore <gores@marvell.com>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
new at91_emac network driver (NET_MULTI api) 2010-02-01T06:37:12+00:00 Jens Scharsig js_at_ng@scharsoft.de 2010-01-23T11:03:45+00:00 c041e9d212162f6c85cd3b6a40ad6ba9d9292451 * add's at91_emac (AT91RM9200) network driver (NET_MULTI api) * enable driver with CONFIG_DRIVER_AT91EMAC * generic PHY initialization * modify AT91RM9200 boards to use NET_MULTI driver * the drivers has been tested with LXT971 Phy and DM9161 Phy at MII and RMII interface Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
* add's at91_emac (AT91RM9200) network driver (NET_MULTI api)
* enable driver with CONFIG_DRIVER_AT91EMAC
* generic PHY initialization
* modify AT91RM9200 boards to use NET_MULTI driver
* the drivers has been tested with LXT971 Phy and DM9161 Phy at
  MII and RMII interface

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Add EP93xx ethernet driver 2010-02-01T06:37:12+00:00 Matthias Kaehlcke matthias@kaehlcke.net 2010-01-31T16:39:49+00:00 594d57d0ccce649d6ccd881b8d9c5ea8d0c307ef Added ethernet driver for EP93xx SoCs Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
Added ethernet driver for EP93xx SoCs

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
TI: DaVinci: Updating EMAC driver for DM365, DM646x and DA8XX 2010-02-01T06:37:12+00:00 Nick Thompson nick.thompson@ge.com 2009-12-18T13:33:07+00:00 d7e354374c8eb0a5d8b8226b881c5ee276c77a60 The EMAC IP on DM365, DM646x and DA830 is slightly different from that on DM644x. This change updates the DaVinci EMAC driver so that EMAC becomes operational on SOCs with EMAC v2. Signed-off-by: Nick Thompson <nick.thompson@ge.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
The EMAC IP on DM365, DM646x and DA830 is slightly different
from that on DM644x. This change updates the DaVinci EMAC driver
so that EMAC becomes operational on SOCs with EMAC v2.

Signed-off-by: Nick Thompson <nick.thompson@ge.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
macb: Fix mii_phy_read and mii_phy_write functions 2010-02-01T06:37:12+00:00 Semih Hazar semih.hazar@indefia.com 2009-12-17T13:07:15+00:00 0f751d6ef3e6fb1d28ac272c39c34831d629a59e Enabling CONFIG_CMD_MII in AVR32 boards was not possible due to compile errors. This patch fixes miiphy_read and miiphy_write functions and registers them properly. Signed-off-by: Semih Hazar <semih.hazar@indefia.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
Enabling CONFIG_CMD_MII in AVR32 boards was not possible due to
compile errors.

This patch fixes miiphy_read and miiphy_write functions and
registers them properly.

Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>