u-boot.git/drivers/net, branch v2014.07-rc2 Unnamed repository; edit this file 'description' to name the repository. net: phy/vitesse: Add support for VSC8664 phy module 2014-05-16T21:24:05+00:00 Chunhe Lan Chunhe.Lan@freescale.com 2014-04-16T08:40:52+00:00 ffc8667acf5c01e2b1ab7b7bb640ddaf2d1f2784 This patch adds support for VSC8664 PHY module which can be found on Freescale's T4240RDB boards. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 
This patch adds support for VSC8664 PHY module which can
be found on Freescale's T4240RDB boards.

Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
powerpc/85xx: add T4080 SoC support 2014-05-13T15:26:54+00:00 Shengzhou Liu Shengzhou.Liu@freescale.com 2014-04-25T08:31:22+00:00 5122dfae5d3cd68e0b6e5e08597df91ba79770aa The T4080 SoC is a low-power version of the T4160. T4080 combines 4 dual-threaded Power Architecture e6500 cores with single cluster and two memory complexes. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> 
The T4080 SoC is a low-power version of the T4160.
T4080 combines 4 dual-threaded Power Architecture e6500
cores with single cluster and two memory complexes.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
powerpc/fman/memac: use default MDIO_HOLD value 2014-05-13T15:26:54+00:00 Shaohui Xie Shaohui.Xie@freescale.com 2014-04-22T10:21:37+00:00 3a7ed5aa232da1d2836b5d3962e59e685307122e Current driver uses a Maximum value for MDIO_HOLD when doing 10G MDIO access, this is due to an errata A-006260 on T4 rev1.0 which is fixed on rev2.0, so remove the maximum value to use the default value for rev2.0. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> 
Current driver uses a Maximum value for MDIO_HOLD when doing 10G MDIO
access, this is due to an errata A-006260 on T4 rev1.0 which is fixed
on rev2.0, so remove the maximum value to use the default value for rev2.0.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
net/designware: call phy_connect_dev() to properly setup phylib device 2014-05-12T20:31:51+00:00 Ian Campbell ijc@hellion.org.uk 2014-04-28T19:14:05+00:00 15e82e5309ed706fa2878aed3b225aa48ae960c7 This sets up the linkage from the phydev back to the ethernet device. This symptom of not doing this which I noticed was: <NULL> Waiting for PHY auto negotiation to complete.... rather than: dwmac.1c50000 Waiting for PHY auto negotiation to complete.... Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> 
This sets up the linkage from the phydev back to the ethernet device. This
symptom of not doing this which I noticed was:
    <NULL> Waiting for PHY auto negotiation to complete....
rather than:
    dwmac.1c50000 Waiting for PHY auto negotiation to complete....

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
net: rename and refactor eth_rand_ethaddr() function 2014-05-12T19:19:46+00:00 Masahiro Yamada yamada.m@jp.panasonic.com 2014-04-18T10:09:48+00:00 da384a9d7628c77140023e7c095f79ecfe5a4e2d Some functions in include/net.h are ported from include/linux/etherdevice.h of Linux Kernel. For ex. is_zero_ether_addr() is_multicast_ether_addr() is_broadcast_ether_addr() is_valid_ether_addr(); So, we should use the same function name as that of Linux Kernel, eth_rand_addr(), for consistency. Besides, eth_rand_addr() has been implemented as an inline function. So it should not be surrounded by #ifdef CONFIG_RANDOM_MACADDR. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
Some functions in include/net.h are ported from
include/linux/etherdevice.h of Linux Kernel.

For ex.
  is_zero_ether_addr()
  is_multicast_ether_addr()
  is_broadcast_ether_addr()
  is_valid_ether_addr();

So, we should use the same function name as that of Linux Kernel,
eth_rand_addr(), for consistency.

Besides, eth_rand_addr() has been implemented as an inline function.
So it should not be surrounded by #ifdef CONFIG_RANDOM_MACADDR.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
net/phy: enable get_phy_id redefinable 2014-05-12T19:19:45+00:00 Shengzhou Liu Shengzhou.Liu@freescale.com 2014-04-11T08:14:17+00:00 597fe041a85fe3b1bf6044adf5e132f7a5457000 As some PHYs have non-standard PHY ID registers, PHY Id can't be read correctly by current get_phy_id function, so we enable get_phy_id redefinable to permit specific PHY driver having own specific get_phy_id function. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> 
As some PHYs have non-standard PHY ID registers, PHY Id can't
be read correctly by current get_phy_id function, so we enable
get_phy_id redefinable to permit specific PHY driver having own
specific get_phy_id function.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
AR8035/phy: Enable autonegotiation function for ar8035 2014-05-12T19:19:45+00:00 Xiaobo Xie X.Xie@freescale.com 2014-04-11T08:03:11+00:00 02aa4c538838edc918ff4e7e9e4121259552ef70 Function "genphy_parse_link()" used "if (mii_reg & BMSR_ANEGCAPABLE)" before, but used "if (phydev->supported & SUPPORTED_Autoneg)" now. So assign "phydev->supported" to "phydev->drv->features" for ar8035 to enable autonegotiation. Then removed the genphy_config_aneg() function. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> 
Function "genphy_parse_link()" used "if (mii_reg & BMSR_ANEGCAPABLE)" before,
but used "if (phydev->supported & SUPPORTED_Autoneg)" now.
So assign "phydev->supported" to "phydev->drv->features" for ar8035
to enable autonegotiation. Then removed the genphy_config_aneg() function.

Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Merge branch 'u-boot/master' 2014-05-09T09:50:14+00:00 Albert ARIBAUD albert.u.boot@aribaud.net 2014-05-09T08:47:05+00:00 d2a3e911390f9fc4d8c0ee4b3c7fc75f4fd3fd19 Conflicts: drivers/net/Makefile (trivial merge) 
Conflicts:
	drivers/net/Makefile

(trivial merge)
net: zynq: Fix sparse warnings in gem 2014-05-06T11:41:55+00:00 Michal Simek michal.simek@xilinx.com 2014-04-25T12:17:38+00:00 2fd2489b7aa36478433ae2a1f4de9f66e0a80322 Add missing header. Warnings: drivers/net/zynq_gem.c:491:5: warning: symbol 'zynq_gem_initialize' was not declared. Should it be static? drivers/net/zynq_gem.c:542:5: warning: symbol 'zynq_gem_of_init' was not declared. Should it be static? Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
Add missing header.

Warnings:
drivers/net/zynq_gem.c:491:5: warning: symbol 'zynq_gem_initialize' was not declared. Should it be static?
drivers/net/zynq_gem.c:542:5: warning: symbol 'zynq_gem_of_init' was not declared. Should it be static?

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
net: zynq: Use predefined macros instead of hardcoded value 2014-05-06T11:41:33+00:00 Michal Simek michal.simek@xilinx.com 2014-02-25T09:25:38+00:00 c1a9fa4ba67971f45ee106250340963cef7d020a MII is used by this driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
MII is used by this driver.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>