u-boot.git/drivers/net, branch v2015.01-rc2

linux/kernel.h: sync min, max, min3, max3 macros with Linux

2014-11-23T11:48:30+00:00

U-Boot has never cared about the type when we get max/min of two
values, but Linux Kernel does.  This commit gets min, max, min3, max3
macros synced with the kernel introducing type checks.

Many of references of those macros must be fixed to suppress warnings.
We have two options:
 - Use min, max, min3, max3 only when the arguments have the same type
   (or add casts to the arguments)
 - Use min_t/max_t instead with the appropriate type for the first
   argument

Signed-off-by: Masahiro Yamada 
Acked-by: Pavel Machek 
Acked-by: Lukasz Majewski 
Tested-by: Lukasz Majewski 
[trini: Fixup arch/blackfin/lib/string.c]
Signed-off-by: Tom Rini

net: macb: enable GMAC IP without GE feature support

2014-11-17T13:47:18+00:00

The User Register in GMAC IP is used to select interface type.
When with GE feature, it is used to select interface between
RGMII and GMII. If without GE feature, it is used to select
interface between MII and RMII.

Signed-off-by: Bo Shen 
Signed-off-by: Andreas Bießmann

net: macb: write mac address when initialization

2014-11-17T13:47:15+00:00

When boot up without mac address setting, it will give the warning
message like: "Warning: failed to set MAC address", however when
execute network related command, it still execute them without any
warning information.

With this patch, it will exit directly with following information:
"gmac0: mac address is not valid"

It also solve the problem after bootup then set mac address and the
mac address won't set to net device issue.

Signed-off-by: Bo Shen 
Tested-by: Boris Brezillon 
Signed-off-by: Andreas Bießmann

driver/net/fm/memac_phy: set NEG bit for external MDIOs

2014-11-14T19:12:13+00:00

NEG bit default is '1' for external MDIOs as per FMAN-v3 RM, but on some
platforms, e.g. T2080QDS, this bit is '0', which leads to MDIO failure
on XAUI PHY, so set this bit definitely to align with the RM.

Signed-off-by: Shaohui Xie 
Acked-by: Joe Hershberger 
Reviewed-by: York Sun

Fman/mEMAC: mEMAC fix for 10G MAC and PHY

2014-11-14T19:12:13+00:00

1. use Payload length check disable when enable MAC;
2. add XGMII support for setting MAC interface mode;
3. only enable auto negotiation for Non-XGMII mode;
4. return 0xffff if clause 22 is used to read 10G phy_id;

Signed-off-by: Shaohui Xie 
Signed-off-by: Roy Zang 
Acked-By: Joe Hershberger 
Reviewed-by: York Sun

drivers/net/uli526x.c: fix syntax error

2014-11-07T21:27:07+00:00

Fix error detected by cppcheck:

[drivers/net/uli526x.c:551]: (error) printf format string requires 3
parameters but only 2 are given.

Signed-off-by: Wolfgang Denk 
Cc: Roy Zang

net: smc911x: Keep MAC programmed

2014-11-07T21:27:04+00:00

Make sure to keep the MAC address programmed in the SMC911x ADDRH
and ADDRL registers. Linux can read those registers to determine
the MAC address on EEPROM-less configurations.

Signed-off-by: Marek Vasut 
Cc: Joe Hershberger 
Cc: Tom Rini

net: phy: marvell: add errata w/a for 88E151* chips

2014-11-06T16:04:38+00:00

As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512/88E1514
Rev A0, Errata Section 3.1 Marvell PHY has an errata which requires
that certain registers get written in order to restart
autonegotiation.

Signed-off-by: Hao Zhang 
Signed-off-by: Ivan Khoronzhuk 
Reviewed-by: Stefan Roese

net: keystone_net: add Keystone2 K2L SoC support

2014-11-05T18:09:42+00:00

The Keystone2 Lamar SoC uses the same keystone net driver.
This patch adds opportunity to use it by K2L SoCs.

Acked-by: Murali Karicheri 
Signed-off-by: Ivan Khoronzhuk

net: keystone_serdes: add keystone K2L SoC support

2014-11-05T18:09:42+00:00

Keystone2 Lamar SoC uses the same keystone SerDes driver.
All Keystone2 EVM boards currently use SerDes driver, so move
CONFIG_TI_KEYSTONE_SERDES to common configuration file.

Acked-by: Murali Karicheri 
Signed-off-by: Ivan Khoronzhuk