u-boot.git/drivers/net, branch v2015.10

net: fix netconsole when CONFIG_DM_ETH is set

2015-09-30T02:54:45+00:00

This patch uses the eth_is_active() function to work around
issues that prevented compilation with the newer driver model.

Signed-off-by: Bernhard Nortmann 
Acked-by: Joe Hershberger

net: phy: on phy device create do not initialize link to 1

2015-09-29T21:01:29+00:00

Currently when phy device is created the link variable is
initialized to 1 which denoted phy link is already up. On a power
reset there is no issue as phy status register link status will
not be set, so phy auto negotiate will be started. But when a cpu
reset is issued (ex: dra72x-evm) phy's link status bit is already
set which leads to assume that link is already setup in
genphy_update_link() initial check which results in ehternet not
working. So do not assume that link is already up and on phy
device create set link to zero. This is verified on dra72x-evm.

Reported-by: Franklin S Cooper Jr 
Signed-off-by: Mugunthan V N 
Acked-by: Joe Hershberger

drivers/net/vsc9953: Add GPL-2.0+ SPDX-License-Identifier

2015-09-21T15:29:48+00:00

Signed-off-by: Codrin Ciubotariu 
Acked-by: Joe Hershberger 
Reviewed-by: York Sun

drivers/net/vsc9953: Add commands for VLAN ingress filtering

2015-09-21T15:29:48+00:00

The command:
ethsw [port ] ingress filtering
     { [help] | show | enable | disable }
  - enable/disable VLAN ingress filtering on port

can be used to enable/disable/show VLAN ingress filtering on a port.
This command has also been added to the ethsw generic parser
from common/cmd_ethsw.c

Signed-off-by: Johnson Leung 
Signed-off-by: Codrin Ciubotariu 
Acked-by: Joe Hershberger 
Reviewed-by: York Sun

drivers/net/vsc9953: Add command for shared/private VLAN learning

2015-09-21T15:29:48+00:00

The command:
ethsw vlan fdb { [help] | show | shared | private }
 - make VLAN learning shared or private"

configures the FDB to share the FDB entries learned on multiple VLANs
or to keep them separated. By default, the FBD uses private VLAN
learning. This command has also been added to the ethsw generic parser
from common/cmd_ethsw.c

Signed-off-by: Johnson Leung 
Signed-off-by: Codrin Ciubotariu 
Acked-by: Joe Hershberger 
Reviewed-by: York Sun

drivers/net/vsc9953: Add VLAN commands for VSC9953

2015-09-21T15:29:48+00:00

The new added commands can be used to configure VLANs for a port
on both ingress and egress.

The new commands are:
ethsw [port ] pvid { [help] | show |  }
 - set/show PVID (ingress and egress VLAN tagging) for a port;
ethsw [port ] vlan { [help] | show | add  | del  }
 - add a VLAN to a port (VLAN members);
ethsw [port ] untagged { [help] | show | all | none | pvid }
 - set egress tagging mod for a port"
ethsw [port ] egress tag { [help] | show | pvid | classified }
 - Configure VID source for egress tag. Tag's VID could be the
   frame's classified VID or the PVID of the port
These commands have also been added to the ethsw generic parser from
common/cmd_ethsw.c

Signed-off-by: Johnson Leung 
Signed-off-by: Codrin Ciubotariu 
Acked-by: Joe Hershberger 
Reviewed-by: York Sun

drivers/net/vsc9953: Add commands to manipulate the FDB for VSC9953

2015-09-21T15:29:47+00:00

The new command:
ethsw [port ] [vlan ] fdb
        { [help] | show | flush | { add | del }  }

Can be used to add and delete FDB entries. Also, the command can be used
to show entries from the FDB tables. When used with [port ]
and [vlan ], only the matching the FDB entries can be seen or
flushed. The command has also been added to the generic ethsw parser
from cmd_ethsw.c.

Signed-off-by: Johnson Leung 
Signed-off-by: Codrin Ciubotariu 
Acked-by: Joe Hershberger 
Reviewed-by: York Sun

drivers/net/vsc9953: Add commands to enable/disable HW learning

2015-09-21T15:29:47+00:00

The command:
ethsw [port ] learning { [help] | show | auto | disable }

can be used to enable/disable HW learning on a port.
This patch also adds this command to the generic ethsw parser from
cmd_ethsw.

Signed-off-by: Johnson Leung 
Signed-off-by: Codrin Ciubotariu 
Acked-by: Joe Hershberger 
Reviewed-by: York Sun

drivers/net/vsc9953: Add command to show/clear port counters

2015-09-21T15:29:47+00:00

The new added command:
ethsw [port ] statistics { [help] | [clear] }

will print counters like the number of Rx/Tx frames,
number of Rx/Tx bytes, number of Rx/Tx unicast frames, etc.
This patch also adds this commnd in the genereric ethsw
parser from cmd_ethsw.c

Signed-off-by: Codrin Ciubotariu 
Acked-by: Joe Hershberger 
Reviewed-by: York Sun

drivers/net/vsc9953: Use the generic Ethernet Switch parser

2015-09-21T15:29:47+00:00

This patch replaces the parser used by VSC9953 L2 Switch driver with
the generic one. Also, the config macro that enables the
VSC9953 commands has been replaced in all the platforms that
use this driver with the config macro that corresponds to the
generic parser.

Signed-off-by: Codrin Ciubotariu 
Acked-by: Joe Hershberger 
Reviewed-by: York Sun