u-boot.git/drivers/net, branch v2017.05-rc1

Merge git://www.denx.de/git/u-boot-marvell

2017-04-04T13:17:56Z

This includes Marvell mvpp2 patches with the ethernet support for the ARMv8 Armada 7k/8k platforms. The ethernet patches are all acked by Joe and he is okay with me pushing them via the Marvell tree.

Merge git://git.denx.de/u-boot-fsl-qoriq

2017-04-04T13:17:08Z

net: mvpp2: Remove unreferenced in_use_thresh from struct mvpp2_bm_pool

2017-03-29T05:44:37Z

As pointed out by Stefan Chulski, this variable is unused and should be removed. Signed-off-by: Stefan Roese Cc: Stefan Chulski Acked-by: Joe Hershberger

net: mvpp2: Configure SMI PHY address needed for PHY polling

2017-03-29T05:44:32Z

On PPv2.2 we enable PHY polling, so we also need to configure the PHY address in the specific PHY address rgisters. Signed-off-by: Stefan Roese Cc: Stefan Chulski Cc: Kostya Porotchkin Cc: Nadav Haklai Acked-by: Joe Hershberger

net: mvpp2: Enable PHY polling mode on PPv2.2

2017-03-29T05:44:26Z

Testing shows, that PHY polling needs to be enabled on Armada 7k/8k. Otherwise ethernet transfers will not work correctly. PHY polling is enabled per default after reset, so we do not need to specifically enable it, but this makes it clearer. Signed-off-by: Stefan Roese Cc: Stefan Chulski Cc: Kostya Porotchkin Cc: Nadav Haklai Acked-by: Joe Hershberger

net: mvpp2: Add missing PHY_INTERFACE_MODE_RGMII_ID

2017-03-29T05:44:11Z

Add a missing occurrance of PHY_INTERFACE_MODE_RGMII_ID, which should be handled identical to PHY_INTERFACE_MODE_RGMII. Signed-off-by: Stefan Roese Cc: Stefan Chulski Cc: Kostya Porotchkin Cc: Nadav Haklai Acked-by: Joe Hershberger

net: mvpp2: Add GoP and NetC support for port 0 (SFI)

2017-03-29T05:44:02Z

This patch adds the GoP (Group of Ports) and NetC (Net Complex) setup to the Marvell mvpp2 ethernet driver for the missing port 0. This code is mostly copied from the Marvell U-Boot version and was written by Stefan Chulski. Please note that only SFI support have been added, as this is the only interface that this code has been tested with. XAUI and RXAUI support might follow at a later stage. Signed-off-by: Stefan Roese Cc: Stefan Chulski Cc: Kostya Porotchkin Cc: Nadav Haklai Acked-by: Joe Hershberger

net: mvpp2: Add GoP and NetC support for ports 2 & 3 (RGMII & SGMII)

2017-03-29T05:43:42Z

This patch adds the GoP (Group of Ports) and NetC (Net Complex) setup to the Marvell mvpp2 ethernet driver. This code is mostly copied from the Marvell U-Boot version and was written by Stefan Chulski. Please note that only RGMII and SGMII support have been added, as these are the only interfaces that this code has been tested with. Signed-off-by: Stefan Roese Cc: Stefan Chulski Cc: Kostya Porotchkin Cc: Nadav Haklai Acked-by: Joe Hershberger

net: mvpp2: Read phy-speed from DT to select between 1GB and 2.5GB SGMII

2017-03-29T05:43:20Z

Read the "phy-speed" DT property to differentiate between 1 and 2.5GB SGMII operations. Please note that its unclear right now, if this DT property will be accepted in mainline Linux. If not, we need to revisit this code and change it to use the accepted property. Signed-off-by: Stefan Roese Acked-by: Joe Hershberger

net: mvpp2: Restructure probe / init functions

2017-03-29T05:42:59Z

This patch does a bit of restructuring of the probe / init functions, mainly to allow earlier register access as it is needed for the upcoming GoP (Group of Ports) and NetC (Net Complex) code. Signed-off-by: Stefan Roese Acked-by: Joe Hershberger