u-boot.git/drivers/net, branch v2017.09-rc2

driver: net: ldpaa: Update priv->phydev after free()

2017-08-14T17:47:33+00:00

Even after memory free of phydev, priv is still pointing to the
obsolete address.
So update priv->phydev as NULL after memory free.

Signed-off-by: Prabhakar Kushwaha 
Signed-off-by: Ashish Kumar 
Acked-by: Joe Hershberger

net: fman: add support RGMII_TXID to memac

2017-08-14T17:47:32+00:00

Signed-off-by: Madalin Bucur 
Acked-by: Joe Hershberger

net: gmac_rockchip: Add support for the RK3368 GMAC

2017-08-13T15:12:33+00:00

The GMAC in the RK3368 once again is identical to the incarnation in
the RK3288 and the RK3399, except for where some of the configuration
and control registers are located in the GRF.

This adds the RK3368-specific logic necessary to reuse this driver.

Signed-off-by: Philipp Tomsich 
Reviewed-by: Simon Glass 
Acked-by: Joe Hershberger

Merge git://git.denx.de/u-boot-fsl-qoriq

2017-08-11T11:10:18+00:00

net: mvpp2x: Set BM poll size once during priv probe

2017-08-10T06:33:02+00:00

Set BM poll size once during priv probe and do not
overwrite it during port probe procedure. Pool is common for
all CP ports.

Signed-off-by: Stefan Chulski 
Tested-by: iSoC Platform CI 
Reviewed-by: Nadav Haklai 
Reviewed-by: Igal Liberman 
Acked-by: Joe Hershberger 
Signed-off-by: Stefan Roese

net: mvpp2x: remove TX drain from transmit routine

2017-08-10T06:33:02+00:00

TX drain in transmit procedure could cause issues due
to race between drain procedure and transmition of descriptor
between AGGR TXQ and physical TXQ.
TXQ will be cleared before moving to Linux by stop procedure.

Signed-off-by: Stefan Chulski 
Tested-by: iSoC Platform CI 
Reviewed-by: Nadav Haklai 
Reviewed-by: Igal Liberman 
Acked-by: Joe Hershberger 
Signed-off-by: Stefan Roese

net: mvpp2x: Set BM pool high address

2017-08-10T06:33:02+00:00

MVPP22 driver support 64 Bit arch and require BM pool
high address configuration.

Signed-off-by: Stefan Chulski 
Tested-by: iSoC Platform CI 
Reviewed-by: Nadav Haklai 
Reviewed-by: Igal Liberman 
Acked-by: Joe Hershberger 
Signed-off-by: Stefan Roese

net: mvpp2x: Remove IRQ configuration from U-Boot

2017-08-10T06:33:02+00:00

Remove IRQ configuration from U-Boot PP driver.
U-Boot don't use interrupts and configuration of IRQ in U-Boot
caused crashes in Linux shared interrupt mode.
Also interrupt use is redundant in RX routine since a single RX
queue is used.

Signed-off-by: Stefan Chulski 
Tested-by: iSoC Platform CI 
Reviewed-by: Nadav Haklai 
Reviewed-by: Igal Liberman 
Acked-by: Joe Hershberger 
Signed-off-by: Stefan Roese

net: mvpp2x: remove MBUS configurations from MvPP22 driver

2017-08-10T06:33:02+00:00

MBUS driver were replaced by AXI in PPv22 and relevant
only for PPv21.

Signed-off-by: Stefan Chulski 
Tested-by: iSoC Platform CI 
Reviewed-by: Nadav Haklai 
Reviewed-by: Igal Liberman 
Acked-by: Joe Hershberger 
Signed-off-by: Stefan Roese

net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK

2017-08-10T06:33:02+00:00

U-boot use single physical tx queue with size 16 descriptors.
So aggregated tx queue size should be equal to physical tx queue
and cpu descriptor chunk(number of descriptors delivered from
physical tx queue to aggregated tx queue by one chunk) shouldn't be
larger than physical tx queue.

Fix:
Set AGGR_TXQ and CPU_DESC_CHUNK to be 16 descriptors, same as
physical TXQ.

Signed-off-by: Stefan Chulski 
Tested-by: iSoC Platform CI 
Reviewed-by: Nadav Haklai 
Reviewed-by: Igal Liberman 
Acked-by: Joe Hershberger 
Signed-off-by: Stefan Roese