u-boot.git/drivers/net, branch v2018.03-rc1

mvpp2: Fix warning over 32bit vs 64bit targets

2018-01-29T17:48:34Z

When we have a driver that is used on both 32bit and 64bit targets and we are talking about address space we cannot use u64 nor u32 and instead need to use phys_addr_t. Fixes: 377883f16d36 ("net: mvpp2x: fix phy connected to wrong mdio issue") Cc: Stefan Chulski Signed-off-by: Tom Rini Reviewed-by: Stefan Roese Reviewed-by: Joe Hershberger

net: gmac_rockchip: Add support for the RK3228 GMAC

2018-01-28T16:12:38Z

The GMAC in the RK3228 once again is identical to the incarnation in the RK3288 and the RK3399, except for where some of the configuration and control registers are located in the GRF. This adds the RK3368-specific logic necessary to reuse this driver. Signed-off-by: David Wu Acked-by: Philipp Tomsich Reviewed-by: Philipp Tomsich

net: gmac_rockchip: Add rk3328 gmac support

2018-01-28T16:12:37Z

The GMAC2IO in the RK3328 once again is identical to the incarnation in the RK3288 and the RK3399, except for where some of the configuration and control registers are located in the GRF. This adds the RK3328-specific logic necessary to reuse this driver. Signed-off-by: David Wu Acked-by: Philipp Tomsich Reviewed-by: Philipp Tomsich

net: gmac_rockchip: Add support for the RV1108 GMAC

2018-01-28T16:12:37Z

The rv1108 GMAC only support rmii interface, so need to add the set_rmii() ops. Use the phy current interface to set rmii or rgmii ops. At the same time, need to set the mac clock rate of rmii with 50M, the clock rate of rgmii with 125M. Signed-off-by: David Wu Acked-by: Philipp Tomsich Reviewed-by: Philipp Tomsich

Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-sh

2018-01-27T23:25:00Z

net: sh_eth: Add DM and DT support

2018-01-27T19:38:53Z

Add DM capable code into the SH ethernet driver and support probing both from DT and pdata. The legacy non-DM, non-DT support is retained as there are still systems in the tree which are not DM or DT capable. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu Cc: Joe Hershberger

net: sh_eth: Clump legacy functions together

2018-01-27T19:38:53Z

Move the legacy functions around, so that they can be wrapped in a massive ifdef CONFIG_DM_ETH once DM support is added. No functional change. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu Cc: Joe Hershberger

net: sh_eth: Split sh_eth_init

2018-01-27T19:38:53Z

Split sh_eth_init() function into smaller chunks, which can be called from both DM and non-DM code while handling the specifics of both configurations. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu Cc: Joe Hershberger

net: sh_eth: Separate out MAC address programming

2018-01-27T19:38:53Z

Pull out the code for writing MAC address into the NIC into a separate function, so it can be reused by both DM and non-DM code. This is done in preparation for DM support, which handles MAC address programming separately. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu Cc: Joe Hershberger

net: sh_eth: Split sh_eth_recv

2018-01-27T19:38:53Z

Split sh_eth_recv into two functions, one which checks whether a packet was received and one which handles the received packet. This is done in preparation for DM support, which handles these two parts separately. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu Cc: Joe Hershberger