u-boot.git/drivers/net, branch v2020.07-rc3Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/drivers/net?h=v2020.07-rc32020-05-22T17:46:45Znet: ks8851: Add Kconfig entries2020-05-22T17:46:45ZMarek Vasutmarex@denx.de2020-03-25T18:08:59Zurn:sha1:df4c4834fc008315bce2f978220ecc9da2e3862c
Convert CONFIG_KS8851_MLL and CONFIG_KS8851_MLL_BASEADDR to Kconfig
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
net: ks8851: Add DM support2020-05-22T17:46:45ZMarek Vasutmarex@denx.de2020-03-25T17:00:35Zurn:sha1:1d476de7c8fbb93aab95dd5b522488ca4bfdc5a0
Add support for U-Boot DM and DT probing.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
net: ks8851: Receive one packet per recv call2020-05-22T17:46:45ZMarek Vasutmarex@denx.de2020-03-25T17:47:10Zurn:sha1:9c9f3fc162ecbe1295ddf249e288a5a4739f5e07
Instead of reading out the entire FIFO and possibly overwriting U-Boot
memory, read out one packet per recv call, pass it to U-Boot network
stack, and repeat. It is however necessary to cache RXFC value, because
reading that one out clears it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
net: ks8851: Split non-DM specific bits from common code2020-05-22T17:46:45ZMarek Vasutmarex@denx.de2020-03-25T16:54:45Zurn:sha1:f725912624878faf7c552dd686425e0e14e75a8b
Split network handling functions into non-DM specific parts and
common code in preparation for conversion to DM.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
net: ks8851: Pass around driver private data2020-05-22T17:46:45ZMarek Vasutmarex@denx.de2020-03-25T16:35:00Zurn:sha1:b7c6ae2e82832b98572a538ddfe7c365c07f57d9
Introduce a private data structure for this driver with embedded
struct eth_device and pass it around. This prepares the driver to
work with both DM and non-DM systems.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
net: ks8851: Checkpatch cleanup2020-05-22T17:46:45ZMarek Vasutmarex@denx.de2020-03-25T16:25:29Zurn:sha1:8ec27b01bc8b492a3aacc76a299f4e24b1a44d0c
Fix various checkpatch complaints.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
net: ks8851: Clean up chip ID readout2020-05-22T17:46:45ZMarek Vasutmarex@denx.de2020-03-25T17:15:46Zurn:sha1:eb69d8bf3c043f126077e6b0905def8cca5c4723
There is only one chip ID in the table of chip IDs for this chip.
Read out the chip ID instead and mask off the last "revision" bit
to check the chip ID, this works for all chips in the family. Then
drop the chip ID passing around.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
net: ks8851: Remove type_frame_head2020-05-22T17:46:45ZMarek Vasutmarex@denx.de2020-03-25T16:23:11Zurn:sha1:63f22f5998bc813ae5eacbf9210aa15cf80c0177
The packet status and length information should be extracted from the
FIFO per-packet. Adjust the code such that it reads the packet meta
data and then the packet afterward, if applicable.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
net: ks8851: Trim down struct ks_net2020-05-22T17:46:45ZMarek Vasutmarex@denx.de2020-03-25T16:18:55Zurn:sha1:b043597673855932bb824b3b4d73935ef47094bd
Most of the entries in the structure are useless, remove them. Inline
the rest of uses where applicable.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
net: ks8851: Use 16bit RXQCR access2020-05-22T17:46:45ZMarek Vasutmarex@denx.de2020-03-25T16:02:51Zurn:sha1:6a457313642525feacdfea973dbabd639f5b3261
Per KS8851-16MLL, the RXQCR is a 16bit register. Use 16bit accessors
to it consistently and drop the ks_wrreg8() function altogether, as
it is not used anymore.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>