u-boot.git/drivers/net, branch v2021.10 Unnamed repository; edit this file 'description' to name the repository. pci: Drop DM_PCI 2021-09-13T22:23:13+00:00 Simon Glass sjg@chromium.org 2021-08-02T00:54:44+00:00 3232bdf0b30b057ace64f192bc55a0bed4199770 This option has not effect now. Drop it, using PCI instead where needed. Signed-off-by: Simon Glass <sjg@chromium.org> 
This option has not effect now. Drop it, using PCI instead where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
net: Drop DM_PCI check from designware driver 2021-09-13T22:23:13+00:00 Simon Glass sjg@chromium.org 2021-08-02T00:54:34+00:00 e882a59ef1b293b6af496c3bd8417f648315a42f We don't need this check anymore since when PCI is enabled, driver model is always used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> 
We don't need this check anymore since when PCI is enabled, driver model
is always used.

Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
net: cortina: Add support for tfa boot in cortina firmware 2021-08-18T10:25:15+00:00 Kuldeep Singh kuldeep.singh@nxp.com 2021-08-10T05:50:08+00:00 5528c90e2dd801c35e0c7a4c9deb84f37d15ca08 Add support for boards supporting TFA boot separately in cortina firmware. Please note, a weak function is defined to retrieve firmware address values as CONFIG_CORTINA_FW_ADDR is now defined in defconfig and can only have one possible value defined. This weak function will help in overwrting the values to get proper addresses as per boot source. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> 
Add support for boards supporting TFA boot separately in cortina
firmware. Please note, a weak function is defined to retrieve firmware
address values as CONFIG_CORTINA_FW_ADDR is now defined in defconfig and
can only have one possible value defined. This weak function will help
in overwrting the values to get proper addresses as per boot source.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
configs: Migrate CORTINA_FW_ADDR and CORTINA_FW_LENGTH to Kconfig 2021-08-18T10:25:15+00:00 Kuldeep Singh kuldeep.singh@nxp.com 2021-08-10T05:50:07+00:00 e99b1dfcb78229845058c8045031a9508813e0d7 Use moveconfig.py script to convert below defines to Kconfig and move these entries to defconfigs. CONFIG_CORTINA_FW_ADDR CONFIG_CORTINA_FW_LENGTH Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> 
Use moveconfig.py script to convert below defines to Kconfig and move
these entries to defconfigs.
    CONFIG_CORTINA_FW_ADDR
    CONFIG_CORTINA_FW_LENGTH

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
net: fec_mxc: support i.MX8ULP 2021-08-09T12:46:50+00:00 Peng Fan peng.fan@nxp.com 2021-08-07T08:00:42+00:00 06918de45ddedff66ec178d6ed5f26dc847b660e Support i.MX8ULP in fec_mxc Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> 
Support i.MX8ULP in fec_mxc

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
global: Convert simple_strtoul() with decimal to dectoul() 2021-08-02T17:32:14+00:00 Simon Glass sjg@chromium.org 2021-07-24T15:03:30+00:00 0b1284eb52578e15ec611adc5fee1a9ae68dadea It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org> 
It is a pain to have to specify the value 10 in each call. Add a new
dectoul() function and update the code to use it.

Signed-off-by: Simon Glass <sjg@chromium.org>
global: Convert simple_strtoul() with hex to hextoul() 2021-08-02T17:32:14+00:00 Simon Glass sjg@chromium.org 2021-07-24T15:03:29+00:00 7e5f460ec457fe310156e399198a41eb0ce1e98c It is a pain to have to specify the value 16 in each call. Add a new hextoul() function and update the code to use it. Add a proper comment to simple_strtoul() while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> 
It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
net: xilinx: axi_mrmac: Add MRMAC driver 2021-07-26T07:18:45+00:00 Ashok Reddy Soma ashok.reddy.soma@xilinx.com 2021-07-02T10:40:34+00:00 258ce79cfce4b17b4afe867353c0365cc3c26b46 Add support for xilinx multirate(MRMAC) ethernet driver. This driver uses multichannel DMA(MCDMA) for data transfers of MRMAC. Added support for 4 ports of MRMAC for speeds 10G and 25G. MCDMA supports upto 16 channels but in this driver we have setup only one channel which is enough. Tested 10G and 25G on all 4 ports. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
Add support for xilinx multirate(MRMAC) ethernet driver.
This driver uses multichannel DMA(MCDMA) for data transfers of MRMAC.
Added support for 4 ports of MRMAC for speeds 10G and 25G.
MCDMA supports upto 16 channels but in this driver we have setup only
one channel which is enough.

Tested 10G and 25G on all 4 ports.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
board: synquacer: Initialize SCBM SMMU at board_init() 2021-07-23T22:53:45+00:00 Masami Hiramatsu masami.hiramatsu@linaro.org 2021-07-12T10:35:44+00:00 1ad3c8365a7d47f16a11db084e38c3604639fd68 Since the SCBM SMMU is not only connected to the NETSEC but also shared with the F_SDH30 (eMMC controller), that should be initialized at board level instead of NETSEC. Move the SMMU initialization code into board support and call it from board_init(). Without this fix, if the NETSEC is disabled, the Linux eMMC ADMA cause an error because SMMU is not initialized. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> 
Since the SCBM SMMU is not only connected to the NETSEC
but also shared with the F_SDH30 (eMMC controller), that
should be initialized at board level instead of NETSEC.

Move the SMMU initialization code into board support
and call it from board_init().

Without this fix, if the NETSEC is disabled, the Linux
eMMC ADMA cause an error because SMMU is not initialized.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
net: fsl-mc: fix logically dead code 2021-07-22T19:16:26+00:00 Cosmin-Florin Aluchenesei aluchenesei.cosmin-florin@nxp.com 2021-07-21T16:13:33+00:00 669884ea6f290e5ec912a2fe4d10c687a04cd239 The result of dpio_close() is actually taken into account. Signed-off-by: Cosmin-Florin Aluchenesei <aluchenesei.cosmin-florin@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> 
The result of dpio_close() is actually taken into account.

Signed-off-by: Cosmin-Florin Aluchenesei <aluchenesei.cosmin-florin@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>