u-boot.git/drivers/pci.c, branch master Unnamed repository; edit this file 'description' to name the repository. drivers/pci : move pci drivers to drivers/pci 2007-11-24T19:35:55+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2007-11-20T19:28:09+00:00 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug 2007-08-18T19:38:45+00:00 Shinya Kuribayashi shinya.kuribayashi@necel.com 2007-08-17T03:43:44+00:00 815b5bd5b18569917c3e04b9757511e6ed23b9f6 This patch has been sent on: - 6 Jun 2007 Many users of PCI config read routines tend to ignore the function ret value, and are only concerned about the contents of *val. Based on this, pci_hose_read_config_{byte,word}_via_dword should initialize the *val on dword read error. Without this fix, for example, we'll go on scanning bus with vendor or header_type uninitialized. This brings many unnecessary config trials. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> 
This patch has been sent on:
- 6 Jun 2007

Many users of PCI config read routines tend to ignore the function
ret value, and are only concerned about the contents of *val. Based
on this, pci_hose_read_config_{byte,word}_via_dword should initialize
the *val on dword read error.

Without this fix, for example, we'll go on scanning bus with vendor or
header_type uninitialized. This brings many unnecessary config trials.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Start pci hose scan from hose->current_busno. 2007-07-11T21:43:11+00:00 Ed Swarthout Ed.Swarthout@freescale.com 2007-07-11T19:51:35+00:00 40e81addab7bb74d20ddf681ce9babc880a828ee Ensure hose->current_busno is not less than first_busno. This fixes broken board code which leaves current_busno=0 when first_busno is greater than 0 for the cases with multiple controllers. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> 
Ensure hose->current_busno is not less than first_busno.  This fixes
broken board code which leaves current_busno=0 when first_busno is
greater than 0 for the cases with multiple controllers.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Add support for wrPPMC7xx/74xx boards 2006-06-19T09:02:41+00:00 Heiko Schocher hs@pollux.denx.de 2006-06-19T09:02:41+00:00 f5e0d03970409feb3c77ab0107d5dece6b7d45c9 Patch from Richard Danter, 12 Aug 2005 
  Patch from Richard Danter, 12 Aug 2005
Report back PCI bus when doing table based device config 2006-01-11T19:27:19+00:00 Kumar Gala galak@kernel.crashing.org 2006-01-11T19:27:19+00:00 3411d1176102249f0e85dfc01820940e2faa7d13 Patch by Kumar Gala 11 Jan 2006 
Patch by Kumar Gala 11 Jan 2006
Add PCI support for the TQM834x board. 2005-10-17T00:39:53+00:00 Rafal Jaworowski raj@pollux.denx.de 2005-10-17T00:39:53+00:00 6902df56a0b493f369153b09d11afcd74a580561 






* Patch by Jon Loeliger, 02 Sep 2004:
2005-01-09T17:12:27+00:00

wdenk
wdenk

2005-01-09T17:12:27+00:00

a1191902cab72b9f7127365fac39a1e1d5c9abda

  Reset monitor size back to 256 so environment can be written
  to flash on MPC85xx ADS and CDS releases.

* Patch by Paolo Broggini, 02 Sep 2004:
  Make BSS clearing on ARM systems more robust

* Patch by Yue Hu and Joe, 01 Sep 2004:
  - add PCI support for ixp425;
  - add EEPRO100 suppor tfor ixdp425 board.

* Fix problem with protected sector detection in driver/cfi_flash.c





  Reset monitor size back to 256 so environment can be written
  to flash on MPC85xx ADS and CDS releases.

* Patch by Paolo Broggini, 02 Sep 2004:
  Make BSS clearing on ARM systems more robust

* Patch by Yue Hu and Joe, 01 Sep 2004:
  - add PCI support for ixp425;
  - add EEPRO100 suppor tfor ixdp425 board.

* Fix problem with protected sector detection in driver/cfi_flash.c







added CONFIG_PCI_CONFIG_HOST_BRIDGE to enable host bridge configuration
2004-12-16T17:48:41+00:00

stroese
stroese

2004-12-16T17:48:41+00:00

6bb992ba9d612370c076ab80ba29ac12f97da125












* Patch by Matthew S. McClintock, 14 Apr 2004:
2004-04-18T22:26:17+00:00

wdenk
wdenk

2004-04-18T22:26:17+00:00

498b8db7f5ba6c4793cc2d235c7274408d0a63db

  fix initdram function for utx8245 board

* Patch by Markus Pietrek, 14 Apr 2004:
  use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag

* Patch by Reinhard Meyer, 18 Apr 2004:
  provide the IDE Reset Function for EMK 5200 boards

* Patch by Masami Komiya, 12 Apr 2004:
  fix pci_hose_write_config_{byte,word}_via_dword problems





  fix initdram function for utx8245 board

* Patch by Markus Pietrek, 14 Apr 2004:
  use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag

* Patch by Reinhard Meyer, 18 Apr 2004:
  provide the IDE Reset Function for EMK 5200 boards

* Patch by Masami Komiya, 12 Apr 2004:
  fix pci_hose_write_config_{byte,word}_via_dword problems







Code cleanup; make several boards compile & link.
2004-03-14T22:25:36+00:00

wdenk
wdenk

2004-03-14T22:25:36+00:00

42dfe7a1844cbad7114038aaf03828acb7a84414