u-boot.git/drivers/pci/Makefile, branch v2018.01

PCI: Add driver for a 'pci-host-ecam-generic' host controller

2017-10-06T15:28:12Z

QEMU emulates such a device with '-machine virt,highmem=off' on ARM. The 'highmem=off' part is required for things to work as the PCI code in U-Boot doesn't seem to support 64-bit BARs. Signed-off-by: Tuomas Tynkkynen Reviewed-by: Bin Meng

Drop CONFIG_WINBOND_83C553

2017-01-25T22:38:43Z

This is not used in U-Boot. Drop this option and associated dead code. Signed-off-by: Simon Glass

pci: layerscape: move kernel DT fixup to a separate file

2017-01-18T17:26:24Z

To make the layerscape pcie driver clear, move the kernel DT fixup code from pcie_layerscape.c to pcie_layerscape_fixup.c. Signed-off-by: Hou Zhiqiang Reviewed-by: Simon Glass Reviewed-by: York Sun

pci: mvebu: Add PCIe driver for Armada-8K

2016-12-05T12:34:33Z

This patch adds a driver for the PCIe controller integrated in the Marvell Armada-8K SoC. This controller is based on the DesignWare IP core. The original version was written by Shadi and Yehuda. I ported this driver to the latest mainline U-Boot version with DM support. Tested on the Marvell DB-88F8040 Armada-8K eval board. Signed-off-by: Shadi Ammouri Signed-off-by: Yehuda Yitschak Signed-off-by: Stefan Roese Reviewed-by: Simon Glass Cc: Nadav Haklai Cc: Neta Zur Hershkovits Cc: Kostya Porotchkin Cc: Omri Itach Cc: Igal Liberman Cc: Haim Boot Cc: Hanna Hawa

pci: xilinx: Add a driver for Xilinx AXI to PCIe bridge

2016-09-21T13:04:32Z

This patch adds a driver for the Xilinx AXI bridge for PCI express, an IP block which can be used on some generations of Xilinx FPGAs. This is mostly a case of implementing PCIe ECAM specification, but with some quirks about what devices are valid to access. Signed-off-by: Paul Burton Reviewed-by: Simon Glass

dm: pci: video: Convert video and pci_rom to use DM PCI API

2016-01-12T17:19:09Z

Adjust these files to use the driver-model PCI API instead of the legacy functions. Signed-off-by: Simon Glass Acked-by: Anatolij Gustschin Reviewed-by: Bin Meng Tested-by: Bin Meng

dm: pci: Use driver model PCI API in auto-config

2016-01-12T17:19:09Z

At present we are using legacy functions even in the auto-configuration code used by driver model. Add a new pci_auto.c version which uses the correct API. Create a new pci_internal.h header to hold functions that are used within the PCI subsystem, but are not exported to other drivers. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Tested-by: Bin Meng

dm: pci: Disable PCI compatibility functions by default

2015-12-01T13:26:38Z

We eventually need to drop the compatibility functions for driver model. As a first step, create a configuration option to enable them and hide them when the option is disabled. Signed-off-by: Simon Glass Reviewed-by: Bin Meng

dm: pci: Move common auto-config functions to a common file

2015-12-01T13:26:37Z

Some functions will be used by driver model and legacy PCI code. To avoid duplication, put these in a separate, shared file. Signed-off-by: Simon Glass Reviewed-by: Bin Meng

dm: pci: Rename pci_auto.c to pci_auto_old.c

2015-12-01T13:26:37Z

This file should not be used with driver model as it has lots of legacy/ compatibility functions. Rename it to make this clear. Signed-off-by: Simon Glass Reviewed-by: Bin Meng