commit 70ed869e broke fsl pcie end-point initialization.
Returning 0 is not correct.  The function must return the first free
bus number for the next controller.

fsl_pci_init() must still be called and a bus allocated even if the
controller is an end-point.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Acked-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

This reverts commit 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc.

There isn't any need to modify the API for fsl_pci_init_port to pass the
status of host/agent(end-point) status.  We can determine that
internally to fsl_pci_init_port.  Revert the patch that makes the API
change.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Originally written by Jason Jin and Mingkai Hu for mpc8536.

When QorIQ based board is configured as a PCIe agent, then unlock/enable
inbound PCI configuration cycles and init a 4K inbound memory window;
so that a PCIe host can access the PCIe agents SDRAM at address 0x0

* Supported in fsl_pci_init_port() after adding pcie_ep as a param
* Revamped copyright in drivers/pci/fsl_pci_init.c
* Mods in 85xx based board specific pci init after this change

Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

General code cleanup to use in/out IO accessors as well as making
the code that prints out info sane between board and generic fsl pci
code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

fsl_pci_init_port can be called from board specific PCI initialization
routines to setup the PCI (or PCIe) controller.  This will reduce code
redundancy in most of the 85xx/86xx FSL board ports that setup PCI.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

The old PCI ATMU setup code would just mimic the PCI regions into the
ATMU registers.  For simple memory maps in which all memory, MMIO, etc
space fit into 4G this works ok.  However there are issues with we have
>4G of memory as we know can't access all of memory and we need to
ensure that PCICSRBAR (PEXCSRBAR on PCIe) isn't overlapping with
anything since we can't turn it off.

We first setup outbound windows based on what the board code setup
in the pci regions for MMIO and IO access.  Next we place PCICSRBAR
below the MMIO window.  After which we try to setup the inbound windows
to map as much of memory as possible.

On PCIe based controllers we are able to overmap the ATMU setup since
RX & TX links are separate but report the proper amount of inbound
address space to the region tracking to ensure there is no overlap.

On PCI based controllers we use as many inbound windows as available to
map as much of the memory as possible.

Additionally we changed all the CCSR register access to use proper IO
accessor functions.  Also had to add CONFIG_SYS_CCSRBAR_PHYS to some
86xx platforms that didn't have it defined.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Change the code to use the PCIe capabilities register to determine if we
are a PCIe controller or not.  Additionally cleaned up some white space
and formatting in the file.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Every platform that calls fsl_pci_init calls fsl_pci_setup_inbound_windows
before it calls fsl_pci_init.  There isn't any reason to just call it
from fsl_pci_init and simplify things a bit.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Every platform that calls fsl_pci_init calls pci_setup_indirect before
it calls fsl_pci_init.  There isn't any reason to just call it from
fsl_pci_init and simplify things a bit.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

This patch adds support for the esd VME8349 board equipped with the
MPC8349. It's a VME PMC carrier board equipped with the Tundra
TSI148 VME-bridge.

Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>