<feed xmlns='http://www.w3.org/2005/Atom'>
<title>u-boot.git/drivers/pci, branch v2018.07</title>
<subtitle>Unnamed repository; edit this file 'description' to name the repository.
</subtitle>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/'/>
<entry>
<title>dm: pci: Use a 1:1 mapping for bus &lt;-&gt; phy addresses</title>
<updated>2018-06-13T01:50:57+00:00</updated>
<author>
<name>Christian Gmeiner</name>
<email>christian.gmeiner@gmail.com</email>
</author>
<published>2018-06-10T13:25:06+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=6f95d89c71b9735a114754fc85284cca01db1006'/>
<id>6f95d89c71b9735a114754fc85284cca01db1006</id>
<content type='text'>
If U-Boot gets used as coreboot payload all pci resources got
assigned by coreboot. If a dts without any pci ranges gets used
the dm is not able to access pci device memory. To get things
working make use of a 1:1 mapping for bus &lt;-&gt; phy addresses.

This change makes it possible to get the e1000 U-Boot driver
working on a sandybridge device where U-Boot is used as coreboot
payload.

Signed-off-by: Christian Gmeiner &lt;christian.gmeiner@gmail.com&gt;
Reviewed-by: Bin Meng &lt;bmeng.cn@gmail.com&gt;
[bmeng: fixed 'u-boot' in the commit message]
Signed-off-by: Bin Meng &lt;bmeng.cn@gmail.com&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If U-Boot gets used as coreboot payload all pci resources got
assigned by coreboot. If a dts without any pci ranges gets used
the dm is not able to access pci device memory. To get things
working make use of a 1:1 mapping for bus &lt;-&gt; phy addresses.

This change makes it possible to get the e1000 U-Boot driver
working on a sandybridge device where U-Boot is used as coreboot
payload.

Signed-off-by: Christian Gmeiner &lt;christian.gmeiner@gmail.com&gt;
Reviewed-by: Bin Meng &lt;bmeng.cn@gmail.com&gt;
[bmeng: fixed 'u-boot' in the commit message]
Signed-off-by: Bin Meng &lt;bmeng.cn@gmail.com&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dm: pci: Make ranges dt property optional</title>
<updated>2018-06-13T01:50:57+00:00</updated>
<author>
<name>Christian Gmeiner</name>
<email>christian.gmeiner@gmail.com</email>
</author>
<published>2018-06-10T13:25:05+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=f2825f6ec0bb50e7bd9376828a32212f1961f979'/>
<id>f2825f6ec0bb50e7bd9376828a32212f1961f979</id>
<content type='text'>
If we use U-Boot as coreboot payload with a generic dts without
any ranges specified we fail in pci pre_probe and our pci bus
is not usable.

So convert decode_regions(..) into a void function and do the simple
error handling there.

Signed-off-by: Christian Gmeiner &lt;christian.gmeiner@gmail.com&gt;
Reviewed-by: Bin Meng &lt;bmeng.cn@gmail.com&gt;
[bmeng: fixed 'u-boot' in the commit message and checkpatch warning]
Signed-off-by: Bin Meng &lt;bmeng.cn@gmail.com&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If we use U-Boot as coreboot payload with a generic dts without
any ranges specified we fail in pci pre_probe and our pci bus
is not usable.

So convert decode_regions(..) into a void function and do the simple
error handling there.

Signed-off-by: Christian Gmeiner &lt;christian.gmeiner@gmail.com&gt;
Reviewed-by: Bin Meng &lt;bmeng.cn@gmail.com&gt;
[bmeng: fixed 'u-boot' in the commit message and checkpatch warning]
Signed-off-by: Bin Meng &lt;bmeng.cn@gmail.com&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: autoconfig: Don't allocate 64-bit addresses to 32-bit only resources</title>
<updated>2018-05-26T16:46:50+00:00</updated>
<author>
<name>Tuomas Tynkkynen</name>
<email>tuomas.tynkkynen@iki.fi</email>
</author>
<published>2018-05-14T16:38:13+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=d71975ae6e0f3dc1c0c96d3a8cc0120a266305b9'/>
<id>d71975ae6e0f3dc1c0c96d3a8cc0120a266305b9</id>
<content type='text'>
Currently, if we happen to allocate an address requiring 64 bits to a
device only supporting 32-bit BARs, the address eventually gets silently
truncated to 32 bits. Avoid this by adding a new flag to
pciauto_region_allocate() to bail out in such situations.

Signed-off-by: Tuomas Tynkkynen &lt;tuomas.tynkkynen@iki.fi&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Currently, if we happen to allocate an address requiring 64 bits to a
device only supporting 32-bit BARs, the address eventually gets silently
truncated to 32 bits. Avoid this by adding a new flag to
pciauto_region_allocate() to bail out in such situations.

Signed-off-by: Tuomas Tynkkynen &lt;tuomas.tynkkynen@iki.fi&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: Add newlines to debug prints in pci_auto_common.c</title>
<updated>2018-05-26T16:46:50+00:00</updated>
<author>
<name>Tuomas Tynkkynen</name>
<email>tuomas.tynkkynen@iki.fi</email>
</author>
<published>2018-05-14T16:38:12+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=ed12a89d0738dd030c42a608efa7a72dd4a1f6da'/>
<id>ed12a89d0738dd030c42a608efa7a72dd4a1f6da</id>
<content type='text'>
All of the debug output from this file is squished to one line. Fix
it.

Signed-off-by: Tuomas Tynkkynen &lt;tuomas.tynkkynen@iki.fi&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
All of the debug output from this file is squished to one line. Fix
it.

Signed-off-by: Tuomas Tynkkynen &lt;tuomas.tynkkynen@iki.fi&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: dm: Ignore 64-bit memory regions if CONFIG_SYS_PCI_64BIT not set</title>
<updated>2018-05-26T16:46:50+00:00</updated>
<author>
<name>Tuomas Tynkkynen</name>
<email>tuomas.tynkkynen@iki.fi</email>
</author>
<published>2018-05-14T15:47:50+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=52ba907328ec069ff1cec6cbe659f1714c68ed33'/>
<id>52ba907328ec069ff1cec6cbe659f1714c68ed33</id>
<content type='text'>
Currently, qemu_arm_defconfig and qemu_arm64_defconfig only work with
the 'highmem=off' parameter passed to QEMU's virt machine. The reason is
that when 'highmem' is not disabled, QEMU appends 64-bit a memory
resource to the PCI controller's regions property in DT in addition to
the 32-bit PCI memory window in low memory. And the current DT parsing
code picks the last (thus the 64-bit one) memory resource, whose address
eventually gets silently truncated to 32 bits because
CONFIG_SYS_PCI_64BIT is not set, which obviously causes PCI to break.

Avoid this problem by ignoring memory regions whose addresses are above
the 32-bit boundary when CONFIG_SYS_PCI_64BIT is not set.

Signed-off-by: Tuomas Tynkkynen &lt;tuomas.tynkkynen@iki.fi&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Currently, qemu_arm_defconfig and qemu_arm64_defconfig only work with
the 'highmem=off' parameter passed to QEMU's virt machine. The reason is
that when 'highmem' is not disabled, QEMU appends 64-bit a memory
resource to the PCI controller's regions property in DT in addition to
the 32-bit PCI memory window in low memory. And the current DT parsing
code picks the last (thus the 64-bit one) memory resource, whose address
eventually gets silently truncated to 32 bits because
CONFIG_SYS_PCI_64BIT is not set, which obviously causes PCI to break.

Avoid this problem by ignoring memory regions whose addresses are above
the 32-bit boundary when CONFIG_SYS_PCI_64BIT is not set.

Signed-off-by: Tuomas Tynkkynen &lt;tuomas.tynkkynen@iki.fi&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>pci: tegra: introduce weak tegra_pcie_board_port_reset() function</title>
<updated>2018-05-10T23:34:21+00:00</updated>
<author>
<name>Marcel Ziswiler</name>
<email>marcel.ziswiler@toradex.com</email>
</author>
<published>2018-05-08T15:34:09+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=355560d5883ea0188ddb28dd2da9b54e629bd132'/>
<id>355560d5883ea0188ddb28dd2da9b54e629bd132</id>
<content type='text'>
Introduce a weak tegra_pcie_board_port_reset() function by default
calling the existing tegra_pcie_port_reset() function. Additionally add
a tegra_pcie_port_index_of_port() function to retrieve the specific PCIe
port index if required. This allows overriding the PCIe port reset
functionality from board specific code as e.g. required for Apalis T30
and Apalis TK1.

Signed-off-by: Marcel Ziswiler &lt;marcel.ziswiler@toradex.com&gt;
Acked-by: Stephen Warren &lt;swarren@nvidia.com&gt;
Signed-off-by: Tom Warren &lt;twarren@nvidia.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Introduce a weak tegra_pcie_board_port_reset() function by default
calling the existing tegra_pcie_port_reset() function. Additionally add
a tegra_pcie_port_index_of_port() function to retrieve the specific PCIe
port index if required. This allows overriding the PCIe port reset
functionality from board specific code as e.g. required for Apalis T30
and Apalis TK1.

Signed-off-by: Marcel Ziswiler &lt;marcel.ziswiler@toradex.com&gt;
Acked-by: Stephen Warren &lt;swarren@nvidia.com&gt;
Signed-off-by: Tom Warren &lt;twarren@nvidia.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>pci: Don't use pci_indirect when DM is active</title>
<updated>2018-05-08T22:50:23+00:00</updated>
<author>
<name>Mario Six</name>
<email>mario.six@gdsys.cc</email>
</author>
<published>2018-04-27T12:53:37+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=e097ce4304056452704f54245e28a6badb59fe06'/>
<id>e097ce4304056452704f54245e28a6badb59fe06</id>
<content type='text'>
Declaration of indirect PCI bridges is not compatible with DM: Both
define PCI operations, but in different ways. Hence, don't use indirect
bridges if DM is active.

Signed-off-by: Mario Six &lt;mario.six@gdsys.cc&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Declaration of indirect PCI bridges is not compatible with DM: Both
define PCI operations, but in different ways. Hence, don't use indirect
bridges if DM is active.

Signed-off-by: Mario Six &lt;mario.six@gdsys.cc&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>pci: intel: Add Intel FPGA PCIe controller driver</title>
<updated>2018-05-08T13:07:35+00:00</updated>
<author>
<name>Ley Foon Tan</name>
<email>ley.foon.tan@intel.com</email>
</author>
<published>2018-04-20T13:55:45+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=7c45862f22fd6275a48130197d315dcf8723cfb5'/>
<id>7c45862f22fd6275a48130197d315dcf8723cfb5</id>
<content type='text'>
Add PCIe driver for Intel FPGA PCIe IP. This driver operates the PCIe IP in
rootport mode only, the EP mode is not supported. The driver is tested
with the Intel e1000e NIC driver.

Signed-off-by: Ley Foon Tan &lt;ley.foon.tan@intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add PCIe driver for Intel FPGA PCIe IP. This driver operates the PCIe IP in
rootport mode only, the EP mode is not supported. The driver is tested
with the Intel e1000e NIC driver.

Signed-off-by: Ley Foon Tan &lt;ley.foon.tan@intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>SPDX: Convert all of our single license tags to Linux Kernel style</title>
<updated>2018-05-07T13:34:12+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2018-05-06T21:58:06+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=83d290c56fab2d38cd1ab4c4cc7099559c1d5046'/>
<id>83d290c56fab2d38cd1ab4c4cc7099559c1d5046</id>
<content type='text'>
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR</title>
<updated>2018-04-27T18:54:48+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2018-04-18T17:50:47+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=d024236e5a31a2b4b82cbcc98b31b8170fc88d28'/>
<id>d024236e5a31a2b4b82cbcc98b31b8170fc88d28</id>
<content type='text'>
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
