u-boot.git/drivers/pci_indirect.c, branch master Unnamed repository; edit this file 'description' to name the repository. drivers/pci : move pci drivers to drivers/pci 2007-11-24T19:35:55+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2007-11-20T19:28:09+00:00 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Support PCIe extended config registers 2007-07-11T21:43:21+00:00 Ed Swarthout Ed.Swarthout@freescale.com 2007-07-11T19:52:01+00:00 571f49fa717004ca4268b4e24057efc7bf9f987b FSL PCIe block has extended cfg registers in the 100 and 400 range. For example, to read the LTSSM register: pci display <busn>.0 404 1 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> 
FSL PCIe block has extended cfg registers in the 100 and 400 range.
For example, to read the LTSSM register: pci display <busn>.0 404 1

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Merge: Add support for AMCC 440SPe CPU based eval board (Yucca). 2006-06-30T16:19:42+00:00 Marian Balakowicz m8@semihalf.com 2006-06-30T16:19:42+00:00 f6e5739a68131998a5ae8aa0cf56a0316f810200 






Add support for AMCC 440SPe CPU based eval board (Yucca).
2006-06-30T14:30:46+00:00

Marian Balakowicz
m8@semihalf.com

2006-06-30T14:30:46+00:00

6c5879f380be38d85fef0d3aba3353358f4b2ff4












Fixed PCI indirect config ops to handle multiple PCI controllers
2006-01-12T21:30:24+00:00

Kumar Gala
galak@kernel.crashing.org

2006-01-12T21:30:24+00:00

dffb70f3305daa16625ec9d5b02a2c0d23ff84b3

We need to adjust the bus number we are trying to access based
on which PCI controller its on
Patch by Kumar Gala 12 Jan 2006





We need to adjust the bus number we are trying to access based
on which PCI controller its on
Patch by Kumar Gala 12 Jan 2006







Fix warnings for PCI code on ixp
2005-09-24T22:00:45+00:00

Wolfgang Denk
wd@pollux.(none)

2005-09-24T22:00:45+00:00

3706ba1a361deba22602d0a5322d1667e8b9a114

Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005





Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005







Changed CONFIG_440_xx to CONFIG_440xx for a consistent design (405 and linux)
2005-08-08T10:42:22+00:00

Stefan Roese
sr@denx.de

2005-08-08T10:42:22+00:00

846b0dd2dca945c8bede8a34e2fa86e876715a06

Patch by Stefan Roese, 08 Aug 2005





Patch by Stefan Roese, 08 Aug 2005







Add support for AMCC PPC440EP/GR eval boards Yosemite and Yellowstone.
2005-08-01T14:41:48+00:00

Stefan Roese
sr@denx.de

2005-08-01T14:41:48+00:00

c157d8e219694f5c3dea1ed3826668bdc67ca093

Patch by Steven Blakeslee, 27 Jul 2005





Patch by Steven Blakeslee, 27 Jul 2005







* Some Cleanup.
2005-01-12T00:15:14+00:00

wdenk
wdenk

2005-01-12T00:15:14+00:00

289f932c5ff628bf21a05073243071a01a2d3b02

* Patch by Richard Woodruff, 10 Jan 2005:
  Update support for OMAP2420 (ARM11) and H4 board:
  o clean up and add new types to H4 memory probe code.
  o fix to work with internal boot.
  o added PRCM config III operation.
  o fix marginal flash timings.
  o add revison ATAG usage.
  o enable voltage scaling at power chip.
  o fix compile error for i2c.

* Fix network problem (error when receiving multiple ARP packets)





* Patch by Richard Woodruff, 10 Jan 2005:
  Update support for OMAP2420 (ARM11) and H4 board:
  o clean up and add new types to H4 memory probe code.
  o fix to work with internal boot.
  o added PRCM config III operation.
  o fix marginal flash timings.
  o add revison ATAG usage.
  o enable voltage scaling at power chip.
  o fix compile error for i2c.

* Fix network problem (error when receiving multiple ARP packets)







* Patch by Travis Sawyer, 09 Feb 2004:
2004-02-22T23:46:08+00:00

wdenk
wdenk

2004-02-22T23:46:08+00:00

3c74e32a98187c792edcea3e0e39150de5a8dda6

  o 440GX:
    - Fix PCI Indirect access for type 1 config cycles with ppc440.
    - Add phymode for 440 enet
    - fix pci pre init
  o XPedite1K:
    - Change board_pre_init to board_early_init_f
    - Add user flash to bus controller setup
    - Fix pci pre init
    - Fix is_pci_host to check GPIO for monarch bit
    - Force xpedite1k to pci conventional mode (via #define option)

* Patch by Brad Kemp, 4 Feb 2004:
  - handle the machine check that is generated during the PCI scans
    on 82xx processors.
  - define the registers used in the IMMR by the PCI subsystem.

* Patch by Pierre Aubert, 03 Feb 2004:
  cpu/mpc5xxx/start.S: copy MBAR into SPR311

* Patch by Jeff Angielski, 03 Feb 2004:
  Fix copy & paste error in cpu/mpc8260/pci.c

* Patch by Reinhard Meyer, 24 Jan 2004:
  Fix typo in cpu/mpc5xxx/pci_mpc5200.c





  o 440GX:
    - Fix PCI Indirect access for type 1 config cycles with ppc440.
    - Add phymode for 440 enet
    - fix pci pre init
  o XPedite1K:
    - Change board_pre_init to board_early_init_f
    - Add user flash to bus controller setup
    - Fix pci pre init
    - Fix is_pci_host to check GPIO for monarch bit
    - Force xpedite1k to pci conventional mode (via #define option)

* Patch by Brad Kemp, 4 Feb 2004:
  - handle the machine check that is generated during the PCI scans
    on 82xx processors.
  - define the registers used in the IMMR by the PCI subsystem.

* Patch by Pierre Aubert, 03 Feb 2004:
  cpu/mpc5xxx/start.S: copy MBAR into SPR311

* Patch by Jeff Angielski, 03 Feb 2004:
  Fix copy & paste error in cpu/mpc8260/pci.c

* Patch by Reinhard Meyer, 24 Jan 2004:
  Fix typo in cpu/mpc5xxx/pci_mpc5200.c