u-boot.git/drivers/phy/Kconfig, branch v2019.04Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/drivers/phy/Kconfig?h=v2019.042019-04-03T14:23:38Zphy: Also allow MESON_GXM for MESON_GXL_USB_PHY2019-04-03T14:23:38ZNeil Armstrongnarmstrong@baylibre.com2019-04-03T11:46:36Zurn:sha1:82548aaad57b4060e57dfecc7752253eb3534474
The MESON_GXL_USB_PHY is also used on the Amlogic Meson GXM SoCs.
Fixes: 2960e27e38 ("phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
PHY: Add phy driver for the keystone USB PHY2018-12-14T16:59:09ZJean-Jacques Hiblotjjhiblot@ti.com2018-12-04T10:12:59Zurn:sha1:4b12783c8e011859e70ba5811654a21ee1a22237
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
phy: Add a new driver for OMAP's USB2 PHYs2018-12-07T15:31:46ZJean-Jacques Hiblotjjhiblot@ti.com2018-11-29T09:57:39Zurn:sha1:668257e0238fd78e9a0841fade8e1db447037053
This drivers supports the USB2 PHY found on omap5 and dra7 SOCs.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
phy: rcar: Add R-Car Gen3 PHY driver2018-10-03T10:56:13ZMarek Vasutmarek.vasut+renesas@gmail.com2018-10-02T20:31:47Zurn:sha1:6cfc3d664ed688e1a10834766776ffb450f09ce4
Add a PHY driver for the R-Car Gen3 which allows configuring
USB OTG PHY on Gen3 into host mode and toggles VBUS in case a
dedicated regulator is present.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
phy: db410c: Add MSM USB PHY driver2018-09-30T17:00:36ZRamon Friedramon.fried@gmail.com2018-09-21T10:35:47Zurn:sha1:92454e47bcec875490f3238d674fdc3e6c012b70
Add a PHY driver for the Qualcomm dragonboard 410c which
allows switching on/off and resetting the phy connected
to the EHCI controllers and USBHS controller.
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
phy: rcar: Add R-Car Gen2 PHY driver2018-08-14T09:31:19ZMarek Vasutmarek.vasut+renesas@gmail.com2018-08-05T13:22:19Zurn:sha1:664258887ded6cb3a3e4414dd1d4ea34abc0a7d7
Add a PHY driver for the R-Car Gen2 which allows configuring the mux
connected to the EHCI controllers and USBHS controller.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
phy: add support for STM32 usb phy controller2018-05-18T11:17:31ZPatrice Chotardpatrice.chotard@st.com2018-04-27T09:01:55Zurn:sha1:3b29121678241078ce08120e18108898ff3b7abd
This patch adds phy tranceiver driver for STM32 USB PHY
Controller (usbphyc) that provides dual port High-Speed
phy for OTG (single port) and EHCI/OHCI host controller
(two ports).
One port of the phy is shared between the two USB controllers
through a UTMI+ switch.
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers2018-04-11T15:22:07ZNeil Armstrongnarmstrong@baylibre.com2018-04-11T15:08:02Zurn:sha1:2960e27e3834ef2e6d506b21a582bd97ac18bbb0
The Amlogic Meson GXL and GXM (simple variant) embeds up to 3 USB2 PHYs
and an USB3 PHY. This patch adds drivers for these for the standard generic
PHY interface and supports the power-on/off calls and set the Host mode by
default.
They are based on the excellent work from Martin Blumenstingl merged in linux.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
phy: add support for bcm6318 usbh phy2018-03-21T22:23:13ZÁlvaro Fernández Rojasnoltari@gmail.com2018-02-04T20:11:15Zurn:sha1:8e948c6ff1f3765fda846260a6abd65361902a3d
Signed-off-by: Ãlvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
phy: add support for bcm6368 usbh phy2018-03-21T22:23:13ZÁlvaro Fernández Rojasnoltari@gmail.com2018-02-04T20:10:13Zurn:sha1:f55c1538bf163055a2891d1f0c2ac7fff8bb9b02
Signed-off-by: Ãlvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>