u-boot.git/drivers/phy/marvell/comphy_core.c, branch v2021.07

phy: marvell: add support for SFI1

2021-04-29T05:45:24Z

In CP115, comphy4 can be configured into SFI port1 (in addition to SFI0). This patch adds the option described above. In addition, rename all existing SFI/XFI references: COMPHY_TYPE_SFI --> COMPHY_TYPE_SFI0 No functional change for exsiting configuration. Change-Id: If9176222e0080424ba67347fe4d320215b1ba0c0 Signed-off-by: Igal Liberman Signed-off-by: Konstantin Porotchkin

phy: marvell: cp110: remove unused definitions

2021-04-29T05:45:24Z

Even if comphy types of SATA2/SATA3/SGMII3 and comphy speeds of 1.5G/3G/6.25G were referenced in the driver non configuration (dts) was using it. This patch removes unused definitions. Change-Id: I53ed6f9d3a82b9d18cb4e488bc14d3cf687f9488 Signed-off-by: Grzegorz Jaszczyk Signed-off-by: Konstantin Porotchkin

phy: marvell: enable comphy info prints for all devices

2021-04-29T05:45:24Z

Change-Id: I3b97253e7102a0868440a9e0200acc1c7919c743 Signed-off-by: Igal Liberman

phy: marvell: add RX training command

2021-04-29T05:45:24Z

This patch adds support for running RX training using new command called "rx_training" Usage: rx_training - rx_training RX training allows to improve link quality (for SFI mode) by running training sequence between us and the link partner, this allows to reach better link quality then using static configuration. Change-Id: I818fe67ccaf19a87af50d4c34a9db7d6802049a5 Signed-off-by: Igal Liberman Signed-off-by: Marcin Wojtas

phy: marvell: save comphy_map_data priv structure

2021-04-29T05:45:24Z

This allows the lower level driver access to comphy map data (required for RX training support, which is introduced in the following patches). Change-Id: Ib7ffdc4b32076c01c3a5d33f59552c9dfc6b12fa Signed-off-by: Igal Liberman

phy: marvell: fix several minor bugs in comphy_probe

2021-04-29T05:45:24Z

If fdtdec_get_int can't find speed, set COMPHY_SPEED_INVALID If fdtdec_get_int can't find type, set COMPHY_TYPE_INVALID Move the error print if phy-type is invalid Add continue to the probe loop (in a case of invalid phy) Cosmetic changes Change-Id: I0c61b40bfe685437426fe907942ed338b7845378 Signed-off-by: Igal Liberman

phy: marvell: add missing speed during info prints

2021-04-29T05:45:24Z

In get_speed_string() we have an array (speed_strings[]) which includes all possible speed strings. This array size and content must be aligned to the speed defines in comphy_data.h. This patch adds missing 5.125G speed, aligns speed_strings[] and fixes incorrect printing when speed > 5.0G. Change-Id: I9900d23595094be321be0c62fcaa88036324568e Signed-off-by: Igal Liberman

phy: marvell: rename comphy related definitions to COMPHY_XX

2021-04-29T05:45:24Z

Currently, all comphy definitions are PHY_TYPE_XX and PHY_SPEEED_XX. Those definition might be confused with MDIO PHY definitions. This patch does the following changes: - PHY_TYPE_XX --> COMPHY_TYPE_XX - PHY_SPEED_XX --> COMPHY_SPEED_XX This improves readability, no functional change. Change-Id: I2bd1d9289ebbc5c16fa80f9870f797ea1bcaf5fa Signed-off-by: Igal Liberman Signed-off-by: Konstantin Porotchkin

phy: marvell: add comphy type PHY_TYPE_USB3

2021-04-29T05:45:23Z

- For some Marvell SoCs, like armada-3700, there are both USB host and device controller, but on PHY level the configuration is the same. - The new type supports both USB device and USB host - This patch is cherry-picked from u-boot-2015 as-is. Change-Id: I01262027edd8ec23391cff6fb409b3009aedfbb9 Signed-off-by: jinghua Signed-off-by: Ken Ma Reviewed-by: Igal Liberman

common: Drop asm/global_data.h from common header

2021-02-02T20:33:42Z

Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include at all, so remove that include. Signed-off-by: Simon Glass Signed-off-by: Tom Rini