u-boot.git/drivers/phy/marvell/utmi_phy.h, branch master

WS cleanup: remove trailing empty lines

2021-09-30T12:08:56+00:00

Signed-off-by: Wolfgang Denk

phy: marvell: utmi: update utmi config which fixes usb2.0 instability

2021-04-29T05:45:24+00:00

- Add additional step which enables the Impedance and PLL calibration.
- Enable old squelch detector instead of the new analog squelch detector
circuit and update host disconnect threshold value.
- Update LS TX driver strength coarse and fine adjustment values.

Change-Id: Ifa0a585bfb5ecab0bfa033eed6874ff98b16a7df
Signed-off-by: Grzegorz Jaszczyk

phy: marvell: fix pll initialization for second utmi port

2021-04-29T05:45:24+00:00

According to Design Reference Specification the PHY PLL and Calibration
register from PHY0 are shared for multi-port PHY. PLL control registers
inside other PHY channels are not used.

This commit reworks utmi device tree nodes in a way that common PHY PLL
registers are moved to main utmi node. Accordingly both child nodes
utmi-unit range is reduced and register offsets in utmi_phy.h are updated
to this change.

This fixes issues in scenarios when only utmi port1 was in use, which
resulted with lack of correct pll initialization.

Change-Id: Icc520dfa719f43a09493ab31f671efbe88872097
Signed-off-by: Grzegorz Jaszczyk

phy: marvell: cp110: utmi: update analog parameters according to latest ETP

2021-04-29T05:45:24+00:00

Add UTMI analog parameters initialization values according to
latest ETP.

Change-Id: I5bcca205a3995202a18ff126f371a81f69e205c8
Signed-off-by: Igal Liberman

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 7K/8K

2016-09-27T15:29:54+00:00

This version is based on the Marvell U-Boot version with this patch
applied as latest patch:

Git ID 7f408573: "fix: comphy: cp110: add comphy initialization for usb
device mode" from 2016-07-05.

Signed-off-by: Stefan Roese 
Cc: Nadav Haklai 
Cc: Neta Zur Hershkovits 
Cc: Kostya Porotchkin 
Cc: Omri Itach 
Cc: Igal Liberman 
Cc: Haim Boot 
Cc: Hanna Hawa