u-boot.git/drivers/phy/rockchip, branch v2025.04

phy: rockchip: naneng-combphy: Introduce PHY-IDs to fix RK3588 muxing

2024-08-09T10:35:22Z

Fix multiplex configuration for PCIe1L0 and PCIe1L1 in PCIESEL_CON for RK3588 to correctly select between Combo PHYs and PCIe3 PHY. Currently, the code incorrectly muxes both ports to Combo PHYs, interfering with PCIe3 PHY settings. Introduce PHY identifiers to identify the correct Combo PHY and set the necessary bits accordingly. This fix is adapted from the upstream Linux commit by Sebastian Reichel: d16d4002fea6 ("phy: rockchip: naneng-combphy: Fix mux on rk3588") Fixes: b37260bca1aa ("phy: rockchip: naneng-combphy: Use signal from comb PHY on RK3588") Reviewed-by: Kever Yang Signed-off-by: Sebastian Kropatsch

phy: rockchip: snps-pcie3: Fix clearing PHP_GRF_PCIESEL_CON bits

2024-07-17T06:48:18Z

The pcie1ln_sel bits for the RK3588 are getting set but not cleared due to an incorrect write mask. Use a newly introduced constant for the write mask to fix this. Also introduce a GENMASK-based constant for PCIE30_PHY_MODE. This fix is adapted from the upstream Linux commit by Sebastian Reichel: 55491a5fa163 ("phy: rockchip-snps-pcie3: fix clearing PHP_GRF_PCIESEL_CON bits") Fixes: 50e54e80679b ("phy: rockchip: snps-pcie3: Add support for RK3588") Signed-off-by: Sebastian Kropatsch Reviewed-by: Kever Yang

phy: rockchip: snps-pcie3: Fix bifurcation for RK3588

2024-07-17T06:48:18Z

Misconfigured `PHP_GRF_PCIESEL` values are causing bifurcation issues, for example on the FriendlyElec CM3588 NAS board which uses bifurcation on both PCIe PCIe ports (all four lanes) to enable four M.2 NVMe sockets. Without this fix, NVMe devices do not get recognized. Correct the `PHP_GRF_PCIESEL` register configuration and simplify the bifurcation logic, enabling proper PCIe bifurcation based on the data-lanes property. This fix is adapted from the upstream Linux commit by Michal Tomek: f8020dfb311d ("phy: rockchip-snps-pcie3: fix bifurcation on rk3588") Fixes: 50e54e80679b ("phy: rockchip: snps-pcie3: Add support for RK3588") Signed-off-by: Sebastian Kropatsch Reviewed-by: Kever Yang

phy: rockchip: snps-pcie3: Fix "rockchip" spelling

2024-07-17T06:48:18Z

Several identifiers use "rochchip" instead of "rockchip". Fix this by replacing every instance of "rochchip" with "rockchip". Signed-off-by: Sebastian Kropatsch Reviewed-by: Kever Yang

phy: rockchip: naneng-combphy: Fix "rockchip" spelling

2024-07-17T06:48:18Z

Replace "rochchip" by "rockchip" in two instances. Signed-off-by: Sebastian Kropatsch Reviewed-by: Kever Yang

phy: rockchip: inno-hdmi: Fix missing readl base addr

2024-07-17T06:48:18Z

inno_poll passes the reg offset that is used by readl_poll_sleep_timeout without any base addr. Fix it. Bug: inno_hdmi_phy phy@ff430000: Pre-PLL locking failed inno_hdmi_phy phy@ff430000: PHY: Failed to power on phy@ff430000: -110. failed to power on phy (ret=-110) inno_hdmi_phy phy@ff430000: Pre-PLL locking failed inno_hdmi_phy phy@ff430000: PHY: Failed to power on phy@ff430000: -110. failed to power on phy (ret=-110) Fixes: aa2271184603 ("phy: rockchip: Add Rockchip INNO HDMI PHY driver") Suggested-by: Jonas Karlman Signed-off-by: Jagan Teki Reviewed-by: Kever Yang

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03Z

As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36Z

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-13T15:15:51Z

Roger Quadros says: Sync AM62 device tree files with Linux v6.9 and add in the missing bits in -u-boot.dtsi to get CPSW Ethernet working. CI testing: https://github.com/u-boot/u-boot/pull/534

phy: Remove and add needed includes

2024-05-07T14:00:56Z

Remove from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini