u-boot.git/drivers/phy/ti, branch master Unnamed repository; edit this file 'description' to name the repository. phy: ti: Add config to enable J721E WIZ SERDES wrapper at SPL stage 2026-03-16T14:24:04+00:00 Hrushikesh Salunke h-salunke@ti.com 2026-02-16T10:28:31+00:00 35e1083fb930ba1fa3a3c5cd139bf8285043c191 Add SPL_PHY_J721E_WIZ configuration option to enable the WIZ SERDES wrapper driver in SPL stage. This is required for PCIe boot support where SERDES configuration must be done early in the boot sequence before loading the bootloader image over PCIe. Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> 
Add SPL_PHY_J721E_WIZ configuration option to enable the WIZ SERDES
wrapper driver in SPL stage. This is required for PCIe boot support
where SERDES configuration must be done early in the boot sequence
before loading the bootloader image over PCIe.

Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
phy: ti: j721e-wiz: Enable reference clock output in cmn_refclk_<p/m> 2026-02-04T16:40:28+00:00 George McCollister george.mccollister@konsulko.com 2026-01-30T15:38:02+00:00 d7817a20c9e59b6a534403e90417b6910bb4a7cc cmn_refclk_<p/m> lines in Torrent SERDES are used for an connecting external reference clock. cmn_refclk_<p/m> can also be configured to output the reference clock. In order to drive the refclk out from the SERDES (Cadence Torrent), PHY_EN_REFCLK should be set in SERDES_RST of WIZ. Model PHY_EN_REFCLK as a clock, so that platforms like AM642 EVM can enable it. Based on: https://lore.kernel.org/r/20210310120840.16447-6-kishon@ti.com Signed-off-by: George McCollister <george.mccollister@konsulko.com> Tested-by: Bryan Brattlof <bb@ti.com> 
cmn_refclk_<p/m> lines in Torrent SERDES are used for an connecting
external reference clock. cmn_refclk_<p/m> can also be configured to
output the reference clock. In order to drive the refclk out from the
SERDES (Cadence Torrent), PHY_EN_REFCLK should be set in SERDES_RST of
WIZ. Model PHY_EN_REFCLK as a clock, so that platforms like AM642 EVM
can enable it.

Based on: https://lore.kernel.org/r/20210310120840.16447-6-kishon@ti.com

Signed-off-by: George McCollister <george.mccollister@konsulko.com>
Tested-by: Bryan Brattlof <bb@ti.com>
phy: ti: phy-j721e-wiz: Allow reinitialization when SERDES is pre-configured 2025-10-24T19:47:50+00:00 Hrushikesh Salunke h-salunke@ti.com 2025-10-17T05:25:19+00:00 8506cf58ffa2029f168cc64089763084b408051d Move the SERDES configuration check after clock and reset initialization and change it from a hard failure to a skip of WIZ initialization. This allows the driver to probe successfully when the SERDES has been pre-configured by a previous boot stage (e.g., ROM or SPL). This approach aligns with how the Linux kernel handles pre-configured SERDES, where the driver gracefully skips reinitialization rather than failing to probe. Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com> 
Move the SERDES configuration check after clock and reset initialization
and change it from a hard failure to a skip of WIZ initialization. This
allows the driver to probe successfully when the SERDES has been
pre-configured by a previous boot stage (e.g., ROM or SPL).

This approach aligns with how the Linux kernel handles pre-configured
SERDES, where the driver gracefully skips reinitialization rather than
failing to probe.

Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
phy: ti: j721e-wiz: Set error code before goto 2025-08-15T20:17:30+00:00 Andrew Goodbody andrew.goodbody@linaro.org 2025-08-06T17:03:26+00:00 fc96c1de5b719561db15259009a9ef22e671ee3d In j721e_wiz_probe the test for too many lanes jumps to the error exit path without assigning an error code which could lead to calling code silently ignoring the failure. Set the error code. This issue was found by Smatch. Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org> 
In j721e_wiz_probe the test for too many lanes jumps to the error exit
path without assigning an error code which could lead to calling code
silently ignoring the failure. Set the error code.

This issue was found by Smatch.

Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Kbuild: Always use $(PHASE_) 2025-04-11T18:16:44+00:00 Tom Rini trini@konsulko.com 2025-04-01T22:55:23+00:00 302b41d5397e9f821d360a74335e8821d4513970 It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our Makefiles as part of the macros to determine when to do something in our Makefiles based on what phase of the build we are in. For consistency, bring this down to a single macro and use "$(PHASE_)" only. Signed-off-by: Tom Rini <trini@konsulko.com> 
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.

Signed-off-by: Tom Rini <trini@konsulko.com>
global: Rename SPL_ to XPL_ 2024-10-11T17:44:48+00:00 Simon Glass sjg@chromium.org 2024-09-30T01:49:53+00:00 c46760d5967d12b6f7d37402878d1607a98b2b84 Use XPL_ as the symbol to indicate an SPL build. This means that SPL_ is no-longer set. Signed-off-by: Simon Glass <sjg@chromium.org> 
Use XPL_ as the symbol to indicate an SPL build. This means that SPL_ is
no-longer set.

Signed-off-by: Simon Glass <sjg@chromium.org>
Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet" 2024-05-20T19:35:03+00:00 Tom Rini trini@konsulko.com 2024-05-20T19:35:03+00:00 03de305ec48b0bb28554372abb40ccd46dbe0bf9 As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" 2024-05-19T14:16:36+00:00 Tom Rini trini@konsulko.com 2024-05-19T02:20:43+00:00 d678a59d2d719da9e807495b4b021501f2836ca5 When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
phy: Remove <common.h> and add needed includes 2024-05-07T14:00:56+00:00 Tom Rini trini@konsulko.com 2024-05-02T01:31:07+00:00 5323767510b78bfa8c79300da3e512c93d965aa6 Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> 
Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
tree-wide: Replace http:// link with https:// link for ti.com 2023-11-10T16:01:50+00:00 Nishanth Menon nm@ti.com 2023-11-01T20:56:03+00:00 a94a4071d449e12c9fb5ac37d6362d22efcb27da Replace instances of http://www.ti.com with https://www.ti.com Signed-off-by: Nishanth Menon <nm@ti.com> 
Replace instances of http://www.ti.com with https://www.ti.com

Signed-off-by: Nishanth Menon <nm@ti.com>