u-boot.git/drivers/phy/ti, branch v2024.07Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/drivers/phy/ti?h=v2024.072024-05-19T14:16:36ZRevert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""2024-05-19T14:16:36ZTom Rinitrini@konsulko.com2024-05-19T02:20:43Zurn:sha1:d678a59d2d719da9e807495b4b021501f2836ca5
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
phy: Remove <common.h> and add needed includes2024-05-07T14:00:56ZTom Rinitrini@konsulko.com2024-05-02T01:31:07Zurn:sha1:5323767510b78bfa8c79300da3e512c93d965aa6
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
tree-wide: Replace http:// link with https:// link for ti.com2023-11-10T16:01:50ZNishanth Menonnm@ti.com2023-11-01T20:56:03Zurn:sha1:a94a4071d449e12c9fb5ac37d6362d22efcb27da
Replace instances of http://www.ti.com with https://www.ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J721E2023-08-15T21:46:39ZSiddharth Vadapallis-vadapalli@ti.com2023-08-02T08:17:28Zurn:sha1:cb6f4bbe3ff1119ce506a4c53f11641ca2a97fd6
Enable full rate divider configuration support for J721E_WIZ_16G for SGMII.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
phy: ti: phy-j721e-wiz: Add SGMII support in wiz driver for J72002023-08-15T21:46:39ZSiddharth Vadapallis-vadapalli@ti.com2023-08-02T08:17:27Zurn:sha1:0914616156852ec2b93f83be5b555d4674d6d4b3
Select the same mac divider for SGMII too as the one being used for
QSGMII.
Enable full rate divider configuration support for J721E_WIZ_10G for
SGMII.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
phy: ti: phy-j721e-wiz: Add j721s2-wiz-10g module support2023-06-01T16:40:16ZRavi Gunasekaranr-gunasekaran@ti.com2023-05-15T10:50:40Zurn:sha1:eab13ca620597afd4cf5cc25763f5bca90a5474d
Add support for j721s2-wiz-10g device to use clock-names interface
instead of explicitly defining clock nodes within device tree node.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
phy: ti: j721e-wiz: Add support to enable LN23 Type-C swap2023-03-29T17:30:29ZSinthu Rajasinthu.raja@ti.com2023-03-13T12:42:24Zurn:sha1:3d0f2e37c57b0d2f60e0b985d7006220d94bd9b0
The WIZ acts as a wrapper for SerDes and has Lanes 0 and 2 reserved
for USB for type-C lane swap if Lane 1 and Lane 3 are linked to the
USB PHY that is integrated into the SerDes IP. The WIZ control register
has to be configured to support this lane swap feature.
The support for swapping lanes 2 and 3 is missing and therefore
add support to configure the control register to swap between
lanes 2 and 3 if PHY type is USB.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
phy: ti: j721e-wiz: Manage TypeC lane swap if typec-dir-gpios not specified2023-03-29T17:30:29ZSinthu Rajasinthu.raja@ti.com2023-03-13T12:42:23Zurn:sha1:75b6cd97dd41b11c212fccf545e346c38248f8a2
It's possible that the Type-C plug orientation on the DIR line will be
implemented through hardware design. In that situation, there won't be
an external GPIO line available, but the driver still needs to address
this since the DT won't use the typec-dir-gpios property.
Add code to handle LN10 Type-C swap if typec-dir-gpios property is not
specified in DT.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
phy: ti: j721e-wiz: add j784s4-wiz-10g module support2022-10-18T13:48:22ZMatt Ranostaymranostay@ti.com2022-10-05T20:51:30Zurn:sha1:28ba10074bc9ede42bdc3f717d1c6b1f85a6790d
Add support for j784s4-wiz-10g device which has two core reference
clocks (e.g core_ref_clk, core_ref1_clk) which requires an additional
mux selection option.
Signed-off-by: Matt Ranostay <mranostay@ti.com>
phy: ti: j721e-wiz: use OF data for device specific data2022-07-25T13:38:47ZMatt Ranostaymranostay@ti.com2022-07-08T06:41:52Zurn:sha1:ea3e163f21b65420f0a8e17af519006e69904b43
Move device specific data into OF data structure so it
is easier to maintain and we can get rid of if statements.
Based on: https://lore.kernel.org/linux-phy/20220526064121.27625-1-rogerq@kernel.org/T/#u
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Matt Ranostay <mranostay@ti.com>