u-boot.git/drivers/phy, branch v2020.10

phy: marvell: a3700: add sata comphy on lane 2 with invert option

2020-09-04T12:02:00+00:00

- This patch moves sata phy powerup from dedicate phy to compphy
  and adds invert option for sata powerup routine.

Change-Id: I1b4e8753e2b2c14c6efa97bca2ffc7d2553d8a90
Signed-off-by: zachary 
Signed-off-by: Ken Ma 
Reviewed-on: http://vgitil04.il.marvell.com:8080/53601
Reviewed-by: Igal Liberman 
Tested-by: Igal Liberman 
[a.heider: adapt to mainline]
Signed-off-by: Andre Heider 
Tested-by: Pali Rohár 
Reviewed-by: Stefan Roese

phy: mtk-tphy: make shared reg optional for v1

2020-08-24T18:11:31+00:00

make the shared reg optional when version is v1 for sata

Suggested-by: Chunfeng Yun 
Signed-off-by: Frank Wunderlich 
Reviewed-by: Chunfeng Yun

sandbox: phy: add driver_data for bind test cmd

2020-08-22T13:58:39+00:00

Add driver data to existing compatible string "sandbox,phy".
Add an additional compatible string without driver_data

This will verify that bind command parses, finds and passes the
correct driver data to device_bind_with_driver_data() by using
driver_data in the second sandbox_phy_ids table entry.
In sandbox_phy_bind() a check is added to validate driver_data
content.

Signed-off-by: Patrice Chotard 
Reviewed-by: Simon Glass

phy: mtk-tphy: add PHY_TYPE_SATA

2020-08-19T21:38:15+00:00

add support for PHY_TYPE_SATA to Mediateks TPHY driver

Signed-off-by: Frank Wunderlich 
Reviewed-by: Chunfeng Yun

phy: usbphyc: use regulator_set_enable_if_allowed for disabling vdd supply

2020-07-28T16:00:05+00:00

Use regulator_set_enable_if_allowed() api instead of regulator_set_enable()
while disabling vdd supply. This way the driver doesn't see an error
when disabling an always-on regulator.

This patch is needed since the commit f93fab312615 ("Revert 'power:
regulator: Return success on attempt to disable an always-on regulator'")
and use the API introduced by commit cc4a224af226 ("power: regulator:
Introduce regulator_set_enable_if_allowed api").

Signed-off-by: Patrick Delaunay 
Reviewed-by: Patrice Chotard

phy: Add Rockchip PCIe PHY driver

2020-07-22T12:22:42+00:00

Add the Rockchip PCIe PHY driver as part of
Generic PHY framework.

Signed-off-by: Jagan Teki 
Reviewed-by: Kever Yang

phy: omap-usb2-phy: disable phy charger detect

2020-06-16T11:30:02+00:00

AM654x PG1.0 has a silicon bug that D+ is pulled high after POR, which
could cause enumeration failure with some USB hubs.  Disabling the
USB2_PHY Charger Detect function will put D+ into the normal state.

Using property "ti,dis-chg-det-quirk" in the DT usb2-phy node to
enable this workaround for AM654x PG1.0.

Signed-off-by: Bin Liu 
Signed-off-by: Vignesh Raghavendra 
Signed-off-by: Roger Quadros

Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi

2020-06-03T15:52:13+00:00

- H6 emac support
- USB PHY H6 logic alignment

phy: sun4i-usb: Align H6 initialization logic with the kernel

2020-06-01T17:07:51+00:00

H6 SOC needs additional initialization of PHY registers. Corresponding
changes can be found in the kernel patch [1].

Without this changes there is no enumeration of 'musb' gadget.

[1] - https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ae409cc7c3cdb9ac4a1dba3eae70efec3d6b6c79

Fixes: 35fa673e0e5f ("sunxi: phy: Add USB PHY support for Allwinner H6")
Signed-off-by: Roman Stratiienko 
Reviewed-by: Jagan Teki

phy: rockchip: Add Rockchip USB TypeC PHY driver

2020-05-29T10:13:19+00:00

Add USB TYPEC PHY driver for rockchip platform.

Referenced from Linux TypeC PHY driver, currently
supporting usb3-port and dp-port need to add it
in the future.

Signed-off-by: Frank Wang 
Signed-off-by: Jagan Teki 
Reviewed-by: Kever Yang