u-boot.git/drivers/pinctrl/Kconfig, branch v2017.09

dm: Kconfig: fix typo in help for SPL_PINCTRL

2017-07-31T15:22:53Z

Changes 'controlloers' to 'controllers' in the help-text for SPL_PINCTRL. Signed-off-by: Philipp Tomsich

rockchip: rk322x: add pinctrl driver

2017-07-11T10:13:46Z

Add init pinctrl driver support for: - i2c; - spi; - uart; - pwm; - emmc/sdmmc; Signed-off-by: Kever Yang Reviewed-by: Philipp Tomsich

stm32: stm32f7: add spl build support

2017-06-09T15:23:55Z

This commit supports booting from stm32 internal nor flash. spl U-Boot initializes the sdram memory, copies next image (e.g. standard U-Boot) to sdram & then jumps to entry point. Here are the flash memory addresses for U-Boot-spl & standard U-Boot: - spl U-Boot : 0x0800_0000 - standard U-Boot : 0x0800_8000 To compile u-boot without spl: Remove SUPPORT_SPL configuration (arch/arm/mach-stm32/Kconfig) Signed-off-by: Vikas Manocha [trini: Rework Kconfig logic a bit] Signed-off-by: Tom Rini

rockchip: pinctrl: Add rv1108 pinctrl driver

2017-06-07T13:29:24Z

Add pinctrl support for Rockchip rv1108 soc Signed-off-by: Andy Yan Reviewed-by: Simon Glass

rockchip: rk3368: Add pinctrl driver

2017-06-07T13:29:19Z

Add driver to support iomux setup for the most commonly used peripherals on rk3368. Signed-off-by: Andy Yan Reviewed-by: Simon Glass

aspeed: AST2500 Pinctrl Driver

2017-05-08T15:57:33Z

This driver uses Generic Pinctrl framework and is compatible with the Linux driver for ast2500: it uses the same device tree configuration. Not all pins are supported by the driver at the moment, so it actually compatible with ast2400. In general, however, there are differences that in the future would be easier to maintain separately. Signed-off-by: Maxim Sloyko Reviewed-by: Simon Glass

pinctrl: Kconfig: sort pinctrl config options to prevent future clutter

2017-04-27T20:49:04Z

This originally started out as "pinctrl: Kconfig: reorder to keep Rockchip options together" and tried to keep the Rockchip-related config options together. However, we now rewrite all chip-specific driver selections to start with CONFIG_PINCTRL_ (with the inadvertent changes to related Makefiles) and sort those alphabetically. And as this already means touching most of the file, we also reformat the help text to not exceed 80 characters (but make full use of those 80 characters). Signed-off-by: Philipp Tomsich Acked-by: Simon Glass

pinctrl: at91: add pinctrl driver

2017-04-13T20:44:50Z

AT91 PIO controller is a combined gpio-controller, pin-mux and pin-config module. The peripheral's pins are assigned through per-pin based muxing logic. Each SoC will have to describe the its limitation and pin configuration via device tree. This will allow to do not need to touch the C code when adding new SoC if the IP version is supported. Signed-off-by: Wenyou Yang Reviewed-by: Simon Glass

rockchip: pinctrl: use per-SoC option names for Kconfig

2017-04-05T02:01:57Z

The config options for pinctrl on the RK3188, RK3288, RK3328 and RK3399 previously showed up in menuconfig with the generic string descriptor "Rockchip pin control driver" requiring one to look through the help/full description to identify which chip each menu entry was for. This change renames each option with the chip-name in the description string to make it easy to identify the configuration options in menuconfig. Signed-off-by: Philipp Tomsich Reviewed-by: Heiko Stuebner Reviewed-by: Simon Glass

Add single register pin controller driver

2017-03-26T19:23:42Z

This patch adds a pin controller driver supporting devices using a single configuration register per pin. Signed-off-by: Felix Brack