u-boot.git/drivers/pinctrl/Makefile, branch v2017.09

pinctrl: mvebu: Enable support for the Armada 37xx pinctrl driver

2017-05-31T05:33:50+00:00

To enable support for the Armada 37xx pinctrl driver, we need to
change the Kconfig symbol for the Armada 7k/8k pinctrl driver and its
dependencies to distinguish between both platforms and drivers.

Signed-off-by: Stefan Roese 
Cc: Konstantin Porotchkin 
Cc: Nadav Haklai

aspeed: AST2500 Pinctrl Driver

2017-05-08T15:57:33+00:00

This driver uses Generic Pinctrl framework and is compatible with
the Linux driver for ast2500: it uses the same device tree
configuration.

Not all pins are supported by the driver at the moment, so it actually
compatible with ast2400. In general, however, there are differences that
in the future would be easier to maintain separately.

Signed-off-by: Maxim Sloyko 
Reviewed-by: Simon Glass

pinctrl: Kconfig: sort pinctrl config options to prevent future clutter

2017-04-27T20:49:04+00:00

This originally started out as
     "pinctrl: Kconfig: reorder to keep Rockchip options together"
and tried to keep the Rockchip-related config options together.

However, we now rewrite all chip-specific driver selections to start
with CONFIG_PINCTRL_ (with the inadvertent changes to related
Makefiles) and sort those alphabetically. And as this already means
touching most of the file, we also reformat the help text to not exceed
80 characters (but make full use of those 80 characters).

Signed-off-by: Philipp Tomsich 
Acked-by: Simon Glass

pinctrl: at91: add pinctrl driver

2017-04-13T20:44:50+00:00

AT91 PIO controller is a combined gpio-controller, pin-mux and
pin-config module. The peripheral's pins are assigned through
per-pin based muxing logic.

Each SoC will have to describe the its limitation and pin
configuration via device tree. This will allow to do not need
to touch the C code when adding new SoC if the IP version is
supported.

Signed-off-by: Wenyou Yang 
Reviewed-by: Simon Glass

Add single register pin controller driver

2017-03-26T19:23:42+00:00

This patch adds a pin controller driver supporting devices
using a single configuration register per pin.
Signed-off-by: Felix Brack

PINCTRL: stm32f7: add pin control driver

2017-03-17T18:15:14+00:00

This driver uses the same pin control binding as that of linux, binding
document of this patch is copied from linux. One addition done is for
GPIO input and output mode configuration which was missing.

Signed-off-by: Vikas Manocha 
Reviewed-by: Simon Glass

STiH410: Add STi pinctrl driver

2017-03-15T00:40:20+00:00

Add STMicroelectronics STiH410 pinctrl driver

Signed-off-by: Patrice Chotard 
Reviewed-by: Tom Rini 
Reviewed-by: Simon Glass

arm64: mvebu: pinctrl: Add pin control driver for A8K family

2016-12-12T08:04:52+00:00

Add a DM port of Marvell pin control driver.
The A8K SoC family contains several silicone dies interconnected
in a single package. Every die is normally equipped with its own
pin controller unit.
There are 2 pin controllers in A70x0 SoC and 3 in A80x0 SoC.

Signed-off-by: Konstantin Porotchkin 
Reviewed-by: Simon Glass 
Cc: Simon Glass 
Cc: Stefan Roese 
Cc: Nadav Haklai 
Cc: Neta Zur Hershkovits 
Cc: Omri Itach 
Cc: Igal Liberman 
Cc: Haim Boot 
Cc: Hanna Hawa 
Signed-off-by: Stefan Roese

pinctrl: add driver for meson-gxbb pin controller

2016-09-06T17:18:19+00:00

Add a pin controller driver for Meson GXBB adapted from Linux kernel.

Signed-off-by: Beniamino Galvani 
Reviewed-by: Simon Glass

pinctrl: at91-pio4: Add pinctrl driver

2016-08-15T20:58:03+00:00

AT91 PIO4 controller is a combined gpio-controller, pin-mux and
pin-config module. The peripheral's pins are assigned through
per-pin based muxing logic.

The pin configuration is performed on specific registers which
are shared along with the gpio controller. So regard the pinctrl
device as a child of atmel_pio4 device.

Signed-off-by: Wenyou Yang 
Reviewed-by: Simon Glass 
Reviewed-by: Andreas Bießmann