u-boot.git/drivers/pinctrl/nxp, branch v2017.09

pinctrl: imx7ulp: Add new info instance for iomuxc1

2017-08-23T08:48:15+00:00

To i.MX7ULP, we need to create two info instances for
iomux0 and iomux1 respectively, otherwise iomuxc0/1 will
share one info instance and use one base, because imx_pinctrl_probe
will use info to store base address and etc. But iomuxc0/1
actually have different base address.

Signed-off-by: Peng Fan 
Cc: Simon Glass 
Cc: Stefano Babic

pinctrl: imx: Fix mask when SHARE_MUX_CONF_REG is set

2017-08-23T08:47:00+00:00

when using SHARE_MUX_CONF_REG, wrong mask is used for
writing config value, which causes mux value is cleared.

Signed-off-by: Peng Fan 
Cc: Simon Glass 
Cc: Stefano Babic

dm: Fix up inclusion of common.h

2017-06-01T13:03:03+00:00

It is good practice to include common.h as the first header. This ensures
that required features like the DECLARE_GLOBAL_DATA_PTR macro,
configuration options and common types are available.

Fix up some files which currently don't do this. This is necessary because
driver model will soon start using global data and configuration in the
dm/read.h header file, included via dm.h. The gd->fdt_blob value will be
used to access the device tree and CONFIG options will be used to
determine whether to support inline functions in the header file.

Signed-off-by: Simon Glass

dm: Use dm.h header when driver mode is used

2017-06-01T12:57:52+00:00

This header includes things that are needed to make driver build. Adjust
existing users to include that always, even if other dm/ includes are
present

Signed-off-by: Simon Glass

pinctrl: imx: fix memory leak

2017-05-18T09:24:34+00:00

Each time set_state is called, a new piece memory will
be allocated for pin_data, but not freed, this will
incur memory leak.

When error, the devm API could not free memory automatically.
So need call devm_kfree when error.

Issue reported by Coverity

Signed-off-by: Peng Fan 
Cc: Simon Glass 
Cc: Stefan Agner 
Cc: Stefano Babic

pinctrl: Add i.MX7ULP pinctrl driver

2017-03-17T08:27:08+00:00

Add i.MX7ULP pinctrl driver.
Select CONFIG_PINCTRL_IMX7ULP to use this driver.

Signed-off-by: Peng Fan 
Reviewed-by: Simon Glass 
Reviewed-by : Stefano Babic

dm: core: Replace of_offset with accessor

2017-02-08T13:12:14+00:00

At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass

arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC

2016-12-16T11:57:12+00:00

Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.

The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc

Signed-off-by: Patrick Bruenn

pinctrl: imx6: support i.MX6SLL

2016-12-16T10:38:24+00:00

There two iomuxc for i.MX6SLL. One is normal IOMUXC, the other
is for IOMUXC_SNVS.

Signed-off-by: Peng Fan 
Cc: Stefano Babic 
Cc: Simon Glass 
Reviewed-by: Simon Glass

pinctrl: imx: do not announce driver initialization

2016-10-07T10:26:14+00:00

It is not usual that drivers announce when they have been initialized.
use dev_dbg to announce device initialization.

Signed-off-by: Stefan Agner 
Reviewed-by: Simon Glass