u-boot.git/drivers/pinctrl/pinctrl_stm32.c, branch master

pinctrl: pinctrl_stm32: prevent the use of the secure protected pins

2026-02-24T13:09:45+00:00

The hardware denies any access from the U-Boot non-secure world to the
secure-protected pins. Hence, prevent any driver to configure such a pin.
Identify the secure pins with "NO ACCESS" through the 'pinmux status -a'
command.
Use a driver data structure to identify which hardware versions support
this feature.

Signed-off-by: Fabien Dessenne 
Signed-off-by: Patrice Chotard 
Reviewed-by: Patrick Delaunay

drivers: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD

2024-10-11T17:44:48+00:00

Use the new symbol to refer to any 'SPL' build, including TPL and VPL

Signed-off-by: Simon Glass

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

pinctrl: Remove and add needed includes

2024-05-07T14:00:56+00:00

Remove  from this driver directory and when needed
add missing include files directly.

Reviewed-by: Peter Robinson 
Signed-off-by: Tom Rini

pinctrl: pinctrl_stm32: Add stm32mp2 support

2023-11-13T09:55:38+00:00

Add stm32mp2 compatible.

Signed-off-by: Patrice Chotard 
Reviewed-by: Patrick Delaunay

common: Drop linux/printk.h from common header

2023-09-24T13:54:57+00:00

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass

pinctrl: pinctrl_stm32: Add slew rate support for stm32_pinctrl_get_pin_muxing()

2023-04-19T07:50:32+00:00

For debug purpose, it should be useful to indicate the slew rate for
each pins.
Add ospeed register information for pins which are configured in
either alternate function or gpio output.

Signed-off-by: Patrice Chotard 
Reviewed-by: Patrick Delaunay

pinctrl: pinctrl_stm32: Populate uc_priv->name[] with pinmux node's name

2022-09-15T13:55:30+00:00

Populate uc_priv->name[] with pinmux node's name in order to indicate
the pinmuxing's name in case GPIO is configured in alternate.

For example, for STM32 SoC's based platform, "gpio status" command
output :

  before
    Bank GPIOZ:
      GPIOZ0: unused : 0 [ ]
      GPIOZ1: unused : 0 [ ]
      GPIOZ2: unused : 0 [ ]
      GPIOZ3: unused : 0 [ ]
      GPIOZ4: func
      GPIOZ5: func
      GPIOZ6: unused : 0 [ ]
      GPIOZ7: unused : 0 [ ]
      GPIOZ8: unknown
      GPIOZ9: unknown
      GPIOZ10: unknown
      GPIOZ11: unknown
      GPIOZ12: unknown
      GPIOZ13: unknown
      GPIOZ14: unknown
      GPIOZ15: unknown

  After
    Bank GPIOZ:
      GPIOZ0: unused : 0 [ ]
      GPIOZ1: unused : 0 [ ]
      GPIOZ2: unused : 0 [ ]
      GPIOZ3: unused : 0 [ ]
      GPIOZ4: func i2c4-0
      GPIOZ5: func i2c4-0
      GPIOZ6: unused : 0 [ ]
      GPIOZ7: unused : 0 [ ]
      GPIOZ8: unknown
      GPIOZ9: unknown
      GPIOZ10: unknown
      GPIOZ11: unknown
      GPIOZ12: unknown
      GPIOZ13: unknown
      GPIOZ14: unknown
      GPIOZ15: unknown

Signed-off-by: Patrice Chotard 
Reviewed-by: Patrick Delaunay

pinctrl: stm32: add support of STM32MP135

2022-06-17T07:58:21+00:00

Add support for "st,stm32mp135-pinctrl" for STM32MP13x

Signed-off-by: Patrick Delaunay 
Reviewed-by: Patrice Chotard