u-boot.git/drivers/pinctrl/qcom, branch v2024.07

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36Z

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

pinctrl: Remove and add needed includes

2024-05-07T14:00:56Z

Remove from this driver directory and when needed add missing include files directly. Reviewed-by: Peter Robinson Signed-off-by: Tom Rini

Merge https://source.denx.de/u-boot/custodians/u-boot-snapdragon

2024-04-23T20:13:51Z

Support is added for 5 new Qualcomm SoCs: * QCM2290 and SM6115 are low and mid range SoCs used on the RB1 and RB2 respectively. SM6115 is also used in some mid-range smartphones/tablets. Initial support includes buttons and USB (host and gadget). * SM8250 is a flagship SoC from 2020 used on the RB5, as well as many flagship smartphones. The board can boot to a U-Boot prompt, but is missing regulators necessary for USB support. * SM8550, and SM8650 are flagship mobile SoCs from 2023 and 2024 respectively. Found on many high end smartphones. In addition: * Support is added for the Schneider HMIBSC board. * mach-snapdragon switches to OF_UPSTREAM * IPQ40xx gets several regressions fixed and some overall cleanup. * The MSM serial driver gains the ability to generate the bit-clock automatically, no longer relying on a custom DT property. * The Qualcomm SMMU driver gets a generic compatible (so per-SoC compatibles don't need to be added). * Support for the GENI I2C controller is added. * The qcom SPMI driver has SPMI v5 support fixed, and v7 support added. * The qcom sdhci driver gets some fixes for SDCC v5 support. * SDM845 gains sdcard support * Support is added for the Synopsys eUSB2 PHY driver (used on SM8550 and SM8650) * SYS_INIT_SP_BSS_OFFSET is set to 1.5M to give us more space for FDTs. * RB2 gets a work-around to fix the USB dr_mode property before booting Linux.

pinctrl: qcom: apq8016: Add GPIO pinctrl function

2024-04-23T11:29:24Z

Add GPIO pinctrl function to enable driving GPIO pins as output low or high. Signed-off-by: Sumit Garg Signed-off-by: Caleb Connolly

pinctrl: qcom: Add support for driving GPIO pins output

2024-04-23T11:29:23Z

Add support for driving the GPIO pins as output low or high. Signed-off-by: Sumit Garg Reviewed-by: Neil Armstrong Signed-off-by: Caleb Connolly

apq8016: Add support for UART1 clocks and pinmux

2024-04-23T11:29:22Z

SE HMIBSC board uses UART1 as the main debug console, so add corresponding clocks and pinmux support. Along with that update instructions to enable clocks for debug UART support. Reviewed-by: Caleb Connolly Signed-off-by: Sumit Garg Signed-off-by: Caleb Connolly

pinctrl: qcom: ipq4019: support all pin functions

2024-04-23T11:29:21Z

Currently, IPQ4019 pinctrl driver supports only a very limited number of pin functions and is not fully DT compatible with Linux pinctrl nodes. IPQ40xx SoC-s sometimes use different pin function numbers for the same function depending on the pin number, so for example I2C0 on GPIO58 uses function number 3 while on GPIO59 it uses function number 2. So, in order to make the driver compatible with upstream DTS to avoid the need to patch the pinctrl nodes in U-Boot and support all of the missing pin functions lets rework the driver based on upstream Linux IPQ4019 pinctrl driver and the pending SM8150 U-Boot pinctrl driver which also uses different function numbers pased on the exact pin number. Signed-off-by: Robert Marko Signed-off-by: Caleb Connolly

pinctrl: qcom: ipq4019: enable DM_FLAG_PRE_RELOC

2024-04-23T11:29:20Z

If compiled with logging and debug UART support, the following is printed: serial_msm serial@78af000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19 This is due to the fact that IPQ4019 pinctrl driver is not available prior to relocation and thus MSM serial will fail probing as pinctrl provider is not available. So, lets enable DM_FLAG_PRE_RELOC for IPQ4019 pinctrl to fix this. Signed-off-by: Robert Marko Signed-off-by: Caleb Connolly

pinctrl: qcom: ipq4019: adapt pin name lookup to upstream DTS

2024-04-23T11:29:20Z

We want to use OF_UPSTREAM on IPQ40XX as its well supported upstream, so as a preparation update pinctrl driver to look for the upstream pin format. Signed-off-by: Robert Marko Reviewed-by: Caleb Connolly Signed-off-by: Caleb Connolly

pinctrl: qcom: allow selecting with ARCH_IPQ40XX

2024-04-23T11:29:19Z

IPQ4019 pinctrl driver was moved to the dedicated Qualcomm pinctrl directory, but the KConfig depends on ARCH_SNAPDRAGON only and thus PINCTRL_QCOM_IPQ4019 cannot be selected when ARCH_IPQ40XX is used. Fixes: 24d2908e987a ("pinctrl: qcom: move ipq4019 driver from mach-ipq40xx") Signed-off-by: Robert Marko Reviewed-by: Caleb Connolly Signed-off-by: Caleb Connolly