u-boot.git/drivers/pinctrl/qcom, branch v2024.10

pinctrl: qcom: sm8650: add special pins pins configuration data

2024-07-05T10:04:48+00:00

Add the special pins configuration data to allow setup the bias
of the UFS and SDCard pins on the SM8650 SoC.

Signed-off-by: Neil Armstrong 
Reviewed-by: Sumit Garg

pinctrl: qcom: sm8550: add special pins pins configuration data

2024-07-05T10:04:48+00:00

Add the special pins configuration data to allow setup the bias
of the UFS and SDCard pins on the SM8550 SoC.

Signed-off-by: Neil Armstrong 
Reviewed-by: Sumit Garg

pinctrl: qcom: add support setting pin configuration for special pins

2024-07-05T10:04:48+00:00

Use the previously introduced msm_special_pin_data to setup the special
pins configuration if the SoC driver have them specified.

Signed-off-by: Neil Armstrong 
Reviewed-by: Sumit Garg

pinctrl: qcom: add support for bias-pull-down

2024-07-05T10:04:48+00:00

Add support for bias-pull-down as an alternate of bias-pull-up.

Signed-off-by: Neil Armstrong

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

pinctrl: Remove and add needed includes

2024-05-07T14:00:56+00:00

Remove  from this driver directory and when needed
add missing include files directly.

Reviewed-by: Peter Robinson 
Signed-off-by: Tom Rini

Merge https://source.denx.de/u-boot/custodians/u-boot-snapdragon

2024-04-23T20:13:51+00:00

Support is added for 5 new Qualcomm SoCs:

* QCM2290 and SM6115 are low and mid range SoCs used on the RB1 and RB2
  respectively. SM6115 is also used in some mid-range smartphones/tablets.
  Initial support includes buttons and USB (host and gadget).
* SM8250 is a flagship SoC from 2020 used on the RB5, as well as many flagship
  smartphones. The board can boot to a U-Boot prompt, but is missing regulators
  necessary for USB support.
* SM8550, and SM8650 are flagship mobile SoCs from 2023 and 2024
  respectively. Found on many high end smartphones.

In addition:

* Support is added for the Schneider HMIBSC board.
* mach-snapdragon switches to OF_UPSTREAM
* IPQ40xx gets several regressions fixed and some overall cleanup.
* The MSM serial driver gains the ability to generate the bit-clock
  automatically, no longer relying on a custom DT property.
* The Qualcomm SMMU driver gets a generic compatible (so per-SoC compatibles
  don't need to be added).
* Support for the GENI I2C controller is added.
* The qcom SPMI driver has SPMI v5 support fixed, and v7 support added.
* The qcom sdhci driver gets some fixes for SDCC v5 support.
* SDM845 gains sdcard support
* Support is added for the Synopsys eUSB2 PHY driver (used on SM8550 and SM8650)
* SYS_INIT_SP_BSS_OFFSET is set to 1.5M to give us more space for FDTs.
* RB2 gets a work-around to fix the USB dr_mode property before booting Linux.

pinctrl: qcom: apq8016: Add GPIO pinctrl function

2024-04-23T11:29:24+00:00

Add GPIO pinctrl function to enable driving GPIO pins as output low or
high.

Signed-off-by: Sumit Garg 
Signed-off-by: Caleb Connolly

pinctrl: qcom: Add support for driving GPIO pins output

2024-04-23T11:29:23+00:00

Add support for driving the GPIO pins as output low or high.

Signed-off-by: Sumit Garg 
Reviewed-by: Neil Armstrong 
Signed-off-by: Caleb Connolly