u-boot.git/drivers/pinctrl/rockchip/Makefile, branch v2020.04

pinctrl: rockchip: Add pinctrl support for rk3308

2019-12-05T16:06:23Z

An iomux register contains 8 pins, each of which is represented by 2 bits, but the register offset is 0x8. For example, GRF_GPIO0A_IOMUX offset is 0x0, but GRF_GPIO0B_IOMUX offset is 0x8, the offset 0x4 is reserved. So add a type IOMUX_8WIDTH_2BIT to calculate offset. Signed-off-by: David Wu Reviewed-by: Kever Yang

pinctrl: rockchip: add px30 pinctrl driver

2019-11-17T09:23:04Z

Add the necessary glue code to allow pinctrl setting on px30 socs. Signed-off-by: David Wu Signed-off-by: Heiko Stuebner Reviewed-by: Kever Yang

pinctrl: rockchip: Add common rockchip pinctrl driver

2019-02-01T15:59:11Z

Use this driver to fit all Rockchip SOCs and to support the desired pinctrl configuration via DTS. Signed-off-by: David Wu Acked-by: Heiko Stuebner Reviewed-by: Kever Yang Reviewed-by: Philipp Tomsich

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

rockchip: rk3128: add pinctrl driver

2017-11-30T21:55:26Z

Add rk3128 pinctrl driver and grf/iomux structure definition. Signed-off-by: Kever Yang Acked-by: Philipp Tomsich Reviewed-by: Philipp Tomsich

rockchip: rk322x: add pinctrl driver

2017-07-11T10:13:46Z

Add init pinctrl driver support for: - i2c; - spi; - uart; - pwm; - emmc/sdmmc; Signed-off-by: Kever Yang Reviewed-by: Philipp Tomsich

rockchip: pinctrl: Add rv1108 pinctrl driver

2017-06-07T13:29:24Z

Add pinctrl support for Rockchip rv1108 soc Signed-off-by: Andy Yan Reviewed-by: Simon Glass

rockchip: rk3368: Add pinctrl driver

2017-06-07T13:29:19Z

Add driver to support iomux setup for the most commonly used peripherals on rk3368. Signed-off-by: Andy Yan Reviewed-by: Simon Glass

pinctrl: Kconfig: sort pinctrl config options to prevent future clutter

2017-04-27T20:49:04Z

This originally started out as "pinctrl: Kconfig: reorder to keep Rockchip options together" and tried to keep the Rockchip-related config options together. However, we now rewrite all chip-specific driver selections to start with CONFIG_PINCTRL_ (with the inadvertent changes to related Makefiles) and sort those alphabetically. And as this already means touching most of the file, we also reformat the help text to not exceed 80 characters (but make full use of those 80 characters). Signed-off-by: Philipp Tomsich Acked-by: Simon Glass

rockchip: rk3328: add pinctrl driver

2017-03-16T22:03:46Z

Add rk3328 pinctrl driver and grf/iomux structure definition. Signed-off-by: William Zhang Signed-off-by: Kever Yang Acked-by: Simon Glass