u-boot.git/drivers/pinctrl, branch v2019.04

pinctrl: rockchip: Add 32bit writing function for rk3288 gpio0 pinctrl

2019-03-29T08:24:44+00:00

There are no higher 16 writing corresponding bits for pmu_gpio0's
iomux/drive/pull at rk3288, need to read the value from register
firstly. Add the flag to distinguish it from normal registers.

Signed-off-by: David Wu

pinctrl: add imx8m driver

2019-03-13T08:14:35+00:00

Add i.mx8m pinctrl driver.

Signed-off-by: Peng Fan

pinctrl: renesas: r8a77990: Reivse USB ID pin name

2019-03-04T00:46:05+00:00

Since the datasheet Rev.1.00 has an error about the USB ID pin name,
this patch revises it.

Signed-off-by: Hiroyuki Yokoyama 
Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu

pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit3 when using TX0

2019-03-04T00:46:05+00:00

According to the R-Car Gen3 Hardware Manual Errata for Rev 1.50,
the MOD_SEL0 bit3 is set to 0 when TX0_A pin function is selected,
and the MOD_SEL0 bit3 is set to 1 when TX0_B pin function is
selected.

Signed-off-by: Hiroyuki Yokoyama 
Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu

pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit16 when using NFALE and NFRB_N

2019-03-04T00:46:05+00:00

According to the R-Car Gen3 Hardware Manual Rev.1.50, the MOD_SEL0
bit16 is set to 0 when NFALE_A and NFRB_N_A pin functions are
selected.

Signed-off-by: Hiroyuki Yokoyama 
Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu

pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit2 when using RX2,TX2 and SCK2

2019-03-04T00:46:05+00:00

According to the R-Car Gen3 Hardware Manual Rev 1.50, the MOD_SEL0
bit2 is set when RX2_{A,B}, TX2_{A,B} and SCK2_A pin functions are
selected.

Signed-off-by: Hiroyuki Yokoyama 
Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu

pinctrl: renesas: r8a77990: Fix rename RTSx_N_TANS_x to RTSx_N_x

2019-03-04T00:46:05+00:00

This patch fixes the allocation name "RTSx_N_TANS_x" of IPSR /
 MOD_SEL0/1 of r8a77990 to "RTSx_N_x". This information was
confirmed in the R-Car Gen3 Hardware Manual Rev.1.50.

Signed-off-by: Hiroyuki Yokoyama 
Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu

pinctrl: renesas: Fix r8a779{6,65} rename sel_ndfc to sel_ndf

2019-03-04T00:46:05+00:00

This patch fixes the allocation name "sel_ndfc" of MOD_SEL2[22]
of r8a7796 / r8a77965 to "sel_ndf". This information was confirmed
in the R-Car Gen3 Hardware Manual Rev.1.50.

Signed-off-by: Hiroyuki Yokoyama 
Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu

pinctrl: renesas: Remove r8a779{5,6,65} CC5_OSCOUT of IP17

2019-03-04T00:46:05+00:00

This patch removes CC5_OSCOUT assignment of IP17[3:0] of r8a7795
 / r8a7796 / r8a77965. This information was confirmed in the R-Car
Gen3 Hardware Manual Rev.1.50.

Signed-off-by: Hiroyuki Yokoyama 
Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu

pinctrl: renesas: Fix r8a779{5,6,65} rename sel_adg_ to sel_adg

2019-03-04T00:46:05+00:00

This patch fixes to the correct names, and "_" is not include after
"adg" for r8a7795/r8a7796/r8a77965. This information was confirmed
in the R-Car Gen3 Hardware Manual Rev.1.50.

Signed-off-by: Hiroyuki Yokoyama 
Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu