An iomux register contains 8 pins, each of which is represented
by 2 bits, but the register offset is 0x8.

For example, GRF_GPIO0A_IOMUX offset is 0x0, but GRF_GPIO0B_IOMUX
offset is 0x8, the offset 0x4 is reserved.

So add a type IOMUX_8WIDTH_2BIT to calculate offset.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Add Pinctrl driver for MediaTek MT8518 SoC.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>

U-Boot support on Raspberry Pi 4 relies on the device-tree
provided by the firmware. The blob does not contain the
U-Boot specific pre-loc-rel properties. The result is, that
the U-Boot banner is not printed.

We fix this by setting the DM_FLAG_PRE_RELOC flag in the driver,
if we rely on a device-tree provided by the firmware.

Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

The Raspberry Pi 4 upstream kernel device tree instroduces
a new compatible for the pinctroller. Add this to the driver
so that we can boot with the upstream kernel DT.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>

- Add support for rockchip SoC: PX30, RK3308
- Add and migrate to use common dram driver: PX30, RK3328, RK3399
- Add rk3399 board Tinker-s support
- Board config update for Rock960, Rockpro64

Add the necessary glue code to allow pinctrl setting on px30 socs.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Remove the pinctrl_decode_pin_config() API, because this
function is unused and not compatible with livetree
(it uses fdtdec_get_bool instead of ofnode API).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Support i.MX8MN in imx8m pinctrl driver

Signed-off-by: Peng Fan <peng.fan@nxp.com>

This patch adds pinctrl support for mt7628, with a file for common pinmux
functions and a file for mt7628 which has additional support for pinconf.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>

Correct the name of the define used CONFIG_IS_ENABLED which is
not aligned with Kconfig name: CONFIG_$(SPL_)PINCONF_RECURSIVE.

The recursive calls is conditional only for UCLASS_PINCONFIG
"pinconfig" driver.
It is always needed to call pinctrl_post_bind for UCLASS_PINCTRL
"pinctrl", the test CONFIG_IS_ENABLED(PINCONF_RECURSIVE) need to
be removed for this driver.

This correct a regression introduced because the same patch is
applied twice times in u-boot-dm branch:
- commit e878b53a79d1 ("dm: pinctrl: introduce PINCONF_RECURSIVE
  option")
- commit c20851b3d850 ("dm: pinctrl: introduce PINCONF_RECURSIVE
  option")

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>