u-boot.git/drivers/pinctrl, branch v2022.04-rc2

doc: replace @return by Return:

2022-01-19T17:11:34Z

Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt

pinctrl: single: add support for pinctrl-single, pins when #pinctrl-cells = 2

2022-01-18T13:31:02Z

Changes to the am33xx device (33e9021a) trees have been merged in from the upstream linux kernel which now means the device tree uses the new pins format (as of 5.10) where the confinguration can be stores as a separate configuration value and pin mux mode which are then OR'd together. This patch adds support for the new format to u-boot so that pinctrl-cells is now respected when reading in pinctrl-single,pins Signed-off-by: Anthony Bagwell

pinctrl: stmfx: define LOG_CATEGORY

2021-11-30T10:20:34Z

Define LOG_CATEGORY to allow filtering with log command. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard

Merge tag 'v2022.01-rc3' into next

2021-11-29T17:00:57Z

Prepare v2022.01-rc3 Signed-off-by: Tom Rini

pinctrl: meson: Correct the driver GPIO declaration

2021-11-19T17:15:26Z

This should use the provided U_BOOT_DRIVER() macro so that the driver gets added to the appropriate linker list. Fix it. Signed-off-by: Simon Glass Fixes: 7c9dcfed50f ("pinctrl: meson: rework gx pmx function") Reported-by: Tom Rini Tested-by: Tom Rini on libretech-cc Signed-off-by: Neil Armstrong

pinctrl: Add Apple pinctrl driver

2021-11-17T22:04:58Z

This driver supports both pin muxing and GPIO support for the pin control logic found on Apple SoCs. Signed-off-by: Mark Kettenis

aspeed: AST2600 Pinctrl Driver

2021-11-17T22:04:58Z

This driver uses Pinctrl framework and is compatible with the Linux driver for AST2600. Signed-off-by: Ryan Chen Signed-off-by: Dylan Hung

Merge tag 'u-boot-stm32-20211110' of https://source.denx.de/u-boot/custodians/u-boot-stm

2021-11-10T19:11:30Z

- DHSOM update: - Remove nWP GPIO hog - Increase SF bus frequency to 50Mhz and enable SFDP - Disable video output for DHSOM - Disable EFI - Enable DFU_MTD support - Create include file for STM32 gpio driver private data - Split board and SOC STM32MP15 configuration - Device tree alignement with v5.15-rc6 for STM32MP15 - Add binman support for STM32MP15x - Normalise newlines for stm32prog - Update OTP shadow registers in SPL

gpio: stm32: create include file for driver private data

2021-11-10T16:03:36Z

The stm32 gpio driver private data are not needed in arch include files, they are not used by code except for stm32 gpio and pincontrol drivers, using the same IP; the defines for this IP is moved in a new file "stm32_gpio_priv.h" in driver/gpio. This patch avoids to have duplicated file gpio.h for each SOC in MPU directory mach-stm32mp and in each MCU directory arch-stm32* and allows to remove CONFIG_GPIO_EXTRA_HEADER for all STM32. Signed-off-by: Patrick Delaunay Reviewed-by: Simon Glass Reviewed-by: Patrice Chotard

exynos78x0: pinctrl: set const to structs

2021-11-09T05:07:46Z

to fix following checkpatch warings. WARNING: struct should normally be const Signed-off-by: Minkyu Kang Cc: Dzmitry Sankouski Reviewed-by: Jaehoon Chung