The pin count wasn't updated when the special pins were added, as a
result it was never possible to configure the special pins on SM8250
boards.

Fix the pin count and allow the special pins to be configured. This
fixes sdcard support on the RB5.

Fixes: 58fa52042471 ("pinctr: qcom: sm8250: add special pins pins configuration data")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>

The pinmux bits for GPIO2-B0 to GPIO2-B6 actually have 2 bits width,
correct the bank flag for GPIO2-B. The pinmux bits for GPIO2-B7 is
recalculated so it remain unchanged. Add missing GPIO3-B1 to GPIO3-B7
pinmux data to rk3328_mux_recalced_data as mux register offset for these
pins does not follow rockchip convention.

This matches changes in following Linux commits:
- e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins")
- 5ef6914e0bf5 ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO3-B pins")
- 128f71fe014f ("pinctrl: rockchip: correct RK3328 iomux width flag for GPIO2-B pins")

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Pin detection on t20 depends on node name. With recent changes
in node naming, let's remove '_' to be safe about both '_' or
'-' use.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>

This patch add support to read register base address by name if
provided.

Also devfdt_get_addr_* is changed to dev_read_addr_* to support DT
live tree.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>

The reg-names in mt7988.dtsi have no _base suffix. Remove the suffix
will also make it match upstream linux format.

Fixes: 8c2cb748ef5 (pinctrl: mediatek: mt7988: rename reg-names to upstream linux format)
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>

Christian Marangi <ansuelsmth@gmail.com> says:

This is the last batch of part to push actual support of
OF_UPSTREAM for the mediatek SoC.

The plan is to make the current downstream DTS on part with
upstream implementation so we can permit a gradual transition to
it while we don't cause any regression to any user.

This is to have the same node downstream and upstream.
Mediatek is working hard upstream to also push all the remaining
nodes.

All patch are the final changes after the pinctrl patch
merged previously.

All patch pass CI tests

Link: https://github.com/u-boot/u-boot/pull/731
Link: https://lore.kernel.org/r/20250127134046.26345-1-ansuelsmth@gmail.com

Rename reg-names to upstream linux format. Upstream linux drop the
"_base". To make use of upstream DTSI, align to the upstream naming.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>

Use the driver macros so that the driver appears in the
linker list.

Reported-by: Simon Glass <sjg@chromium.org>
Fixes: 732f01aabf53 ("pinctrl: starfive: Add StarFive JH7110 driver")
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>

Update mt7981 pinctrl driver based on upstream kernel

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>

Weijie Gao <weijie.gao@mediatek.com> says:

This patch series add support for MediaTek MT7987 SoC with its reference
boards and related drivers.

This patch series add basic boot support on eMMC/SD/SPI-NOR/SPI-NAND for these
boards. The clock, pinctrl drivers and the SoC initializaton code are also
included.

Link: https://lore.kernel.org/r/cover.1737621362.git.weijie.gao@mediatek.com