u-boot.git/drivers/power/Makefile, branch v2016.09

sunxi: power: add AXP809 support

2016-05-25T15:52:39+00:00

The A80 uses the AXP809 as its primary PMIC.

Signed-off-by: Chen-Yu Tsai 
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede

sunxi: power: add support for sy8106a driver

2016-02-23T19:50:07+00:00

SY8106A is a PMIC which is used on the Allwinner
H3 Orange Pi Pc and Plus board. The VOUT1_SEL register is
implemented to set the default V-CPU voltage to 1200 mV.

This driver is required to ensure the SY8106A V-CPU
voltage is set to 1200 mV after a software reset. On cold
boot the default SY8106A output voltage is selected to be
1200 mV by a pair of resistors on the Orange Pi PC and Plus.

Signed-off-by: Jelle van der Waa 
Tested-by: Siarhei Siamashka 
Acked-by: Siarhei Siamashka 
Signed-off-by: Hans de Goede

sunxi: power: axp818: add support for axp818 driver

2015-12-10T10:14:22+00:00

AXP818 is rsb based PMIC and used on Allwinner A83T H8 Homlet dev board.
It's registers are different and calculating reg config is different than
that of earlier axp power ICs.

DCDC1, DCDC2, DCDC3 and DCDC5 is implemented at the moment.
all other voltages can be added subsequently.
AXP datasheet is uploaded to wiki:
http://linux-sunxi.org/File:AXP818_datasheet_Revision1.0.pdf

Signed-off-by: Vishnu Patekar 
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede

dm: regulator: add max77686 regulator driver

2015-05-15T00:49:38+00:00

This commit adds support to MAX77686 regulator driver,
based on a driver model regulator's API. It implements
almost all regulator operations, beside those for setting
and geting the Current value.
For proper bind and operation it requires the MAX77686 PMIC driver.

New file: drivers/power/regulator/max77686.c
New config: CONFIG_DM_REGULATOR_MAX77686

Signed-off-by: Przemyslaw Marczak 
Acked-by: Simon Glass

power: Add AMS AS3722 PMIC support

2014-12-18T20:19:20+00:00

The AS3722 provides a number of DC/DC converters and LDOs as well as 8
GPIOs.

Signed-off-by: Thierry Reding 
Signed-off-by: Simon Glass 
Signed-off-by: Tom Warren

sun6i: Add basic axp221 driver

2014-11-13T13:49:01+00:00

The A31 uses the AXP221 pmic for various voltages.

Signed-off-by: Oliver Schinagl 
Signed-off-by: Hans de Goede 
Acked-by: Ian Campbell 
--
Changes in v2:
-Rebase
Changes in v3:
-Add support for all dldo and aldo-s
-Add Kconfig option to select building AXP221 and to select voltage of
 dldo and aldo-s
Changes in v4:
-Add axp221_setbits helper function
-Use symbolic names for enabled bits in CTRL1 - CTRL3 registers

sunxi: Add axp152 pmic support

2014-07-18T18:42:16+00:00

Add support for the x-powers axp152 pmic which is found on most A10s boards
and enable it for the r7-tv-dongle board.

Signed-off-by: Henrik Nordstrom 
Signed-off-by: Ian Campbell 
Signed-off-by: Hans de Goede 
Acked-by: Ian Campbell

sunxi: Add axp209 pmic support

2014-07-18T18:42:10+00:00

Add support for the x-powers axp209 pmic which is found on most A10, A13 and
A20 boards.

And enable AXP209 support for the Cubietruck and Cubieboard boards.

Signed-off-by: Henrik Nordstrom 
Signed-off-by: Hans de Goede 
Acked-by: Ian Campbell

drivers: convert makefiles to Kbuild style

2013-10-31T17:26:01+00:00

Signed-off-by: Masahiro Yamada

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini