u-boot.git/drivers/power/pmic, branch v2015.04

pmic: add tps62362 simple wrapper code

2015-01-13T20:26:10Z

This regulator is used with AM437x IDK to feed VDD_MPU, without means to scale VDD_MPU we can't support higher frequencies. Signed-off-by: Felipe Balbi

arm: odroid: pmic77686: allow buck voltage settings

2014-11-17T10:33:21Z

Allow to set the buck voltage for the max77686. This will be used to reset the SMC LAN9730 ethernet on the odroids. Signed-off-by: Suriyan Ramasami Signed-off-by: Minkyu Kang

cros_ec: exynos: Use the correct tps65090 driver in each case

2014-10-08T08:25:47Z

Exynos 5250 boards (snow, spring) use the I2C driver but Exynos 5420 boards cannot due to a hardware design decision. Select the correct driver to use in each case. Signed-off-by: Simon Glass Tested-by: Ajay Kumar Signed-off-by: Minkyu Kang

cros_ec: power: Add a tunnelled version of the tps65090 driver

2014-10-08T08:25:46Z

Unfortunately on Pit the AP has no direct access to the tps65090 but must talk through the EC (over SPI) to the EC's I2C bus. When driver model supports PMICs this will be relatively easy. In the meantime the best approach is to duplicate the driver. It will be refactored once driver model support is expanded. Signed-off-by: Simon Glass Tested-by: Ajay Kumar Signed-off-by: Minkyu Kang

pmic: pmic_pfuze100: Use a shorter name for PMIC name

2014-08-08T08:29:41Z

It is redundant to use 'PFUZE100_PMIC' as the PMIC name because we already know it is a PMIC. Call it simply 'PFUZE100' instead. Cc: Tim Harvey Cc: Markus Niebel Signed-off-by: Fabio Estevam

tps65218/am43xx_evm: Add power framework support to TPS65218

2014-07-25T19:21:06Z

Add in an init function for the drivers/power framework so we can dump and read the registers via i2c. Cc: Łukasz Majewski Signed-off-by: Tom Rini

Merge remote-tracking branch 'u-boot-samsung/master'

2014-07-01T18:52:51Z

Conflicts: boards.cfg Conflict was trivial between goni maintainer change and lager_nor removal.

PMIC: MAX77686: fix invalid bus check

2014-06-23T01:04:13Z

Since p->bus is unsigned checking for negative values is optimized away. Since bus is already used as an argument use tmp. While at it, don't declare variables in the middle of a function. cc: Rajeshwari Shinde Signed-off-by: Jeroen Hofstee Signed-off-by: Minkyu Kang

pmic: tps65090: correct checking i2c bus

2014-06-19T15:19:05Z

The function tps65090_init checks the i2c bus of p->bus. However the pointer p is not intialiased at this point. Check the local variable bus instead. cc: Tom Wai-Hong Tam Signed-off-by: Jeroen Hofstee Acked-by: Simon Glass

power: Add support for the TPS65218 PMIC

2014-06-06T21:46:16Z

Add a driver for the TPS65218 PMIC which is used by TI AM43xx SoCs and may be used by TI AM335x SoCs. Signed-off-by: Tom Rini