u-boot.git/drivers/power/pmic, branch v2018.07

power: pmic: Let PFUZE3000 see all 256 registers

2018-06-27T07:47:46Z

The PFUZE3000 uses registers addresses up to 0xff. The DM pfuze100 driver supports both pfuze100 and pfuze3000. Allow it to use the device type to return the correct number of registers. Also rename the too generic PMIC_NUM_OF_REGS enumeration value for pfuze3000 to match the other "PFUZE3000_" prefixed enumerations and the pfuze100 enumeration value PFUZE100_NUM_OF_REGS. Cc: Peng Fan Cc: Jaehoon Chung Cc: Stefano Babic Cc: Fabio Estevam Signed-off-by: Trent Piepho Reviewed-by: Fabio Estevam

sandbox: Rewrite i2c_pmic_emul.c to support PMIC with 3 bytes transmission

2018-05-18T06:27:26Z

This change enables support for MC34708 PMIC in sandbox. Now we can emulate the I2C transfers larger than 1 byte. Notable changes for this driver: - From now on the register number is not equal to index in the buffer, which emulates the PMIC registers - The PMIC register's pool is now dynamically allocated up till 64 regs * 3 bytes each = 192 B Signed-off-by: Lukasz Majewski Reviewed-by: Simon Glass

pmic: dm: Add support for MC34708 for PMIC DM

2018-05-18T06:27:26Z

This patch adds support for MC34708 PMIC, to be used with driver model (DM). Signed-off-by: Lukasz Majewski Reviewed-by: Simon Glass

pmic: dm: Rewrite pmic_reg_{read|write|clrsetbits} to support 3 bytes transmissions

2018-05-18T06:27:26Z

This commit provides support for transmissions larger than 1 byte for PMIC devices used with DM (e.g. MC34708 from NXP). Signed-off-by: Lukasz Majewski Reviewed-by: Simon Glass

pmic: Add support for setting transmission length in uclass private data

2018-05-18T06:27:26Z

The struct uc_pmic_priv's trans_len field stores the number of types to be transmitted per PMIC transfer. Signed-off-by: Lukasz Majewski Reviewed-by: Simon Glass

Merge git://git.denx.de/u-boot-mmc

2018-05-08T17:47:39Z

power: pmic: stpmu1: Add regulator bindings

2018-05-08T13:07:38Z

Add regulator bindings to get access to regulator managed by drivers/power/regulator/stpmu1.c regulator driver. Signed-off-by: Christophe Kerello Signed-off-by: Patrick Delaunay Signed-off-by: Patrice Chotard

power: pmic_max77686: remove the old pmic_max77686 file

2018-05-08T04:12:33Z

max77686 pmic is supporting with max77686.c under pmic/ and regulator/ direnctroy. Remove pmic_max77686.c what didn't use anywhere. Instead, enable CONFIG_DM_REGULATOR_MAX77686 and CONFIG_DM_PMIC_MAX77686. Signed-off-by: Jaehoon Chung

SPDX: Convert all of our multiple license tags to Linux Kernel style

2018-05-07T14:24:31Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have multiple licenses (in these cases, dual license) declared in the SPDX-License-Identifier tag. In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B" as per the Linux Kernel style document. Note that parenthesis are allowed so when they were used before we continue to use them. Reviewed-by: Fabio Estevam Signed-off-by: Tom Rini

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini