u-boot.git/drivers/power/regulator, branch v2022.01

power: Rename CONFIG_POWER to CONFIG_POWER_LEGACY

2021-09-04T16:26:02Z

This option is used in pre-driver model code and much of it has never been converted to driver model. We want to add a new option to enable power support, so we can use a simple rule in the Makefile. Rename this one, which is really about a particular implementation of power. Also update the pmic.h header file so it either includes the legacy API or the driver model one. Signed-off-by: Simon Glass Reviewed-by: Jaehoon Chung

Rename GPIO_SUPPORT to GPIO

2021-07-28T18:29:36Z

Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass

Rename SPL_POWER_SUPPORT to SPL_POWER

2021-07-28T18:27:54Z

Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass Reviewed-by: Jaehoon Chung

dm: define LOG_CATEGORY for all uclass

2021-07-06T16:38:03Z

Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay Reviewed-by: Simon Glass

power: regulator: Add support for regulator-force-boot-off

2021-04-29T05:38:57Z

Add support for regulator-force-boot-off DT property. This property can be used by the board/device drivers for turning off regulators on early init stages as pre-requisite for the other components initialization. Signed-off-by: Konstantin Porotchkin Signed-off-by: Stefan Roese Cc: Jaehoon Chung Cc: Simon Glass Reviewed-by: Jaehoon Chung

power: regulator: add driver for ANATOP regulator

2021-04-20T11:31:12Z

Anatop is an integrated regulator inside i.MX6 SoC. There are 3 digital regulators which controls PU, CORE (ARM), and SOC. And 3 analog regulators which controls 1P1, 2P5, 3P0 (USB). This patch adds the Anatop regulator driver. Signed-off-by: Ying-Chun Liu (PaulLiu) Reviewed-by: Sean Anderson Cc: Fabio Estevam Cc: Jaehoon Chung Cc: Peng Fan Reviewed-by: Jaehoon Chung

firmware: scmi: voltage regulator

2021-04-12T21:17:11Z

Implement voltage regulators interfaced by the SCMI voltage domain protocol. The DT bindings are defined in the Linux kernel since SCMI voltage domain and regulators patches [1] and [2] integration in v5.11-rc7. Link: [1] https://github.com/torvalds/linux/commit/0f80fcec08e9c50b8d2992cf26495673765ebaba Link: [2] https://github.com/torvalds/linux/commit/2add5cacff3531e54c50b0832128299faa9f0563 Signed-off-by: Etienne Carriere Reviewed-by: Jaehoon Chung

common: Drop asm/global_data.h from common header

2021-02-02T20:33:42Z

Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include at all, so remove that include. Signed-off-by: Simon Glass Signed-off-by: Tom Rini

power: regulator: Kconfig: add a dependency for POWER_SUPPORT for SPL

2021-01-16T19:49:09Z

power/regulator will not be built if just CONFIG_SPL_DM_REGULATOR is enabled. It needs CONFIG_SPL_POWER_SUPPORT to be enabled as well. For example, if we just need a GPIO regulator in SPL: CONFIG_DM_REGULATOR=y CONFIG_SPL_DM_REGULATOR=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_SPL_DM_REGULATOR_GPIO=y Will not suffice, since the entire regulator build for SPL depends on CONFIG_SPL_POWER_SUPPORT. Elaborate that information in the Kconfig dependency. Signed-off-by: Nishanth Menon Reviewed-by: Jaehoon Chung

power: regulator: stm32-verfbuf: define LOG_CATEGORY

2021-01-13T08:52:58Z

Define LOG_CATEGORY to allow filtering with log command. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard