u-boot.git/drivers/power/regulator, branch v2022.04

drivers: power: regulator: tps65941_regulator: Add support for 3Phase buck

2022-02-16T19:19:29Z

Buck regulator 1, 2 and 3 of TPS6594132 on j721e-sk is in 3 Phase confguration, in-order to support this, add configuring 3 Phase buck in tps65941 while driver probing. Signed-off-by: Sinthu Raja Acked-by: Jaehoon Chung

regulator: bd718x7: Bypass bogus warnings

2022-02-05T14:49:01Z

When regulator consumer attempts to set enabled DVS regulator voltage, the driver aborts with "Only DVS bucks can be changed when enabled". In case the regulator is already set to specified voltage, do nothing instead of failing outright. When regulator consumer attempts to set enables regulator which cannot be controlled because it is already always enabled, the driver aborts with -EINVAL. Again, do nothing in such case and return 0, because the request is really fulfilled, the regulator is enabled. Signed-off-by: Marek Vasut Cc: Matti Vaittinen

doc: replace @return by Return:

2022-01-19T17:11:34Z

Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt

power: regulator: scmi: define LOG_CATEGORY

2021-11-23T18:53:03Z

Define LOG_CATEGORY to allow filtering with log command. Signed-off-by: Patrick Delaunay Acked-by: Etienne Carriere Reviewed-by: Jaehoon Chung

power: Rename CONFIG_POWER to CONFIG_POWER_LEGACY

2021-09-04T16:26:02Z

This option is used in pre-driver model code and much of it has never been converted to driver model. We want to add a new option to enable power support, so we can use a simple rule in the Makefile. Rename this one, which is really about a particular implementation of power. Also update the pmic.h header file so it either includes the legacy API or the driver model one. Signed-off-by: Simon Glass Reviewed-by: Jaehoon Chung

Rename GPIO_SUPPORT to GPIO

2021-07-28T18:29:36Z

Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass

Rename SPL_POWER_SUPPORT to SPL_POWER

2021-07-28T18:27:54Z

Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass Reviewed-by: Jaehoon Chung

dm: define LOG_CATEGORY for all uclass

2021-07-06T16:38:03Z

Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay Reviewed-by: Simon Glass

power: regulator: Add support for regulator-force-boot-off

2021-04-29T05:38:57Z

Add support for regulator-force-boot-off DT property. This property can be used by the board/device drivers for turning off regulators on early init stages as pre-requisite for the other components initialization. Signed-off-by: Konstantin Porotchkin Signed-off-by: Stefan Roese Cc: Jaehoon Chung Cc: Simon Glass Reviewed-by: Jaehoon Chung

power: regulator: add driver for ANATOP regulator

2021-04-20T11:31:12Z

Anatop is an integrated regulator inside i.MX6 SoC. There are 3 digital regulators which controls PU, CORE (ARM), and SOC. And 3 analog regulators which controls 1P1, 2P5, 3P0 (USB). This patch adds the Anatop regulator driver. Signed-off-by: Ying-Chun Liu (PaulLiu) Reviewed-by: Sean Anderson Cc: Fabio Estevam Cc: Jaehoon Chung Cc: Peng Fan Reviewed-by: Jaehoon Chung