u-boot.git/drivers/power/regulator, branch v2025.01

power: regulator: replace dev_dbg() by dev_err() in regulator_post_bind()

2024-12-04T22:31:31Z

To ease debugging, use dev_err() instead of dev_dbg() for alerting when regulator has nonunique value. Signed-off-by: Patrice Chotard Reviewed-by: Quentin Schulz Reviewed-by: Jaehoon Chung

power: regulator: replace some debug() by dev_dbg()

2024-12-04T22:31:21Z

Replace some debug() by dev_dbg() when dev variable is available/valid. Signed-off-by: Patrice Chotard Reviewed-by: Quentin Schulz Reviewed-by: Jaehoon Chung

Merge patch series "Tidy up use of 'SPL' and CONFIG_SPL_BUILD"

2024-10-11T18:23:25Z

Simon Glass says: When the SPL build-phase was first created it was designed to solve a particular problem (the need to init SDRAM so that U-Boot proper could be loaded). It has since expanded to become an important part of U-Boot, with three phases now present: TPL, VPL and SPL Due to this history, the term 'SPL' is used to mean both a particular phase (the one before U-Boot proper) and all the non-proper phases. This has become confusing. For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL' phases, not just SPL. So code which can only be compiled for actual SPL, for example, must use something like this: #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) In Makefiles we have similar issues. SPL_ has been used as a variable which expands to either SPL_ or nothing, to chose between options like CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was updated to support 'VPL_' as well. This series starts a change in terminology and usage to resolve the above issues: - The word 'xPL' is used instead of 'SPL' to mean a non-proper build - A new CONFIG_XPL_BUILD define indicates that the current build is an 'xPL' build - The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now defined for TPL and VPL phases - The existing SPL_ Makefile variable is renamed to SPL_ - The existing SPL_TPL Makefile variable is renamed to PHASE_ It should be noted that xpl_phase() can generally be used instead of the above CONFIGs without a code-space or run-time penalty. This series does not attempt to convert all of U-Boot to use this new terminology but it makes a start. In particular, renaming spl.h and common/spl seems like a bridge too far at this point. The series is fully bisectable. It has also been checked to ensure there are no code-size changes on any commit.

global: Rename SPL_TPL_ to PHASE_

2024-10-11T17:44:48Z

Use PHASE_ as the symbol to select a particular XPL build. This means that SPL_TPL_ is no-longer set. Update the comment in bootstage to refer to this symbol, instead of SPL_ Signed-off-by: Simon Glass

global: Rename SPL_ to XPL_

2024-10-11T17:44:48Z

Use XPL_ as the symbol to indicate an SPL build. This means that SPL_ is no-longer set. Signed-off-by: Simon Glass

drivers: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD

2024-10-11T17:44:48Z

Use the new symbol to refer to any 'SPL' build, including TPL and VPL Signed-off-by: Simon Glass

power: pmic/regulator: Support pca9452

2024-10-10T18:17:46Z

Add PCA9452 PMIC/Regulator support. Signed-off-by: Joy Zou Reviewed-by: Ye Li Signed-off-by: Peng Fan

power: regulator: pca9450: Update the BUCK1 voltage range

2024-10-10T18:17:46Z

The pmic could be trimed with updated BUCK1 range, so update the range for trimed pmic. The default value of Toff_Deb is used to distinguish the non-trimed and trimed pmic. Signed-off-by: Joy Zou Reviewed-by: Ye Li Signed-off-by: Peng Fan

power: regulator: Drop regulators_enable_boot_on/off()

2024-10-01T01:19:07Z

Both regulators_enable_boot_on/off() are unused and superseded by regulator uclass regulator_post_probe(). Remove both functions. Signed-off-by: Marek Vasut

power: regulator: Drop regulator_unset()

2024-10-01T01:19:07Z

This function is never called, drop it. Signed-off-by: Marek Vasut