u-boot.git/drivers/power, branch v2016.05 Unnamed repository; edit this file 'description' to name the repository. drivers/power/pmic/pm8916.c: Make usid be uint32_t 2016-04-18T21:11:42+00:00 Tom Rini trini@konsulko.com 2016-04-12T19:11:24+00:00 3bfc8152b2c09d81fb00f4d3990e5dfd59682b96 If get_dev_addr fails it will return FDT_ADDR_T_NONE and: >>> "priv->usid == 4294967295U" is always false regardless of the values of its operands. This occurs as the logical operand of if. Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reported-by: Coverity (CID: 143914) Signed-off-by: Tom Rini <trini@konsulko.com> 
If get_dev_addr fails it will return FDT_ADDR_T_NONE and:
>>>     "priv->usid == 4294967295U" is always false regardless of the values of its operands. This occurs as the logical operand of if.

Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reported-by: Coverity (CID: 143914)
Signed-off-by: Tom Rini <trini@konsulko.com>
pmic: Add support for Qualcomm PM8916 PMIC 2016-04-01T21:18:13+00:00 Mateusz Kulikowski mateusz.kulikowski@gmail.com 2016-03-31T21:12:30+00:00 c2f74c8f53bd2333d85d5063e9d043382df2a987 This PMIC is connected on SPMI bus so needs SPMI support enabled. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> 
This PMIC is connected on SPMI bus so needs SPMI support enabled.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
sunxi: Add support for Allwinner A64 SoCs 2016-04-01T07:52:28+00:00 Siarhei Siamashka siarhei.siamashka@gmail.com 2016-03-29T15:29:10+00:00 d96ebc468d0dff6eb6f069bba03b3f0e33aa22de The Allwinner A64 SoC is used in the Pine64. This patch adds all bits necessary to compile U-Boot for it running in AArch64 mode. Unfortunately SPL is not ready yet due to legal problems, so we need to boot using the binary boot0 for now. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [agraf: remove SPL code, move to AArch64] Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 
The Allwinner A64 SoC is used in the Pine64. This patch adds
all bits necessary to compile U-Boot for it running in AArch64
mode.

Unfortunately SPL is not ready yet due to legal problems, so
we need to boot using the binary boot0 for now.

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
[agraf: remove SPL code, move to AArch64]
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
power: axp818: Add support for FLDOs 2016-03-31T15:03:58+00:00 Chen-Yu Tsai wens@csie.org 2016-03-29T16:26:48+00:00 38491d9c6515eafd97d881cab0420652f07d92a5 The FLDOs on AXP818 PMIC normally provide power to CPUS and USB HSIC PHY on the A83T/H8. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 
The FLDOs on AXP818 PMIC normally provide power to CPUS and USB HSIC PHY
on the A83T/H8.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
power: axp818: Fix DCDC5 default voltage 2016-03-31T15:03:56+00:00 Chen-Yu Tsai wens@csie.org 2016-03-29T16:26:47+00:00 4c6a9ca103f953b6e5e6dfcd56fb558e61ca3c05 DCDC5 is designed to supply VCC-DRAM, which is normally 1.5V for DDR3, 1.35V for DDR3L, and 1.2V for LPDDR3. Also remove CONFIG_AXP_DCDC5_VOLT from h8_homlet_v2_defconfig. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 
DCDC5 is designed to supply VCC-DRAM, which is normally 1.5V for DDR3,
1.35V for DDR3L, and 1.2V for LPDDR3.

Also remove CONFIG_AXP_DCDC5_VOLT from h8_homlet_v2_defconfig.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
power: twl6030: Power off support 2016-03-15T19:12:56+00:00 Paul Kocialkowski contact@paulk.fr 2016-02-27T18:19:12+00:00 d6a2042dbcd4a3a3d8282c77a5882104a5c399a7 This adds support for powering off (the omap SoC) from the twl6030. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> 
This adds support for powering off (the omap SoC) from the twl6030.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
power: twl6030: Remove ifdef around the code 2016-03-15T19:12:56+00:00 Paul Kocialkowski contact@paulk.fr 2016-02-27T18:19:11+00:00 4986c6c79c5ed682d172e51cb34baaf12478e91f The TWL6030 power driver is only built when CONFIG_TWL6030_POWER is selected, thus there is no reason to wrap the code with ifdef. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> 
The TWL6030 power driver is only built when CONFIG_TWL6030_POWER is selected,
thus there is no reason to wrap the code with ifdef.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
power: twl6030: Clear VUSB_IN_PMID bit on USB device setup 2016-03-15T19:12:51+00:00 Paul Kocialkowski contact@paulk.fr 2016-02-27T18:19:04+00:00 6313c6500484ed85892f425e3ca93f706fd9a2ea When booting from USB, the bootrom sets the VUSB_IN_PMID bit of the MISC2 register of the TWL6030. However, U-Boot sets the VUSB_IN_VSYS bit to enable VBUS input. As both bits are contradictory, enabling both disables the input, according to the TWL6030 TRM. Thus, we need to clear the VUSB_IN_PMID bit in case of an USB boot (which could just as well be a memory boot after USB timed out). Signed-off-by: Paul Kocialkowski <contact@paulk.fr> 
When booting from USB, the bootrom sets the VUSB_IN_PMID bit of the MISC2
register of the TWL6030. However, U-Boot sets the VUSB_IN_VSYS bit to enable
VBUS input. As both bits are contradictory, enabling both disables the input,
according to the TWL6030 TRM.

Thus, we need to clear the VUSB_IN_PMID bit in case of an USB boot (which could
just as well be a memory boot after USB timed out).

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
power: twl6030: Configure VUSB voltage on USB device setup 2016-03-15T19:12:50+00:00 Paul Kocialkowski contact@paulk.fr 2016-02-27T18:19:03+00:00 0343f71f0901c87ac38b274eb303d18b70c1e3e9 This explicitly sets VUSB voltage to 3.3V when enabling USB. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> 
This explicitly sets VUSB voltage to 3.3V when enabling USB.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
power: twl6030: Device-index-specific MMC power initialization 2016-03-15T19:10:51+00:00 Paul Kocialkowski contact@paulk.fr 2016-02-27T18:18:51+00:00 a85362fb3e1fc7833723accddbbae431091d06b8 Not every device has multiple MMC slots available, so it makes sense to enable only the required LDOs for the available slots. Generic code in omap_hsmmc will enable both VMMC and VAUX1, in doubt. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> 
Not every device has multiple MMC slots available, so it makes sense to enable
only the required LDOs for the available slots. Generic code in omap_hsmmc will
enable both VMMC and VAUX1, in doubt.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>