u-boot.git/drivers/power, branch v2017.01 Unnamed repository; edit this file 'description' to name the repository. regulator: fixed: Add support to handle enable-active-high DT property 2016-12-27T13:22:57+00:00 Vignesh R vigneshr@ti.com 2016-12-07T11:25:06+00:00 bd2e9714c851770652253fab858cb50ecd95d329 Add support to handle enable-active-high DT property. This property is used to drive the gpio controlling fixed regulator as active high when claiming gpio line. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Simon Glass <sjg@chromium.org> 
Add support to handle enable-active-high DT property. This property is
used to drive the gpio controlling fixed regulator as active high when
claiming gpio line.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
power: pmic: add the max8998 controller for DM 2016-12-22T04:34:01+00:00 Jaehoon Chung jh80.chung@samsung.com 2016-12-15T09:21:10+00:00 103e83a1b0a3f2ef5d82d86711ea3d6b2bbf2a16 Add the max8998 controller for Driver model. Samsung S5P series are using max8998 pmic controller. In future, it should be supported the regulator framework. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> 
Add the max8998 controller for Driver model.
Samsung S5P series are using max8998 pmic controller.
In future, it should be supported the regulator framework.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
ARM: OMAP4+: Add support for getting pbias info from board 2016-12-04T18:54:51+00:00 Lokesh Vutla lokeshvutla@ti.com 2016-11-23T07:55:28+00:00 b4b060066f158a461780dfb06a042bb6351a2b3c Palmas driver assumes it is always TPS659xx regulator on all DRA7xx based boards to enable mmc regulator. This is not true always like in case of DRA71x-evm. So get this information based on the board. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Delete omap4_vmmc_pbias_config from omap_hsmmc.c] Signed-off-by: Tom Rini <trini@konsulko.com> 
Palmas driver assumes it is always TPS659xx regulator on all DRA7xx based
boards to enable mmc regulator. This is not true always like in case of
DRA71x-evm. So get this information based on the board.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Delete omap4_vmmc_pbias_config from omap_hsmmc.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XX 2016-12-03T18:21:11+00:00 Nishanth Menon nm@ti.com 2016-11-29T09:52:00+00:00 3891a54f479838bce3f9b298572200c9508106fc CONFIG_AM57XX is just an unnecessary macro that is redundant given So, remove the same instead of spreading through out the u-boot source code and getting in the way to maintain common code for DRA7x family. Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> 
CONFIG_AM57XX is just an unnecessary macro that is redundant given So,
remove the same instead of spreading through out the u-boot source
code and getting in the way to maintain common code for DRA7x family.

Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
power: regulator: Add limits checking while setting current 2016-11-26T00:59:26+00:00 Keerthy j-keerthy@ti.com 2016-10-26T08:12:32+00:00 5483456e919f08e51914d296e8720eaa0a288b68 Currently the specific set ops functions are directly called without any check for min/max current limits for a regulator. Check for them and proceed. Signed-off-by: Keerthy <j-keerthy@ti.com> Fixed checking of current limits: Signed-off-by: Simon Glass <sjg@chromium.org> 
Currently the specific set ops functions are directly
called without any check for min/max current limits for a regulator.
Check for them and proceed.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Fixed checking of current limits:
Signed-off-by: Simon Glass <sjg@chromium.org>
power: regulator: Add limits checking while setting voltage 2016-11-26T00:58:09+00:00 Keerthy j-keerthy@ti.com 2016-10-26T08:12:31+00:00 eaadcf38ddfe23aee9c3a85a96d4103f5398fc5e Currently the specific set ops functions are directly called without any check for voltage limits for a regulator. Check for them and proceed. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Fixed checking of voltate limits: Signed-off-by: Simon Glass <sjg@chromium.org> 
Currently the specific set ops functions are directly
called without any check for voltage limits for a regulator.
Check for them and proceed.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Fixed checking of voltate limits:
Signed-off-by: Simon Glass <sjg@chromium.org>
power: regulator: Introduce regulator_set_value_force function 2016-11-25T17:00:04+00:00 Keerthy j-keerthy@ti.com 2016-10-26T08:12:30+00:00 2f5d532f3b8a7697dc1b5700000b1e350323d50c In case we want to force a particular value on a regulator irrespective of the min/max constraints for testing purposes one can call regulator_set_value_force function. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
In case we want to force a particular value on a regulator
irrespective of the min/max constraints for testing purposes
one can call regulator_set_value_force function.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
power: twl6030: fix code refactoring 2016-10-24T12:04:38+00:00 Nicolae Rosia nicolae.rosia@gmail.com 2016-10-13T10:47:53+00:00 28a3a43d7be74000a0d480f6f32e31c5ff22d4bc Commit a85362fb3e1fc7833723accddbbae431091d06b8 refactored the code but the register read ended up in the wrong if branch. Currently, the else branch checks a variable which is always 0. Signed-off-by: Nicolae Rosia <nicolae_rosia@mentor.com> Reviewed-by: Tom Rini <trini@konsulko.com> 
Commit a85362fb3e1fc7833723accddbbae431091d06b8 refactored the code
but the register read ended up in the wrong if branch.
Currently, the else branch checks a variable which is always 0.

Signed-off-by: Nicolae Rosia <nicolae_rosia@mentor.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
libfdt: Sync fdt_for_each_subnode() with upstream 2016-10-13T20:10:32+00:00 Simon Glass sjg@chromium.org 2016-10-02T23:59:29+00:00 df87e6b1b815ae3484ea2aa7c53b90af382eae1b The signature for this macro has changed. Bring in the upstream version and adjust U-Boot's usages to suit. Signed-off-by: Simon Glass <sjg@chromium.org> Update to drivers/power/pmic/palmas.c: Signed-off-by: Keerthy <j-keerthy@ti.com> Change-Id: I6cc9021339bfe686f9df21d61a1095ca2b3776e8 
The signature for this macro has changed. Bring in the upstream version and
adjust U-Boot's usages to suit.

Signed-off-by: Simon Glass <sjg@chromium.org>
Update to drivers/power/pmic/palmas.c:
Signed-off-by: Keerthy <j-keerthy@ti.com>

Change-Id: I6cc9021339bfe686f9df21d61a1095ca2b3776e8
Merge git://git.denx.de/u-boot-dm 2016-10-13T00:48:43+00:00 Tom Rini trini@konsulko.com 2016-10-13T00:48:43+00:00 79493609c5300be6cc555ab8bd38971360b381f6