u-boot.git/drivers/power, branch v2017.05

power: Convert CONFIG_PMIC_AS3722 to Kconfig

2017-04-30T14:29:50+00:00

This converts the following to Kconfig:
   CONFIG_PMIC_AS3722

Signed-off-by: Simon Glass

power: Move as3722 pmic to pmic/ directory

2017-04-30T14:29:49+00:00

Most of the PMICs are in the drivers/power/pmic/ directory. Move this one
there.

Signed-off-by: Simon Glass

power: Rename CONFIG_AS3722_POWER to CONFIG_PMIC_AS3722

2017-04-30T14:29:47+00:00

Before converting this to Kconfig, rename it to match the other PMICs.

Signed-off-by: Simon Glass

sunxi: Enable AXP221s in I2C mode with the R40 SoC

2017-04-20T11:30:00+00:00

The R40 SoC uses the AXP221s in I2C mode to supply power.

Some regulator's common usages have changed, and also the recommended
voltage for existing usages have changed. Update the defaults to match.

Signed-off-by: Chen-Yu Tsai 
Acked-by: Maxime Ripard

sunxi: prepare for sharing MACH_SUN8I_H3 config symbol

2017-04-05T09:33:17+00:00

The Allwinner H5 is very close to the H3 SoC, but has ARMv8 cores.
To allow sharing the clocks, GPIO and driver code easily, create an
architecture agnostic MACH_SUNXI_H3_H5 Kconfig symbol.
Rename the existing symbol to MACH_SUNXI_H3_H5 where code is shared and
let it be selected by a new shared Kconfig option.

Signed-off-by: Andre Przywara 
Acked-by: Maxime Ripard

sunxi: power: axp809.c: Fix aldo1-2 being disabled for mvolt != 0

2017-03-09T02:26:02+00:00

The execution flow is currently like this for aldo_num == 1 or 2:

int axp_set_aldo(int aldo_num, unsigned int mvolt)
{
...
	if (mvolt == 0)
		return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1,
				AXP809_OUTPUT_CTRL1_ALDO1_EN << (aldo_num - 1));
...
	return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1,
 				AXP809_OUTPUT_CTRL1_ALDO1_EN << (aldo_num - 1));
 }

I.e. aldo1 and aldo2 will always be disabled. This patch fixes it by
setting (rather than clearing) the enable bit when mvolt != 0.

Signed-off-by: Rask Ingemann Lambertsen 
Fixes: 795857df413a ("sunxi: power: add AXP809 support")

power: pmic: add the max8997 controller for DM

2017-02-09T05:28:37+00:00

Add the max8997 controller for Driver model.
Exynos4210 is using max8997 pmic controller.
(pmic_max8997.c should be deprecated.)

Signed-off-by: Jaehoon Chung 
Reviewed-by: Simon Glass

Merge git://git.denx.de/u-boot-dm

2017-02-08T21:24:44+00:00

regulator: palmas: Fix smps6 - smps9 indices

2017-02-08T21:24:27+00:00

The array indices used currently are dispalaced by 1 for
SMPS6 through SMPS10 in the respective places of voltage and ctrl
arrays hence fix the same as to assign the right voltage and ctrl
registers.

Signed-off-by: Keerthy

dm: core: Replace of_offset with accessor

2017-02-08T13:12:14+00:00

At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass