u-boot.git/drivers/power, branch v2018.07-rc2

power: domain: bcm6328: convert to use live dt

2018-06-01T13:56:02Z

Signed-off-by: Álvaro Fernández Rojas Reviewed-by: Simon Glass Reviewed-by: Daniel Schwierzeck

sandbox: Rewrite i2c_pmic_emul.c to support PMIC with 3 bytes transmission

2018-05-18T06:27:26Z

This change enables support for MC34708 PMIC in sandbox. Now we can emulate the I2C transfers larger than 1 byte. Notable changes for this driver: - From now on the register number is not equal to index in the buffer, which emulates the PMIC registers - The PMIC register's pool is now dynamically allocated up till 64 regs * 3 bytes each = 192 B Signed-off-by: Lukasz Majewski Reviewed-by: Simon Glass

pmic: dm: Add support for MC34708 for PMIC DM

2018-05-18T06:27:26Z

This patch adds support for MC34708 PMIC, to be used with driver model (DM). Signed-off-by: Lukasz Majewski Reviewed-by: Simon Glass

pmic: dm: Rewrite pmic_reg_{read|write|clrsetbits} to support 3 bytes transmissions

2018-05-18T06:27:26Z

This commit provides support for transmissions larger than 1 byte for PMIC devices used with DM (e.g. MC34708 from NXP). Signed-off-by: Lukasz Majewski Reviewed-by: Simon Glass

pmic: Add support for setting transmission length in uclass private data

2018-05-18T06:27:26Z

The struct uc_pmic_priv's trans_len field stores the number of types to be transmitted per PMIC transfer. Signed-off-by: Lukasz Majewski Reviewed-by: Simon Glass

power: as3722: fix ldo_get/set_enable for ldo index bigger than 7

2018-05-10T23:34:20Z

Fix ldo_get_enable() and ldo_set_enable() functions for LDOs with an index > 7. Turns out there are actually two separate AS3722_LDO_CONTROL registers AS3722_LDO_CONTROL0 and AS3722_LDO_CONTROL1. Actually make use of both. While at it also actually use the enable parameter of the ldo_set_enable() function which now truly allows disabling as opposed to only enabling LDOs. Signed-off-by: Marcel Ziswiler Signed-off-by: Tom Warren

Merge git://git.denx.de/u-boot-mmc

2018-05-08T17:47:39Z

power: regulator: Add support for stm32-vrefbuf

2018-05-08T13:07:39Z

Add regulator driver for STM32 voltage reference buffer which can be used as voltage reference for ADCs, DACs and external components through dedicated VREF+ pin. Signed-off-by: Fabrice Gasnier Signed-off-by: Patrice Chotard

power: pmic: stpmu1: Add regulator bindings

2018-05-08T13:07:38Z

Add regulator bindings to get access to regulator managed by drivers/power/regulator/stpmu1.c regulator driver. Signed-off-by: Christophe Kerello Signed-off-by: Patrick Delaunay Signed-off-by: Patrice Chotard

power: regulator: stpmu1: Introduce stpmu1 driver

2018-05-08T13:07:38Z

Enable support for the regulator functions of the STPMU1X PMIC. The driver implements get/set api for the various BUCKS and LDOs supported by the PMIC device. This driver is controlled by a device tree node which includes voltage limits. Signed-off-by: Christophe Kerello Signed-off-by: Patrick Delaunay Signed-off-by: Patrice Chotard