u-boot.git/drivers/power, branch v2020.04

dm: arm64: ls1046a: add i2c DM support

2020-03-30T02:42:13+00:00

This supports i2c DM and enables CONFIG_DM_I2C
for SoC LS1046A

Signed-off-by: Biwen Li 
Signed-off-by: Priyanka Jain

power-domain: fix hang in endless loop on i.MX8

2020-03-10T20:29:38+00:00

Currently when booting the kernel on i.MX8 U-Boot hangs in an
endless loop when switching off dma, connectivity or lsio power
domains during device removal. It hapens first when removing
gpio0 (gpio@5d080000) device, here its power domain device
'lsio_gpio0' is obtained for switching off power. Since the
obtained 'lsio_gpio0' device is removed afterwards, its power
domain is also switched off and here the parent power domain
device 'lsio_power_domain' is optained for switching off the
power. Thereafter, when the obtained 'lsio_power_domain' is
removed, device_remove() removes its first child 'lsio_gpio0'.
During this child removal the 'lsio_power_domain' device is
obtained again for switching and when removing it later,
the same child removal is repeated, so we are stuck in an
endless loop. Below is a snippet from dm tree on i.MX8QXP
for better illustration of the DM devices relationship:

 Class     Index  Probed  Driver                Name
-----------------------------------------------------------
 root          0  [ + ]   root_driver           root_driver
...
 simple_bus    0  [ + ]   generic_simple_bus    |-- imx8qx-pm
 power_doma    0  [ + ]   imx8_power_domain     |   |-- lsio_power_domain
 power_doma    1  [ + ]   imx8_power_domain     |   |   |-- lsio_gpio0
 power_doma    2  [ + ]   imx8_power_domain     |   |   |-- lsio_gpio1

Do not remove a power domain device if it is a parent of the
currently controlled device.

Fixes: 52edfed65de9 ("dm: core: device: switch off power domain after device removal")
Signed-off-by: Anatolij Gustschin 
Reported-by: Oliver Graute 
Reported-by: Fabio Estevam 
Reviewed-by: Simon Glass 
Reviewed-by: Lokesh Vutla 
Tested-by: Fabio Estevam

Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

2020-02-11T15:58:41+00:00

sandbox conversion to SDL2
TPM TEE driver
Various minor sandbox video enhancements
New driver model core utility functions

regulator: fix: Move code to enable gpio regulator to pre_probe from ofdata_to_platdata

2020-02-10T23:00:38+00:00

The commit e8e9715df2d4 ("regulator: fixed: Modify enable-active-high behavior")
fixed the regulator driver behavior when 'enable-active-high' is defined.
Unfortunately, this patch used dm_regulator_platdata()'s "boot_on" member
to set GPIOD_IS_OUT_ACTIVE flag and enable the regulator.

The issue here is that regulator_common_ofdata_to_platdata() is called
_before_ regulator_pre_probe() function in which the 'regulator-boot-on'
property is asserted.

As a result the GPIOD_IS_OUT_ACTIVE flag is not set and gpio_request_by_name()
called in the former function is not enabling the regulator.
This is problematic for e.g. i.MX ethernet driver, which then tries to
perform initialization without power (and fails).

The solution here is to explicitly enable regulator in regulator_pre_probe()
callback only when 'regulator-boot-on' property is present in device tree.
The GPIOD_IS_OUT_ACTIVE flag is not set at all, but relevant gpio is
requested.

Signed-off-by: Lukasz Majewski 
Reviewed-by: Patrice Chotard 
Tested-by: Patrice Chotard

dm: core: Create a new header file for 'compat' features

2020-02-06T02:33:46+00:00

At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass

dm: core: Require users of devres to include the header

2020-02-06T02:33:46+00:00

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass 
Reviewed-by: Anatolij Gustschin

power-domain: Rename free() to rfree()

2020-02-06T02:33:46+00:00

This function name conflicts with our desire to #define free() to
something else on sandbox. Since it deals with resources, rename it to
rfree().

Signed-off-by: Simon Glass 
Reviewed-by: Anatolij Gustschin

sandbox: pmic: Correct i2c pmic emulator platdata method

2020-02-06T02:33:46+00:00

This currently reads the uclass's private data in the ofdata_to_platdata
method which is not allowed, since the uclass has not read it from the
device tree. This happens in the probe method.

Fix it by adding a probe() method and moving the code there.

Signed-off-by: Simon Glass

dm: pci: Update the PCI read_config() method to const dev *

2020-02-06T02:33:45+00:00

At present this method uses a non-const udevice pointer, but the call
should not modify the device. Use a const pointer.

Signed-off-by: Simon Glass

power: regulator: add driver for Dialog DA9063 PMIC

2020-01-28T00:54:20+00:00

Add a driver for the regulators in the the DA9063 PMIC.

Robert Beckett: move regulator modes to header so board code can set
modes. Correct mode mask used in ldo_set_mode.
Add an option CONFIG_SPL_DM_REGULATOR_DA9063.

Signed-off-by: Martin Fuzzey 
Signed-off-by: Robert Beckett